Today's Message Index:
----------------------
1. 09:42 AM - Jabiru J400 Signed off today (Ian Scott)
2. 12:01 PM - Re: Re: Rrelay diagram for Microair PTT (Robert L. Nuckolls, III)
3. 01:50 PM - Re: Re: Rrelay diagram for Microair PTT (Mark Phillips)
Message 1
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Jabiru J400 Signed off today |
DATE_IN_FUTURE_12_24 (2.8 points) Date: is 12 to 24 hours after Received: date
--> AeroElectric-List message posted by: "Ian Scott" <jabiru22@yahoo.com.au>
Man am I happy.
Test flying as soon as I can.
Ian
Message 2
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Rrelay diagram for Microair PTT |
--> AeroElectric-List message posted by: "Robert L. Nuckolls, III" <bob.nuckolls@cox.net>
At 01:50 PM 10/3/2003 -0500, you wrote:
>--> AeroElectric-List message posted by: Mark Phillips <ripsteel@edge.net>
>
>Hi Bob - Just reading through the entire Microair installation
>Instructions and have a couple
>of Q's- on the Mic relay circuit cited below, should not the Mic Hi & Mic
>Lo connections to
>the radio be made to the NO contacts of the relays?
don't know why. you described the operation you wanted and I believe
the circuit I drew will do that. I didn't take time to noodle out
Microair's circuit . . . it probably does work as they intended
but I didn't have time to wade through their schematic and erratic
font displays.
>Could you please clarify the note in section 4.3- looks like a typo...
Yes, fixed it. Thanks for the heads up.
I've uploaded the corrected document.
>Thanks! Not tryin' to be picky, I'm just wiring mine up right now and
>don't want to see no
>smoke!
Not a problem, I understand.
Bob . . .
Message 3
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Rrelay diagram for Microair PTT |
--> AeroElectric-List message posted by: Mark Phillips <ripsteel@edge.net>
Ooops- sorry, my screw-up----I meant the Pilot Mic Hi & Co-pilot Mic Hi, not Mic
Lo- from the
drawing it appears that when the mic is keyed , which if I understand this, the
coil in the
relay is grounded, switching the contacts from the position shown, and the respective
circuit
from the radio to the mic will OPEN or am I that electrically challenged? 8-)
Not meaning to pester, but I'm getting a bald spot from all the head-scratchin'!
Mark do not archive
> on the Mic relay circuit cited below, should not the Mic Hi & Mic
> >Lo connections to the radio be made to the NO contacts of the relays?
>
> don't know why. you described the operation you wanted and I believe
> the circuit I drew will do that. I didn't take time to noodle out
> Microair's circuit . . . it probably does work as they intended
> but I didn't have time to wade through their schematic and erratic
> font displays.
>
> >Could you please clarify the note in section 4.3- looks like a typo...
>
> Yes, fixed it. Thanks for the heads up.
> I've uploaded the corrected document.
>
> >Thanks! Not tryin' to be picky, I'm just wiring mine up right now and
> >don't want to see no
> >smoke!
>
> Not a problem, I understand.
>
> Bob . . .
>
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|