Today's Message Index:
----------------------
1. 08:13 AM - Kitplanes article on an Elegant LED driver (Robert L. Nuckolls, III)
2. 08:19 AM - Kitplanes article on an Elegant LED driver (Robert L. Nuckolls, III)
Message 1
INDEX | Back to Main INDEX |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Kitplanes article on an Elegant LED driver |
At 06:27 PM 10/10/2008 -0700, PSYCHOSE wrote:
>
>Hello Bob,
>
>While I would rather purchase your assembled units, I already have
>purchased the BuckPuck and would appreciate the parts list so that I could
>roll my own, unless you would be willing to send me the assembled unit
>minus the Buckpuck which I would solder in myself.
I've had a number of requests from folks who already have
Buck-Pucks on hand to supply filter kits for existing
LED supplies. I've posted a striped down filter kit
on the catalog page.
The Buck-Puck is cemented to the board with a little
dab of E6000 and then soldered.
Bob . . .
----------------------------------------)
( . . . a long habit of not thinking )
( a thing wrong, gives it a superficial )
( appearance of being right . . . )
( )
( -Thomas Paine 1776- )
----------------------------------------
Message 2
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Kitplanes article on an Elegant LED driver |
At 06:27 PM 10/10/2008 -0700, PSYCHOSE wrote:
>
>Hello Bob,
>
>While I would rather purchase your assembled units, I already have
>purchased the BuckPuck and would appreciate the parts list so that I could
>roll my own, unless you would be willing to send me the assembled unit
>minus the Buckpuck which I would solder in myself.
I've had a number of requests from folks who already have
Buck-Pucks on hand to supply filter kits for existing
LED supplies. I've posted a striped down filter kit
on the catalog page.
The Buck-Puck is cemented to the board with a little
dab of E6000 and then soldered.
P.S. Orders for 11 completely assembled kits are already
in hand. If anyone orders the -99 filter board sans Buck-Puck,
that counts toward the necessary total of 20 units to
trigger the investment in inventory.
Bob . . .
----------------------------------------)
( . . . a long habit of not thinking )
( a thing wrong, gives it a superficial )
( appearance of being right . . . )
( )
( -Thomas Paine 1776- )
----------------------------------------
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|