Rob, when it came time to install the hinges, where it says to use
washers to shim the hinge ..... I used milled fiber as a bed for the
hinges .... tightened just enough to get the doors nearly 'flush'. Did
the same thing with the gas spring mount to the cabin top.
Linn
Rob Kochman wrote:
> Thanks, guys... my main concern at this point is whether to keep going
> with mounting the door to the hinges, given this proud spot. I'm sure
> I'll have to deal with high/low spots, but wasn't sure if 2-3 32nds was
> too much to deal with with sanding/filling. I suppose worst case I
> could always fill and re-drill the holes in the door if it doesn't work out.
>
> Thanks again...
>
> -Rob
