Re: Tips on removal of front window and lessons learned

Next Msg:		David McNeill		Nav and strobe lights
Previous Msg:		Perry, Phil		RE: Tips on removal of front window and lessons learned
Maybe in Reply-To:		Aaron Gleixner		Tips on removal of front window and lessons learned
Next in Thread:		Jeff Carpenter		Re: Tips on removal of front window and lessons learned

Subject:		Re: Tips on removal of front window and lessons learned
From:		Linn Walters (pitts_pilot@bellsouth.net)
Date:		Thu Nov 19 - 7:21 AM

We rough trimmed the plastic on the bandsaw, used a 4" grinder to get 
closer and then used a variety of sanders for the finish.  I'll probably 
go back and put a rounded edge on them before I install them.
Linn
\Perry, Phil wrote:
> 
> Has anyone used a Fein Multimaster for the cut?  That has been my plan
> up to this point.
> 
> I performed a test cut by putting some plexi in the deep freeze and then
> cutting it.  No issues.
> 
> Phil
>