Today's Message Index:
----------------------
1. 04:24 PM - Diode Wiring (revenson@comcast.net (Roger Evenson))
2. 08:06 PM - Re: Diode Wiring (Robert L. Nuckolls, III)
Message 1
INDEX | Back to Main INDEX |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Just received the diode assembly from B&C for the main bus to endurance bus wiring.
The wiring diagram that came with it shows two of its terminals joined going
to the main bus. In the Aero Connection, Bob says only one of the terminals
goes to the main bus and the other two can be removed.
Please clarify--which is correct?
Thanks. Roger.
Message 2
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Diode Wiring |
At 11:19 PM 6/20/2008 +0000, you wrote:
>--=======AVGMAIL-485C6DBA0000======
>Content-Type: text/plain; charset=us-ascii
>
>
>Just received the diode assembly from B&C for the main bus to endurance
>bus wiring. The wiring diagram that came with it shows two of its
>terminals joined going to the main bus. In the Aero Connection, Bob says
>only one of the terminals goes to the main bus and the other two can be
>removed.
>
>Please clarify--which is correct?
Flip a coin . . . it doesn't matter much.
SOMETIMES . . . the two paralleled diodes
match close enough to sort-of share the
loads but It's poor practice to depend on
it. How big are your e-bus loads?
Bob . . .
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|