----------------------------------------------------------
                           AeroElectric-List Digest Archive
                                      ---
                     Total Messages Posted Sun 10/05/03: 3
           ----------------------------------------------------------
 
 
Today's Message Index:
----------------------
 
     1. 09:42 AM - Jabiru J400 Signed off today  (Ian Scott)
     2. 12:01 PM - Re: Re: Rrelay diagram for Microair PTT  (Robert L. Nuckolls, III)
     3. 01:50 PM - Re: Re: Rrelay diagram for Microair PTT  (Mark Phillips)
 
 
 
________________________________  Message 1  _____________________________________


Time: 09:42:49 AM PST US
From: "Ian Scott" <jabiru22@yahoo.com.au>
Subject: AeroElectric-List: Jabiru J400 Signed off today
 DATE_IN_FUTURE_12_24 (2.8 points)  Date: is 12 to 24 hours after Received: date

--> AeroElectric-List message posted by: "Ian Scott" <jabiru22@yahoo.com.au>

Man am I happy.

Test flying as soon as I can.

Ian






________________________________  Message 2  _____________________________________


Time: 12:01:56 PM PST US
From: "Robert L. Nuckolls, III" <bob.nuckolls@cox.net>
Subject: Re: AeroElectric-List: Re: Rrelay diagram for Microair PTT

--> AeroElectric-List message posted by: "Robert L. Nuckolls, III" <bob.nuckolls@cox.net>

At 01:50 PM 10/3/2003 -0500, you wrote:
>--> AeroElectric-List message posted by: Mark Phillips <ripsteel@edge.net>
>
>Hi Bob - Just reading through the entire Microair installation 
>Instructions and have a couple
>of Q's- on the Mic relay circuit cited below, should not the Mic Hi & Mic 
>Lo connections to
>the radio be made to the NO contacts of the relays?

   don't know why. you described the operation you wanted and I believe
   the circuit I drew will do that. I didn't take time to noodle out
   Microair's circuit . . . it probably does work as they intended
   but I didn't have time to wade through their schematic and erratic
   font displays.

>Could you please clarify the note in section 4.3- looks like a typo...

   Yes, fixed it. Thanks for the heads up.
   I've uploaded the corrected document.

>Thanks!  Not tryin' to be picky, I'm just wiring mine up right now and 
>don't want to see no
>smoke!

   Not a problem, I understand.

   Bob . . .






________________________________  Message 3  _____________________________________


Time: 01:50:56 PM PST US
From: Mark Phillips <ripsteel@edge.net>
Subject: Re: AeroElectric-List: Re: Rrelay diagram for Microair PTT

--> AeroElectric-List message posted by: Mark Phillips <ripsteel@edge.net>

Ooops- sorry, my screw-up----I meant the Pilot Mic Hi & Co-pilot Mic Hi, not Mic
Lo- from the
drawing it appears that when the mic is keyed , which if I understand this, the
coil in the
relay is grounded, switching the contacts from the position shown, and the respective
circuit
from the radio to the mic will OPEN or am I that electrically challenged?  8-)

Not meaning to pester, but I'm getting a bald spot from all the head-scratchin'!
Mark  do not archive

> on the Mic relay circuit cited below, should not the Mic Hi & Mic
> >Lo connections to the radio be made to the NO contacts of the relays?
>
>    don't know why. you described the operation you wanted and I believe
>    the circuit I drew will do that. I didn't take time to noodle out
>    Microair's circuit . . . it probably does work as they intended
>    but I didn't have time to wade through their schematic and erratic
>    font displays.
>
> >Could you please clarify the note in section 4.3- looks like a typo...
>
>    Yes, fixed it. Thanks for the heads up.
>    I've uploaded the corrected document.
>
> >Thanks!  Not tryin' to be picky, I'm just wiring mine up right now and
> >don't want to see no
> >smoke!
>
>    Not a problem, I understand.
>
>    Bob . . .
>