----------------------------------------------------------
                           AeroElectric-List Digest Archive
                                      ---
                     Total Messages Posted Sun 05/02/10: 4
           ----------------------------------------------------------
 
 
Today's Message Index:
----------------------
 
     1. 05:49 AM - Bulkhead connector  (Richard Girard)
     2. 07:36 AM - Re: Bulkhead connector  (Robert L. Nuckolls, III)
     3. 11:48 AM - Re: Bulkhead connector  (Richard Girard)
     4. 06:59 PM - Re: Bulkhead connector  (edleg)
 
 
 
________________________________  Message 1  _____________________________________


Time: 05:49:48 AM PST US
Subject: AeroElectric-List: Bulkhead connector
From: Richard Girard <aslsa.rng@gmail.com>

Folks, Sorry to weigh in on this so late, but I found the nifty PL 259
chassis connector (on the right in the photo) at Radio Shack during a parts
run on Friday. Part number is 278-0201. I already had a BNC cable so I
bought an adapter (PN 278-121), too.

Rick Girard

________________________________  Message 2  _____________________________________


Time: 07:36:38 AM PST US
From: "Robert L. Nuckolls, III" <nuckolls.bob@aeroelectric.com>
Subject: Re: AeroElectric-List: Bulkhead connector


At 07:39 AM 5/2/2010, you wrote:
>Folks, Sorry to weigh in on this so late, but I found the nifty PL 
>259 chassis connector (on the right in the photo) at Radio Shack 
>during a parts run on Friday. Part number is 278-0201. I already had 
>a BNC cable so I bought an adapter (PN 278-121), too.

    I guess I'm disconnected from the thread. How are
    you using these parts?

     Bob . . . 


________________________________  Message 3  _____________________________________


Time: 11:48:02 AM PST US
Subject: Re: AeroElectric-List: Bulkhead connector
From: Richard Girard <aslsa.rng@gmail.com>

Bob, I'm going to solder a piece of 3/32" brazing rod into the center lug of
the PL 259 chassis mount (the lug is drilled out to let it slip in for a
good mechanical attachment once the soldering is done), trim to appropriate
length and use it as an antenna for my hand held.

Rick

On Sun, May 2, 2010 at 9:23 AM, Robert L. Nuckolls, III <
nuckolls.bob@aeroelectric.com> wrote:

> nuckolls.bob@aeroelectric.com>
>
>
> At 07:39 AM 5/2/2010, you wrote:
>
>> Folks, Sorry to weigh in on this so late, but I found the nifty PL 259
>> chassis connector (on the right in the photo) at Radio Shack during a parts
>> run on Friday. Part number is 278-0201. I already had a BNC cable so I
>> bought an adapter (PN 278-121), too.
>>
>
>   I guess I'm disconnected from the thread. How are
>   you using these parts?
>
>    Bob . . .
>
>

________________________________  Message 4  _____________________________________


Time: 06:59:18 PM PST US
Subject: AeroElectric-List: Re: Bulkhead connector
From: "edleg" <ed_legault@yahoo.com>


Once you get the piece of brazing rod soldered in, and it cools down, you might
want to pack that area around the base of the antenna full of RTV to help make
it watertight.


Read this topic online here:

http://forums.matronics.com/viewtopic.php?p=296528#296528


 

-------------------------------------------------------------------------------------
                       Other Matronics Email List Services
-------------------------------------------------------------------------------------
Post A New Message               aeroelectric-list@matronics.com
UN/SUBSCRIBE                     http://www.matronics.com/subscription
List FAQ                         http://www.matronics.com/FAQ/AeroElectric-List.htm
Web Forum Interface To Lists     http://forums.matronics.com
Matronics List Wiki              http://wiki.matronics.com
Full Archive Search Engine       http://www.matronics.com/search
7-Day List Browse                http://www.matronics.com/browse/aeroelectric-list
Browse Digests                   http://www.matronics.com/digest/aeroelectric-list
Browse Other Lists               http://www.matronics.com/browse
Live Online Chat!                http://www.matronics.com/chat
Archive Downloading              http://www.matronics.com/archives
Photo Share                      http://www.matronics.com/photoshare
Other Email Lists                http://www.matronics.com/emaillists
Contributions                    http://www.matronics.com/contribution
-------------------------------------------------------------------------------------

These Email List Services are sponsored solely by Matronics and through the 
generous Contributions of its members.