Today's Message Index:
----------------------
1. 02:24 PM - Position Light Questions (Jerald Folkerts)
2. 07:34 PM - Re: Position Light Questions (Jared Yates)
Message 1
INDEX | Back to Main INDEX |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Position Light Questions |
At Sun-N-Fun, I purchased drop in replacement LED Bulbs for position lights
from PSA Enterprises. No problem, I'm committed to using them for my SR2500
Super Rebel day/night VFR objective. Next, I went to the Parts Mart and
purchased what appeared to be three good Grimes position lights, the
teardrop shape for the red and green, and a typical tail assembly. This
year, many of the things were vacuum packed and you couldn't look at them
closely. When I got home, one of them, had no internal parts for the bulb
to clip in, as if someone had removed the guts. On the other two, the
internals are there, but no wiring. That said, the cases are in excellent
condition as are the lenses. So, how do I fix them?
Question 1: How would I wire to the two that have all the internals, but no
wires?
Question 2: What are my options for the one without internals absent
purchasing another?
Question 3: Will I need the AEC9051 Series High Intensity LED Driver Kits
for each light?
In addition, I also purchased two LED landing lights from Whelen, and found
some nice mounts at the Parts Mart. Will I need the Driver kits for them as
well?
Thanks,
Jerry Folkerts
Message 2
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Position Light Questions |
Regarding number 3, my understanding of the PSA units is that they are read
y
for system voltage as-is. I just put them into the socket that my
incandescent bulbs came out of.
On Tue, Apr 5, 2011 at 5:19 PM, Jerald Folkerts <jfolkerts1@gmail.com>wrote
:
> At Sun-N-Fun, I purchased drop in replacement LED Bulbs for position ligh
ts
> from PSA Enterprises. No problem, I=92m committed to using them for my S
R2500
> Super Rebel day/night VFR objective. Next, I went to the Parts Mart and
> purchased what appeared to be three good Grimes position lights, the
> teardrop shape for the red and green, and a typical tail assembly. This
> year, many of the things were vacuum packed and you couldn=92t look at th
em
> closely. When I got home, one of them, had no internal parts for the bul
b
> to clip in, as if someone had removed the guts. On the other two, the
> internals are there, but no wiring. That said, the cases are in excellen
t
> condition as are the lenses. So, how do I fix them?
>
>
> Question 1: How would I wire to the two that have all the internals, but
> no wires?
>
>
> Question 2: What are my options for the one without internals absent
> purchasing another?
>
>
> Question 3: Will I need the AEC9051 Series High Intensity LED Driver Kit
s
> for each light?
>
>
> In addition, I also purchased two LED landing lights from Whelen, and fou
nd
> some nice mounts at the Parts Mart. Will I need the Driver kits for them
as
> well?
>
>
> Thanks,
> Jerry Folkerts
>
> * *
>
>
> *
>
===========
===========
===========
===========
> *
>
>
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|