----------------------------------------------------------
                           AeroElectric-List Digest Archive
                                      ---
                     Total Messages Posted Sat 12/19/09: 2
           ----------------------------------------------------------
 
 
Today's Message Index:
----------------------
 
     1. 08:38 PM - Re:Powder coated panel  (speedy11@aol.com)
     2. 11:25 PM - Ammeter help  (Keith Burris)
 
 
 
________________________________  Message 1  _____________________________________


Time: 08:38:52 PM PST US
From: speedy11@aol.com
Subject: AeroElectric-List: Re:Powder coated panel


Matt,
Who is "they" and "them?"
Who did the work for you?
Stan Sutterfield
Do not archive

Here is  the full-resolution shot of the panel.  I used a textured power 
coat  that
looks really nice.  Same as I used on the engine baffles.   The silk screen
looks okay.  In retrospect, I think that I would have  power coated the 
panel gloss
black, did the silk screen, then had them put  a clear texture power coat
over the top.

For the right side control  panel, I'm having them use a "label" the full 
size of
the panel.  The  stuff looks just like the power coated panel in both 
texture
and  color.  The lettering, however is super crisp.  I'll post some  
pictures when
I get it back.  I also had them make up some similar  labels for the various
remote controls like the Alternate Air and Cabin  Heat.

Matt Dralle


________________________________  Message 2  _____________________________________


Time: 11:25:32 PM PST US
From: "Keith Burris" <klburris@frontiernet.net>
Subject: AeroElectric-List: Ammeter help


Folks;
Looking for some help in locating an ammeter installation kit of some sort,
similar to B&C AEC9035-1 (discontinued). Ideally, it would have a current
sensor such as a Tamura L08P050D15 (50 amp or a little smaller) with the
required signal processing built in and come with an edgewise 50-0-50 (or
30-0-30) analog panel meter. I was surprised there was not something already
made up (or at least easier to find) as I would think there would be a
market for it. All help greatly appreciated. Thanks in advance.

-- Keith


 

-------------------------------------------------------------------------------------
                       Other Matronics Email List Services
-------------------------------------------------------------------------------------
Post A New Message               aeroelectric-list@matronics.com
UN/SUBSCRIBE                     http://www.matronics.com/subscription
List FAQ                         http://www.matronics.com/FAQ/AeroElectric-List.htm
Web Forum Interface To Lists     http://forums.matronics.com
Matronics List Wiki              http://wiki.matronics.com
Full Archive Search Engine       http://www.matronics.com/search
7-Day List Browse                http://www.matronics.com/browse/aeroelectric-list
Browse Digests                   http://www.matronics.com/digest/aeroelectric-list
Browse Other Lists               http://www.matronics.com/browse
Live Online Chat!                http://www.matronics.com/chat
Archive Downloading              http://www.matronics.com/archives
Photo Share                      http://www.matronics.com/photoshare
Other Email Lists                http://www.matronics.com/emaillists
Contributions                    http://www.matronics.com/contribution
-------------------------------------------------------------------------------------

These Email List Services are sponsored solely by Matronics and through the 
generous Contributions of its members.