---------------------------------------------------------- AeroElectric-List Digest Archive --- Total Messages Posted Sat 02/08/03: 12 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 09:55 AM - voltage regulators (TimRhod@aol.com) 2. 10:16 AM - Re: voltage regulators (Robert L. Nuckolls, III) 3. 10:18 AM - Re: OV circuit breaker tripping (Robert L. Nuckolls, III) 4. 10:22 AM - Re: Ground Block (Robert L. Nuckolls, III) 5. 10:23 AM - Re: voltage regulators (richard@riley.net) 6. 11:23 AM - Re: Best LED color for preserving night (Robert L. Nuckolls, III) 7. 11:46 AM - Re: Best LED color for preserving night vision (John Rourke) 8. 12:07 PM - Re: Ground Block (Jim Pack) 9. 12:08 PM - Ground Block (Jim Pack) 10. 12:26 PM - Re: Best LED color for preserving night vision (Rico Voss) 11. 01:09 PM - Re: Best LED color for preserving night vision (John Schroeder) 12. 02:22 PM - My Web Site Finally (Eric M. Jones) ________________________________ Message 1 _____________________________________ Time: 09:55:36 AM PST US From: TimRhod@aol.com Subject: AeroElectric-List: voltage regulators --> AeroElectric-List message posted by: TimRhod@aol.com Can any one tell me where they usually mount voltage regulators in a canard pusher? I seems with three or four wires needing to go to the panel, warning light, panel ground, and only one going to the alternator that it would be best to put it in the nose. Tim Rhodenbaugh, Velocity XL, timrhod@aol.com Thanks ________________________________ Message 2 _____________________________________ Time: 10:16:51 AM PST US From: "Robert L. Nuckolls, III" Subject: Re: AeroElectric-List: voltage regulators --> AeroElectric-List message posted by: "Robert L. Nuckolls, III" At 12:54 PM 2/8/2003 -0500, you wrote: >--> AeroElectric-List message posted by: TimRhod@aol.com > >Can any one tell me where they usually mount voltage regulators in a canard >pusher? I seems with three or four wires needing to go to the panel, warning >light, panel ground, and only one going to the alternator that it would be >best to put it in the nose. Tim Rhodenbaugh, Velocity XL, timrhod@aol.com >Thanks That would be my choice. Bob . . . |-------------------------------------------------------| | The man who does not read good books has no advantage | | over the man who cannot read them. | | - Mark Twain | |-------------------------------------------------------| ________________________________ Message 3 _____________________________________ Time: 10:18:25 AM PST US From: "Robert L. Nuckolls, III" Subject: Re: AeroElectric-List: OV circuit breaker tripping --> AeroElectric-List message posted by: "Robert L. Nuckolls, III" At 04:27 PM 2/7/2003 -0800, you wrote: >--> AeroElectric-List message posted by: "John Karnes" > >Bob- > I have an auto conversion engine with nippodenso alternator. It has an >internal voltage regulator. After a really bad overheating condition, the >OV circuit breaker is tripping every time the engine starts running. >Changing to the new "yellow lead" module didn't help. Can I assume the >regulator is faulty. If so, can I run the wire from the alternator into an >aftermarket regulator to fix this problem or do I need to purchase a whole >new alternator? Thanks. You can have the alternator repaired at an automotive shop . . . if the regulator is bad, they'll replace it. Did you notice the voltmeter in your airplane before the trip? Was it indeed running 16 volts or more? Bob . . . ________________________________ Message 4 _____________________________________ Time: 10:22:59 AM PST US From: "Robert L. Nuckolls, III" Subject: Re: AeroElectric-List: Ground Block --> AeroElectric-List message posted by: "Robert L. Nuckolls, III" At 04:03 PM 2/7/2003 -0700, you wrote: >--> AeroElectric-List message posted by: "Jim Pack" > >I am using the B&C Ground Block, however, the space on the engine site where >it is best placed, does not correspond to the space on the cabin side. They >need to be offset by a foot. So, I have riveted the two sides into the most >appropriate place for the application on the respective sides of the >firewall. Is that OK or do I need to wire them together with 2AWG? The idea was that all cranking currents would be carried by no part of the airframe or any components that held it together. Hence, the 5/16" brass bolt intended to connect cockpit side grounds with engine compartment grounds. It wouldn't hurt anything to run a fatwire jumper between them . . . Bob . . . ________________________________ Message 5 _____________________________________ Time: 10:23:53 AM PST US From: richard@riley.net Subject: Re: AeroElectric-List: voltage regulators --> AeroElectric-List message posted by: richard@riley.net At 12:15 PM 2/8/03 -0600, you wrote: >--> AeroElectric-List message posted by: "Robert L. Nuckolls, III" > > >At 12:54 PM 2/8/2003 -0500, you wrote: > >--> AeroElectric-List message posted by: TimRhod@aol.com > > > >Can any one tell me where they usually mount voltage regulators in a canard > >pusher? I seems with three or four wires needing to go to the panel, warning > >light, panel ground, and only one going to the alternator that it would be > >best to put it in the nose. Tim Rhodenbaugh, Velocity XL, timrhod@aol.com > >Thanks > > > That would be my choice. We always mount them to the canard bulkhead, between the lift tabs. ________________________________ Message 6 _____________________________________ Time: 11:23:13 AM PST US From: "Robert L. Nuckolls, III" Subject: Re: AeroElectric-List: Best LED color for preserving night vision --> AeroElectric-List message posted by: "Robert L. Nuckolls, III" At 01:24 AM 2/5/2003 -0800, you wrote: >--> AeroElectric-List message posted by: "James Foerster" > > >I'm designing a ceiling mounted headphone jack with integral LEDs for cabin >light. It will have both a white LED and another color. Initially, I was >thinking I would use red, but I vaguely recall that the military has >determined that another color, perhaps green, was better as long as this was >kept at a low level. A brief Google search found at least one