----------------------------------------------------------
                           AeroElectric-List Digest Archive
                                      ---
                     Total Messages Posted Sat 05/13/06: 2
           ----------------------------------------------------------
 
 
Today's Message Index:
----------------------
 
     1. 11:02 AM - Ebay #9723825338  (Jerry Grimmonpre)
     2. 12:53 PM - Re: Ebay #9723825338  (Robert L. Nuckolls, III)
 
 
 
________________________________  Message 1  _____________________________________


Time: 11:02:13 AM PST US
From: "Jerry Grimmonpre" <jerry@mc.net>
Subject: AeroElectric-List: Ebay #9723825338

--> AeroElectric-List message posted by: "Jerry Grimmonpre" <jerry@mc.net>

Bob ...
Is this Gilchrist coax stripper suitable for RG-400?  It has three blades 
but does not list RG-400.  Gilchrist will not respond to questions.
Thanks ...
Jerry Grimmonpre' 








 
 
 



________________________________  Message 2  _____________________________________


Time: 12:53:44 PM PST US
From: "Robert L. Nuckolls, III" <nuckollsr@cox.net>
Subject: Re: AeroElectric-List: Ebay #9723825338

--> AeroElectric-List message posted by: "Robert L. Nuckolls, III" <nuckollsr@cox.net>

At 12:53 PM 5/13/2006 -0500, you wrote:

>--> AeroElectric-List message posted by: "Jerry Grimmonpre" <jerry@mc.net>
>
>Bob ...
>Is this Gilchrist coax stripper suitable for RG-400?  It has three blades
>but does not list RG-400.  Gilchrist will not respond to questions.
>Thanks ...
>Jerry Grimmonpre'

  Yes, that's the one I give away at the seminars. It's
  ADJUSTABLE. It will probably work for RG-400 as received
  but you can check the results of the cuts carefully and
  adjust as needed for optimization.

  Bob . . .