Today's Message Index:
----------------------
1. 06:46 AM - Re: TurboCAD 10 (Jim Wickert)
2. 07:59 AM - Re: TurboCAD 10 (b d)
3. 08:10 AM - Re: TurboCAD 10 (Henador Titzoff)
4. 08:59 AM - Re: TurboCAD 15 (Jim Wickert)
5. 10:11 AM - Re: TurboCAD 10 (Richard Girard)
6. 10:43 AM - Re: AEC9009 Audio Iso Amp Wiring, especially Shielded Wires (Jared Yates)
7. 01:08 PM - Lightening up Z12 (rvg8tor)
8. 03:42 PM - Re: TurboCAD 10 (David)
9. 03:44 PM - Re: TurboCAD 15 (David)
10. 04:29 PM - Re: TurboCAD 15 (Terry Watson)
11. 05:57 PM - Re: Lightening up Z12 (Robert L. Nuckolls, III)
12. 06:27 PM - Re: TurboCAD 10 (Richard Girard)
13. 06:55 PM - Re: TurboCAD 10 (rayj)
14. 08:22 PM - Re: TurboCAD 10 (jerb)
15. 09:25 PM - E-Bus Diode Question (jvolkober)
Message 1
INDEX | Back to Main INDEX |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Go to this site they have TurboCad 15 which will run all XP, Vista, W7,
2D/3D ... $9.95 http://store.purplus.net/tu15de2d.html
Jim Wickert
Tel 920-467-0219
Cell 920-912-1014
From: owner-aeroelectric-list-server@matronics.com
[mailto:owner-aeroelectric-list-server@matronics.com] On Behalf Of Jerald
Folkerts
Sent: Tuesday, April 19, 2011 6:42 PM
Subject: RE: AeroElectric-List: TurboCAD 10
Rick,
I went to the same page, but purchased the Turbo Cad 15
version. Was only 12.95 including shipping and it's Windows 7 compatible.
I haven't done much with it yet, but it did install and I moved a few lines
around etc.
Jerry Folkerts
SR2500 #093
From: owner-aeroelectric-list-server@matronics.com
[mailto:owner-aeroelectric-list-server@matronics.com] On Behalf Of b d
Sent: Tuesday, April 19, 2011 5:01 PM
Subject: Re: AeroElectric-List: TurboCAD 10
Rick . . . are you running into that 32/64 bit delema thing? I don't know
but I know some 32 bit programs won't run on 64 . . .hence win 7 and Vista
maybe? I'm only guessing . . . shooting in the dark . . .aiming for Bill
Gates but still missing . . .how much was TC 10?
Bruce
On Tue, Apr 19, 2011 at 2:00 PM, Richard Girard <aslsa.rng@gmail.com> wrote:
Recently there was a post about cheap TC version 10. I ordered it and got it
yesterday. This version of the software won't run on anything later than
Windows XP. I've spent about two hours trying to find a compatibility mode
that will let it run on my Windows Vista Lap top to no avail. Anyone know of
a patch?
Rick Girard
--
Zulu Delta
Mk IIIC
Thanks, Homer GBYM
It isn't necessary to have relatives in Kansas City in order to be unhappy.
- Groucho Marx
ist" target="_blank">http://www.matronics.com/Navigator?AeroElectric-List
ttp://forums.matronics.com
_blank">http://www.matronics.com/contribution
http://www.matronics.com/Navigator?AeroElectric-List
http://forums.matronics.com
http://www.matronics.com/contribution
Message 2
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Thanks Jim . . . .Bruce
On Wed, Apr 20, 2011 at 6:33 AM, Jim Wickert <jimw_btg@earthlink.net> wrote
:
> Go to this site they have TurboCad 15 which will run all XP, Vista, W7,
> 2D/3D =85=85. $9.95 http://store.purplus.net/tu15de2d.html
>
>
> Jim Wickert
>
> Tel 920-467-0219
>
> Cell 920-912-1014
>
>
> *From:* owner-aeroelectric-list-server@matronics.com [mailto:
> owner-aeroelectric-list-server@matronics.com] *On Behalf Of *Jerald
> Folkerts
> *Sent:* Tuesday, April 19, 2011 6:42 PM
>
> *To:* aeroelectric-list@matronics.com
> *Subject:* RE: AeroElectric-List: TurboCAD 10
>
>
> Rick,
>
> I went to the same page, but purchased the Turbo Cad 15
> version. Was only 12.95 including shipping and it=92s Windows 7 compatib
le.
> I haven=92t done much with it yet, but it did install and I moved a few l
ines
> around etc.
