---------------------------------------------------------- AeroElectric-List Digest Archive --- Total Messages Posted Tue 09/29/09: 8 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 06:27 AM - Re: Welding cable (Chris Stone) 2. 08:07 AM - Re: Welding cable (Robert L. Nuckolls, III) 3. 09:13 AM - Re: Welding cable (Ron Raby) 4. 09:24 AM - Re: Mounting BATT/START Relays (John McMahon) 5. 10:45 AM - Re: Welding cable (John McMahon) 6. 11:33 AM - Re: Welding cable (Robert L. Nuckolls, III) 7. 09:42 PM - Visio? (Tim Andres) 8. 10:41 PM - Re: Visio? (Vern Little) ________________________________ Message 1 _____________________________________ Time: 06:27:25 AM PST US From: Chris Stone Subject: RE: AeroElectric-List: Welding cable Bob... You've a great idea... Electronics: http://www.mouser.com/ Chris Stone RV-8 -----Original Message----- >From: "Robert L. Nuckolls, III" >Sent: Sep 28, 2009 1:47 PM >To: aeroelectric-list@matronics.com >Subject: RE: AeroElectric-List: Welding cable > > > >> >> I'm thinking about adding a page to the >> website too link to the hot prospects . . . > > Broke down and did it. See: > >http://aeroelectric.com/Sources.html > > . . . as readers discover additional web > sources for other unique materials or tools > that belong on this list are encouraged to > let me know about them. > > > Bob . . . > > --------------------------------------- > ( . . . a long habit of not thinking ) > ( a thing wrong, gives it a superficial ) > ( appearance of being right . . . ) > ( ) > ( -Thomas Paine 1776- ) > --------------------------------------- > > ________________________________ Message 2 _____________________________________ Time: 08:07:11 AM PST US From: "Robert L. Nuckolls, III" Subject: RE: AeroElectric-List: Welding cable At 08:23 AM 9/29/2009, you wrote: > >Bob... > >You've a great idea... > >Electronics: > >http://www.mouser.com/ got it. thanks. Bob . . . --------------------------------------- ( . . . a long habit of not thinking ) ( a thing wrong, gives it a superficial ) ( appearance of being right . . . ) ( ) ( -Thomas Paine 1776- ) --------------------------------------- ________________________________ Message 3 _____________________________________ Time: 09:13:34 AM PST US From: "Ron Raby" Subject: Re: AeroElectric-List: Welding cable To all: I have some Carol #2 welding cable in stock. I also have some #4 black tin coated extraflex. the marking on the cable : 4 AWG AWM 10070 105C 600V E42481 VW-1 CSA AWM I A/B 105C 600V FT1 LL59358. I also have green with the same specs. This Material is in my stockroom and we currently do not have requirements. I can sell this material for a dollar a foot. Contact me off list if you are interested. Regards Ron Raby www.advanceddesign.com ronr@advanceddesign.com ----- Original Message ----- From: "Robert L. Nuckolls, III" Sent: Tuesday, September 29, 2009 9:41 AM Subject: RE: AeroElectric-List: Welding cable > > > At 08:23 AM 9/29/2009, you wrote: >> >> >>Bob... >> >>You've a great idea... >> >>Electronics: >> >>http://www.mouser.com/ > > got it. thanks. > > > Bob . . . > > --------------------------------------- > ( . . . a long habit of not thinking ) > ( a thing wrong, gives it a superficial ) > ( appearance of being right . . . ) > ( ) > ( -Thomas Paine 1776- ) > --------------------------------------- > > > ________________________________ Message 4 _____________________________________ Time: 09:24:02 AM PST US Subject: Re: AeroElectric-List: Mounting BATT/START Relays From: John McMahon Mike, How about using a piece of 'all thread rod' through the firewall with a nut on each side of the firewall to secure it, then mount the contactors with another nut. Now either contactor can be removed from one side without disturbing the other. My .02 On Sat, Sep 26, 2009 at 12:02 PM, wrote: > > 9/26/2009 > > Hello Mike, You wrote: "........ this does not seem like a big deal to me > as they are fairly long lasting devices."** > > > John McMahon Lancair Super ES, S/N 170, N9637M (Reserved) ________________________________ Message 5 _____________________________________ Time: 10:45:20 AM PST US Subject: Re: AeroElectric-List: Welding cable From: John McMahon Bob For your Sources of Tools and Materials page, a good wire source, both 22759 and welding cable (red and black), we used Wiremasters and got excellent prices on all our wire and service was excellent. Our contact person was Deb Sullivan. http://www.wiremasters.net/ John McMahon Lancair Super ES, S/N 170, N9637M (Reserved) ________________________________ Message 6 _____________________________________ Time: 11:33:24 AM PST US From: "Robert L. Nuckolls, III" Subject: Re: AeroElectric-List: Welding cable At 12:34 PM 9/29/2009, you wrote: >Bob > >For your Sources of Tools and Materials page, a good wire source, >both 22759 and welding cable (red and black), we used Wiremasters >and got excellent prices on all our wire and service was excellent. >Our contact person was Deb Sullivan. Good hit. It's been added to the page . . . Bob . . . --------------------------------------- ( . . . a long habit of not thinking ) ( a thing wrong, gives it a superficial ) ( appearance of being right . . . ) ( ) ( -Thomas Paine 1776- ) --------------------------------------- ________________________________ Message 7 _____________________________________ Time: 09:42:03 PM PST US From: "Tim Andres" Subject: AeroElectric-List: Visio? Has anyone tried using Visio to draw their schematic? It looks like it will work but I'm not finding much in the way of automotive symbols i.e. solenoids relays etc. Can anyone recommend a free or cheap program for this? Thanks, Tim Andres ________________________________ Message 8 _____________________________________ Time: 10:41:00 PM PST US From: "Vern Little" Subject: Re: AeroElectric-List: Visio? Hi Tim. Go here: www.vx-aviation.com and follow the link near the top of the page for the free schematic software, library and design example from my RV-9A. Doesn't have everything but it's very easy to create symbols on the fly. Thanks, Vern Little -------------------------------------------------- From: "Tim Andres" Sent: Tuesday, September 29, 2009 9:37 PM Subject: AeroElectric-List: Visio? > > > > Has anyone tried using Visio to draw their schematic? It looks like it > will > work but I'm not finding much in the way of automotive symbols i.e. > solenoids relays etc. > Can anyone recommend a free or cheap program for this? > Thanks, Tim Andres > > > ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message aeroelectric-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/AeroElectric-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/aeroelectric-list Browse Digests http://www.matronics.com/digest/aeroelectric-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.