Today's Message Index:
----------------------
1. 01:59 AM - Re: Where have all the OV modules gone ? (Gilles Thesee)
2. 03:47 AM - Re: Where have all the OV modules gone ? (Gilles Thesee)
3. 06:19 PM - G3i Ignition ()
4. 07:16 PM - Alternator Aux (rckol)
Message 1
INDEX | Back to Main INDEX |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Where have all the OV modules gone ? |
Robert L. Nuckolls, III a crit :
> Hmmm . . . that was the OVM-14 which is part of their
> 505-1 kit but doesn't seem to be offered as a separate
> product. It appears they've overhauled the website.
> I'll cc Greg on this and see what's up.
>
Bob and all,
Thanks to all who responded.
I forgot to mention that the modules were intended for Rotax PM
alternators. Actually I convinced *two* buddies and am now looking for
two such modules or their up to date counterpart.
I would appreciate any further info.
Best regards,
--
Gilles
http://contrails.free.fr
Message 2
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Where have all the OV modules gone ? |
Bob Meyers a crit :
> <bobmeyers@meyersfamily.org>
>
> I just ordered an OVM-14 by itself and the kit which included another
> one. I had to call them to get the individual one. They wanted to
> know what I intended to do with it before they would sell it to me.
> The kit was for my PM alternator and the individual one was for a
> ground power installation per the Z-??? drawing. They were fine with
> that use.
Bob, Bob and all,
Thanks for responding. You pointed me to the correct product.
I'll try to contact them to get the individual modules, because the
capacitors and relays are already at hand, but otherwise, having the
whole 501 kit is no big deal.
Thanks again
Best regards,
--
Gilles
http://contrails.free.fr
Message 3
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
4/15/200
Hello Fellow Builders, I was just introduced to G3i ignition. See here:
http://www.g3ignition.com/
I am wondering if any fellow listers have any field experience with this
system or comments regarding the concept and implementation.
Thanks.
'OC' Says: "The best investment we can make is the effort to gather and
understand knowledge."
Message 4
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
I am considering the use of the PlanePower regulator to control a SD-20 alternator.
The regulator provides an Aux input that monitors for low voltage (or no
voltage due to crowbar trip), but I am told by PlanePower that the expected input
for low voltage monitoring is a half voltage (0-7 volt) output from an alternator.
I don't see any such output on the SD-20. Would it be reasonable to produce this
half voltage with a simple voltage divider made from a pair of identical resistors
between the bus voltage and ground or is there more to this than I am
seeing?
--------
rck
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=239429#239429
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|