>
> Jerry Folkerts
>
> SR2500 #093
>
>
> *From:* owner-aeroelectric-list-server@matronics.com [mailto:
> owner-aeroelectric-list-server@matronics.com] *On Behalf Of *b d
> *Sent:* Tuesday, April 19, 2011 5:01 PM
> *To:* aeroelectric-list@matronics.com
> *Subject:* Re: AeroElectric-List: TurboCAD 10
>
>
> Rick . . . are you running into that 32/64 bit delema thing? I don't kno
w
> but I know some 32 bit programs won't run on 64 . . .hence win 7 and Vist
a
> maybe? I'm only guessing . . . shooting in the dark . . .aiming for Bill
> Gates but still missing . . .how much was TC 10?
>
>
> Bruce
>
> On Tue, Apr 19, 2011 at 2:00 PM, Richard Girard <aslsa.rng@gmail.com>
> wrote:
>
> Recently there was a post about cheap TC version 10. I ordered it and got
> it yesterday. This version of the software won't run on anything later th
an
> Windows XP. I've spent about two hours trying to find a compatibility mod
e
> that will let it run on my Windows Vista Lap top to no avail. Anyone know
of
> a patch?
>
>
> Rick Girard
>
> --
>
> Zulu Delta
>
> Mk IIIC
>
> Thanks, Homer GBYM
>
>
> It isn't necessary to have relatives in Kansas City in order to be unhapp
y.
> - Groucho Marx
>
>
> * *
>
> * *
>
> *ist" target="_blank">http://www.matronics.com/Navigator?AeroElectric-L
ist*
>
> *ttp://forums.matronics.com*
>
> *_blank">http://www.matronics.com/contribution*
>
> * *
>
>
> * *
>
> * *
>
> * *
>
> *http://www.matronics.com/Navigator?AeroElectric-List*
>
> * *
>
> *http://forums.matronics.com*
>
> * *
>
> *http://www.matronics.com/contribution*
>
> * *
>
> * *
>
> * *
>
> * *
>
> **
>
> **
>
> **
>
> **
>
> **
>
> *http://www.matronics.com/Navigator?AeroElectric-List*
>
> **
>
> **
>
> *http://forums.matronics.com*
>
> **
>
> **
>
> **
>
> **
>
> *http://www.matronics.com/contribution*
>
> **
>
> * *
>
> *
>
===========
>
===========
===========
===========
>
> *
>
>
Message 3
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Jim,=0A=0ATurboCAD 15 costs 10 bucks, while AutoCAD 3D costs a boatload mor
e. =C2-What features, if any, does TurboCAD lack that AutoCAD 3D has? =C2
-The price sure does sound good, but $10 is hardly anything for software
these days.=0A=0AIf it turns out that TurboCAD 15 is not too neutered, then
it has to be the best bang for the buck we've run across in a long time!
=0A=C2-=0AHenador Titzoff=0A=0A=0A________________________________=0AFrom
: Jim Wickert <jimw_btg@earthlink.net>=0ATo: aeroelectric-list@matronics.co
m=0ASent: Wednesday, April 20, 2011 9:33 AM=0ASubject: Re: AeroElectric-Lis
t: TurboCAD 10=0A=0A=0AGo to this site they have TurboCad 15 which will run
all XP, Vista, W7, 2D/3D . $9.95=C2-=C2- http://stor
e.purplus.net/tu15de2d.html=0A=C2-=0AJim Wickert=0ATel 920-467-0219=0ACel
l 920-912-1014=0A=C2-=0AFrom:owner-aeroelectric-list-server@matronics.com
[mailto:owner-aeroelectric-list-server@matronics.com] On Behalf Of Jerald
Folkerts=0ASent: Tuesday, April 19, 2011 6:42 PM=0ATo: aeroelectric-list@ma
tronics.com=0ASubject: RE: AeroElectric-List: TurboCAD 10=0A=C2-=0ARick,
=0A=C2-=C2-=C2-=C2-=C2-=C2-=C2-=C2-=C2-=C2-=C2-=C2-
=C2-=C2-=C2- I went to the same page, but purchased the Turbo Cad 15
version.=C2- Was only 12.95 including shipping and it=99s Windows 7
compatible.=C2- I haven=99t done much with it yet, but it did inst
all and I moved a few lines around etc.=0AJerry Folkerts=0ASR2500 #093=0A
=C2-=0AFrom:owner-aeroelectric-list-server@matronics.com [mailto:owner-ae
roelectric-list-server@matronics.com] On Behalf Of b d=0ASent: Tuesday, Apr
il 19, 2011 5:01 PM=0ATo: aeroelectric-list@matronics.com=0ASubject: Re: Ae
roElectric-List: TurboCAD 10=0A=C2-=0ARick . . . are you running into tha
t 32/64 bit delema thing?=C2- I don't know but I know some 32 bit program
s won't run on 64 . . .hence win 7 and Vista maybe? I'm only guessing . . .
