---------------------------------------------------------- Aerobatic-List Digest Archive --- Total Messages Posted Thu 09/25/03: 3 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 08:53 AM - Re: One Design builders? (Ron C) 2. 09:44 AM - Re: One Design builders? (Rick Caldwell) 3. 01:32 PM - Re: One Design builders? (Ron C) ________________________________ Message 1 _____________________________________ Time: 08:53:01 AM PST US From: "Ron C" Subject: RE: Aerobatic-List: One Design builders? --> Aerobatic-List message posted by: "Ron C" Same here. I need a project or I don't have much focus in life. I'm doing the OD because I have sheet metal exp via the Rocket so the OD will be new materials and techniques. By the way I have plans for a plane called a shockwave 200 if you really want to scratch build. It looks like a laser 200. Ron -----Original Message----- From: owner-aerobatic-list-server@matronics.com [mailto:owner-aerobatic-list-server@matronics.com] On Behalf Of Gkb5577@aol.com Subject: Re: Aerobatic-List: One Design builders? --> Aerobatic-List message posted by: Gkb5577@aol.com Ron: I'm not a OD but am starting the look for another project plane--danged if I don't more enjoyment out of building the dern' things. Col Geoff == direct advertising on the Matronics Forums. == http://www.matronics.com/trouble-report == == ________________________________ Message 2 _____________________________________ Time: 09:44:18 AM PST US From: "Rick Caldwell" Subject: Re: Aerobatic-List: One Design builders? --> Aerobatic-List message posted by: "Rick Caldwell" Hi Ron, I'm one. I bought my One Design as an almost finished project. I've had the engine rebuilt by Barrett Performance (200 hp -A1A), I've done all the systems, panel, cooling plenum, etc. I am just finishing up wiring the sensors for the Rocky Mtn uMonitor and expect to get it in the air this weekend. I thought the RV-6 I built and the 1D were the ideal combination but you have just bested that. At least I can carry folded up bicycles :) Rick Caldwell Melbourne, FL 136RC 137RC >From: "Ron C" >Reply-To: aerobatic-list@matronics.com >To: >Subject: Aerobatic-List: One Design builders? >Date: Wed, 24 Sep 2003 14:16:03 -0600 > >--> Aerobatic-List message posted by: "Ron C" > > > Hi Aerobatic nuts I am a new One Design builder and am looking to hook >up with other OD builders for mutual exchange/support/questions etc. Are >there any OD guys on this list? > >Currently I fly a Harmon Rocket II which I completed in '99. > >Ron Carter >Metropolis Design >ronc@metropolisdesign.com > >900 North 400 West, Bldg 13, North Salt Lake, Utah, 84054 - (801) >298-0406 > > Frustrated with dial-up? Get high-speed for as low as $29.95/month (depending on the local service providers in your area). https://broadband.msn.com ________________________________ Message 3 _____________________________________ Time: 01:32:15 PM PST US From: "Ron C" Subject: RE: Aerobatic-List: One Design builders? --> Aerobatic-List message posted by: "Ron C" Rick- So do you have a plenum over your engine? If so whose is it? I have thought about one for a while on the rocket. Also I have 10:1 pistons and flowed cyls on the Rocket. What does Barrett do to get 200hp from his 360's? Did you go with a constant speed prop? Did you buy much stuff from Rourke or other specialty suppliers? Ron -----Original Message----- From: owner-aerobatic-list-server@matronics.com [mailto:owner-aerobatic-list-server@matronics.com] On Behalf Of Rick Caldwell Subject: Re: Aerobatic-List: One Design builders? --> Aerobatic-List message posted by: "Rick Caldwell" --> Hi Ron, I'm one. I bought my One Design as an almost finished project. I've had the engine rebuilt by Barrett Performance (200 hp -A1A), I've done all the systems, panel, cooling plenum, etc. I am just finishing up wiring the sensors for the Rocky Mtn uMonitor and expect to get it in the air this weekend. I thought the RV-6 I built and the 1D were the ideal combination but you have just bested that. At least I can carry folded up bicycles :) Rick Caldwell Melbourne, FL 136RC 137RC >From: "Ron C" >Reply-To: aerobatic-list@matronics.com >To: >Subject: Aerobatic-List: One Design builders? >Date: Wed, 24 Sep 2003 14:16:03 -0600 > >--> Aerobatic-List message posted by: "Ron C" >--> > > > Hi Aerobatic nuts I am a new One Design builder and am looking to >hook up with other OD builders for mutual exchange/support/questions >etc. Are there any OD guys on this list? > >Currently I fly a Harmon Rocket II which I completed in '99. > >Ron Carter >Metropolis Design >ronc@metropolisdesign.com > >900 North 400 West, Bldg 13, North Salt Lake, Utah, 84054 - (801) >298-0406 > > Frustrated with dial-up? Get high-speed for as low as $29.95/month (depending on the local service providers in your area). https://broadband.msn.com == direct advertising on the Matronics Forums. == http://www.matronics.com/trouble-report == ==