Today's Message Index:
----------------------
1. 06:36 AM - Re: AeroElectric-List Digest: 4 Msgs - 04/05/08 (Glen Matejcek)
2. 08:11 AM - 24-Pole Relay Needed (Don Curry)
3. 01:59 PM - Re: 24-Pole Relay Needed (Robert L. Nuckolls, III)
4. 03:05 PM - Re: 24-Pole Relay Needed (Bill Bradburry)
Message 1
INDEX | Back to Main INDEX |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: AeroElectric-List Digest: 4 Msgs - 04/05/08 |
><< I need to split my one nav antenna into both a nav and glide
>slope receiver. Where can I find an inexpensive splitter? >>
>
You could also contact Wentworth Aircraft. They have a huge supply of salvaged
bits and pieces for pretty cheap.
Glen Matejcek
Message 2
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | 24-Pole Relay Needed |
I need a couple of 24-pole relays for an avionics project. Would anyone
have a spare MD41-248 or MD41-24P they'd be willing to sell?
Thanks,
Don
Message 3
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: 24-Pole Relay Needed |
At 11:07 AM 4/6/2008 -0400, you wrote:
>
>
>I need a couple of 24-pole relays for an avionics project. Would anyone
>have a spare MD41-248 or MD41-24P they d be willing to sell?
>
>Thanks,
>
>Don
Sounds like you MIGHT be crafting a switching box for
sharing a single set of displays with multiple receivers.
The last time I needed that many poles I built an
etched circuit board to hold 12 dpdt minature relays.
If your search for single relay doesn't work out,
I can probably find the artwork I laid out for the
multiple relay assembly. You can order a batch of
3 boards for $59.
Bob . . .
Message 4
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | 24-Pole Relay Needed |
Perihelion Design sells an 18 pole relay to use as an 18-Pole CDI Switcher
for VOR/GPS Receiver.
It is $150 I think...
http://www.periheliondesign.com/18polerelays.htm
Bill B
-----Original Message-----
From: owner-aeroelectric-list-server@matronics.com
[mailto:owner-aeroelectric-list-server@matronics.com] On Behalf Of Robert L.
Nuckolls, III
Sent: Sunday, April 06, 2008 4:55 PM
Subject: Re: AeroElectric-List: 24-Pole Relay Needed
--> <nuckolls.bob@cox.net>
At 11:07 AM 4/6/2008 -0400, you wrote:
>
>
>I need a couple of 24-pole relays for an avionics project. Would
>anyone have a spare MD41-248 or MD41-24P they d be willing to sell?
>
>Thanks,
>
>Don
Sounds like you MIGHT be crafting a switching box for
sharing a single set of displays with multiple receivers.
The last time I needed that many poles I built an
etched circuit board to hold 12 dpdt minature relays.
If your search for single relay doesn't work out,
I can probably find the artwork I laid out for the
multiple relay assembly. You can order a batch of
3 boards for $59.
Bob . . .
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|