Okay=2C it has been quite a number of years since my organic chemistry days
=2C but indeed denatured alcohol may have methanol added to the ethanol so
that it cannot be easily converted to drinkable ethanol=2C but basically me
thanol is just a primary alcohol containing only one carbon atom=2C four hy
drogen and one oxygen. Isopropyl alcohol has three carbon atoms=2C eight hy
drogens and one oxygen. Isopropyl comes in different purities=2C some with
higher water concentrations than others. One more distilled then other.I wo
uld think that ethanol=2C denatured alcohol=2C or high or low grade isoprop
yl would all be safe for plexi...at least that has been my experience with
my RV 10=2C all my RC airplanes and the plastic canopies on my Ravell and M
onogram plastic models as a kid. Has someone had a bad experience with meth
anol=2C not to be confused with methane...your spouse's gas after that rich
dinner. Thanks for bringing me back to my organic chemistry atom model bui
lding days in undergrad.Now I just build teeth and planes=2C what ever happ
ened to all that knowledge I once had...so sad! John G> Date: Mon=2C 17 Nov
2008 19:12:19 -0700> From: apilot2@gmail.com> To: rv10-list@matronics.com>
Subject: Re: plexiglass cleaning> > --> RV10-List message poste
d by: "Kelly McMullen" <apilot2@gmail.com>> > I would avoid denatured alcoh
ol=2C as it contains methanol. Either> Isopropyl or as Tim suggested=2C ker
osene are safe for plexi.> > On Mon=2C Nov 17=2C 2008 at 5:21 PM=2C John Go
nzalez <indigoonlatigo@msn.com> wrote:>> If denatured alcohol doesn't work
get a plexiglass cleaner=2C it has some form>> of petroleum distilates that
microscopically clean craze lines from the>> plexi glass and it might also
remove the duct tape adhessive.>>>> I have had no problems using the denat
ured alcohol=2C but maybe others can>> chime in.>>>> John G.>>>>> Subject:
plexiglass cleaning>>> From: ghale5224@aol.com>>> Date: Mon=2C 1
7 Nov 2008 15:53:07 -0800>>> To: rv10-list@matronics.com>>>>>> --> RV10-Lis
t message posted by: "greghale" <ghale5224@aol.com>>>>>>> OK I know I have
probably done the bad deed=2C but I used a combination of>>> masking tape a
nd duct tape to retain the plastic sheet on my windows while I>>> was doing
some body work. You probably already know that the duct tape left>>> globs
of adhesive behind when I tried removing it. Is there a product I can>>> u
se to remove the adhesive safely without destroying my windows and>>> winds
hield. The duct tape has been on the windows for almost a year.>>>>>> Thank
s...Greg>>>>>> -------->>> Greg Hale rv10 -- N210KH>>> www.nwacaptain.com>>
>>>>>>>>>>>>> Read this topic online here:>>>>>> http://forums.matronics.co
m/viewtopic.php?p=214784#214784>>>>>>>>>>>>>>>>>>>>>>>> Archive Search &
Download=2C 7-Day Browse=2C Chat=2C FAQ=2C>> >=========
=========> > >