reference >confirming this vague notion. http://www.corvus.com/kniffen.htm is an >astronomy reference. . . . it is indeed a vague notion. About 35 years ago, red flood lighting was standard in the small Cessnas . . . for lots of dollars extra, one could install the optional red or blue/white post lights. One can find about as many opinion/reason combinations as there are pilots . . . some of whom will have never flown at night. EVERY color of light, if kept at a level just bright enough to see that all is well, will probably do just fine. Individuals may find that they favor or have problems with one color over another but I'll bet that has more to do with individual physiology than for any standard rules-of-thumb for cockpit lighting. Besides, if you're using flood lighting, changing colors later to suit your personal preferences is easy . . . Bob . . . ________________________________ Message 7 _____________________________________ Time: 11:46:53 AM PST US From: John Rourke Subject: Re: AeroElectric-List: Best LED color for preserving night vision --> AeroElectric-List message posted by: John Rourke I bought one of those LED gooseneck lights with 6 LEDs in it - but I'm replacing them with two red, 2 green and 2 blue LEDs, and a 6-position DIP switch to program whatever color I want. It will be interesting to discover what color I find to be most effective, and what others prefer. -John R. (Actually, maybe I'll put in TWO 6p dipswitches, and a on-off-on DPST so I can compare two different colors in flight) > > At 01:24 AM 2/5/2003 -0800, you wrote: > >>--> AeroElectric-List message posted by: "James Foerster" >> >> >>I'm designing a ceiling mounted headphone jack with integral LEDs for cabin >>light. It will have both a white LED and another color. Initially, I was >>thinking I would use red, but I vaguely recall that the military has >>determined that another color, perhaps green, was better as long as this was >>kept at a low level. A brief Google search found at least one reference >>confirming this vague notion. http://www.corvus.com/kniffen.htm is an >>astronomy reference. > > > > . . . it is indeed a vague notion. About 35 years ago, red > flood lighting was standard in the small Cessnas . . . for lots > of dollars extra, one could install the optional red or blue/white > post lights. One can find about as many opinion/reason combinations > as there are pilots . . . some of whom will have never flown at > night. > > EVERY color of light, if kept at a level just bright enough > to see that all is well, will probably do just fine. Individuals > may find that they favor or have problems with one color over > another but I'll bet that has more to do with individual > physiology than for any standard rules-of-thumb for cockpit > lighting. Besides, if you're using flood lighting, changing > colors later to suit your personal preferences is easy . . . > > Bob . . . > > > > > > > > ________________________________ Message 8 _____________________________________ Time: 12:07:39 PM PST US From: "Jim Pack" Subject: Re: AeroElectric-List: Ground Block --> AeroElectric-List message posted by: "Jim Pack" So, you feel it is worth a hole in the firewall to connect the two grounds? - Jim > >I am using the B&C Ground Block, however, the space on the engine site where > >it is best placed, does not correspond to the space on the cabin side. They > >need to be offset by a foot. So, I have riveted the two sides into the most > >appropriate place for the application on the respective sides of the > >firewall. Is that OK or do I need to wire them together with 2AWG? > > The idea was that all cranking currents would be carried by > no part of the airframe or any components that held it together. > Hence, the 5/16" brass bolt intended to connect cockpit side > grounds with engine compartment grounds. It wouldn't hurt anything > to run a fatwire jumper between them . . . > > Bob . . . > ________________________________ Message 9 _____________________________________ Time: 12:08:59 PM PST US From: "Jim Pack" Subject: AeroElectric-List: Ground Block --> AeroElectric-List message posted by: "Jim Pack" What benefit does this offer? Is it corrosion, or is it interference with other electrical stuff, or what? - Jim > The idea was that all cranking currents would be carried by > no part of the airframe or any components that held it together. ________________________________ Message 10 ____________________________________ Time: 12:26:46 PM PST US From: Rico Voss Subject: Re: AeroElectric-List: Best LED color for preserving night vision --> AeroElectric-List message posted by: Rico Voss After 20+ years in the merchant marine, on the darkened bridge of a ship, I've learned that there is good reason for the traditional red lighting. I feel that the red lighting can be cranked up enough to be useful, yet still allows the eye to recover instantly when vision is taken back into the darkness outside the window. Other colors, turned up to a useful intensity, are harder to recover from. Of course, the option is to run any color at a lower level. But in general, my vote would be RED. --Richard ________________________________ Message 11 ____________________________________ Time: 01:09:09 PM PST US From: John Schroeder Subject: Re: AeroElectric-List: Best LED color for preserving night vision --> AeroElectric-List message posted by: John Schroeder John R. Where did you get the 6 LED gooseneck light? Thanks, John >I bought one of those LED gooseneck lights with 6 LEDs in it ________________________________ Message 12 ____________________________________ Time: 02:22:50 PM PST US From: "Eric M. Jones" Subject: AeroElectric-List: My Web Site Finally --> AeroElectric-List message posted by: "Eric M. Jones" Please check out and save the link for: www.PerihelionDesign.com All sorts of aero-related stuff for sale and in development. This site is best viewed with IE and a PC. Macs and Netscape seem to be a problem. I'm working on it. I made this wesite with a bunch of Webwizards from Excel and MSWord, so who knows? Regards, Eric M. Jones