I had my window replaced by a professional chosen by my insurer. I
believe he routed it out. Robert
Sent from my iPhone
Robert E. Brunkenhoefer
Brunkenhoefer Law Firm, P.C.
520 Lawrence St.
Corpus Christi, Texas 78401
Phone: 361-888-8808
Facsimile: 361-888-6753
robert@brunklaw.com
On Nov 16, 2009, at 7:34 PM, Aaron Gleixner
<aarongleixner@sbcglobal.net> wrote:
> I just got off the phone with Van's after paying $470 for a new
> front window. I had approximately 50 small cracks starting at the
> glue joint, and extending about 1/8 inch beyond the glue joint.
> After reading all the warnings about not clamping when glueing the
> windows, I added a clamp in one location to hold the plexi tight,
> and all the cracks started under the clamp. While clamping pressure
> may not be the only variable for crack formation, it is definitely a
> strong contributing factor. So for those about to complete this
> step, avoid the clamps, and use plenty of glue to bridge any small
> gaps that might result.
>
> Now for the question. Has anyone else had to remove a front
> window? At this point, I only need to remove the glue joint. How
> was it accomplished? Van's said someone routed out a window, but I
> was wondering if lots of heat from a heat gun, and a little prying
> might separate the glue from the fiberglass. Any suggestions would
> be greatly appreciated.
>
> Aaron
>
>