=C2-shooting in the dark . . .aiming for Bill Gates but still missing . .
.how much was TC 10?=C2-=C2-=0A=C2-=0ABruce=0AOn Tue, Apr 19, 2011 a
t 2:00 PM, Richard Girard <aslsa.rng@gmail.com> wrote:=0ARecently there was
a post about cheap TC version 10. I ordered it and got it yesterday. This
version of the software won't run on anything later than Windows XP. I've s
pent about two hours trying to find a compatibility mode that will let it r
un on my Windows Vista Lap top to no avail. Anyone know of a patch? =0A=C2
-=0ARick Girard=0A=0A-- =0AZulu Delta=0AMk IIIC=0AThanks, Homer GBYM=0A
=C2-=0AIt isn't necessary to have relatives in Kansas City in order to be
unhappy.=0A=C2- - Groucho Marx=0A=C2-=0A=C2-=0A=C2-=0A=C2-=0Aist
" target="_blank">http://www.matronics.com/Navigator?AeroElectric-List=0A
ttp://forums.matronics.com=0A_blank">http://www.matronics.com/contribution
=0A=C2-=0A=C2-=0A=C2-=0A=C2-=0A=C2-=0Ahttp://www.matronics.com/Na
vigator?AeroElectric-List=0A=C2-=0Ahttp://forums.matronics.com=0A=C2-
=0Ahttp://www.matronics.com/contribution=0A=C2-=0A=C2-=0A=C2-=0A=C2
-=0Ahttp://www.matronics.com/Navigator?AeroElectric-List=0Ahttp://forums.
=============
Message 4
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Henador
My Company. Business Technology Group is an Engineering Design
house that I owned for 31 years now, we have 10 Pro-E
seatsI can pound out some pretty quick designs with
TurboCad and not miss much in the basic 2D design and will stay head of
AutoCad pretty much all the time.TurboCad 15 also comes with a
PCB design set as well. For the cost of $9.95 I don=99t believe
you can=99t lose.
Take Care happy designing.
Jim Wickert
Tel 920-467-0219
Cell 920-912-1014
From: owner-aeroelectric-list-server@matronics.com
[mailto:owner-aeroelectric-list-server@matronics.com] On Behalf Of
Henador Titzoff
Sent: Wednesday, April 20, 2011 10:07 AM
Subject: Re: AeroElectric-List: TurboCAD 10
Jim,
TurboCAD 15 costs 10 bucks, while AutoCAD 3D costs a boatload more.
What features, if any, does TurboCAD lack that AutoCAD 3D has? The
price sure does sound good, but $10 is hardly anything for software
these days.
If it turns out that TurboCAD 15 is not too neutered, then it has to be
the best bang for the buck we've run across in a long time!
Henador Titzoff
_____
Message 5
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Thanks guys, I found a good price on the latest version (17) and ordered it
.
I use CAD a lot so the slight extra is worth it.
Rick Girard
On Wed, Apr 20, 2011 at 8:33 AM, Jim Wickert <jimw_btg@earthlink.net> wrote
:
> Go to this site they have TurboCad 15 which will run all XP, Vista, W7,
> 2D/3D =85=85. $9.95 http://store.purplus.net/tu15de2d.html
>
>
> Jim Wickert
>
> Tel 920-467-0219
>
> Cell 920-912-1014
>
>
> *From:* owner-aeroelectric-list-server@matronics.com [mailto:
> owner-aeroelectric-list-server@matronics.com] *On Behalf Of *Jerald
> Folkerts
> *Sent:* Tuesday, April 19, 2011 6:42 PM
> *To:* aeroelectric-list@matronics.com
> *Subject:* RE: AeroElectric-List: TurboCAD 10
>
>
> Rick,
>
> I went to the same page, but purchased the Turbo Cad 15
> version. Was only 12.95 including shipping and it=92s Windows 7 compatib
le.
> I haven=92t done much with it yet, but it did install and I moved a few l
ines
> around etc.
>
> Jerry Folkerts
>
> SR2500 #093
>
>
> *From:* owner-aeroelectric-list-server@matronics.com [mailto:
> owner-aeroelectric-list-server@matronics.com] *On Behalf Of *b d
> *Sent:* Tuesday, April 19, 2011 5:01 PM
> *To:* aeroelectric-list@matronics.com
> *Subject:* Re: AeroElectric-List: TurboCAD 10
>
>
> Rick . . . are you running into that 32/64 bit delema thing? I don't kno
w
> but I know some 32 bit programs won't run on 64 . . .hence win 7 and Vist
a
> maybe? I'm only guessing . . . shooting in the dark . . .aiming for Bill
> Gates but still missing . . .how much was TC 10?
>
>
> Bruce
>
> On Tue, Apr 19, 2011 at 2:00 PM, Richard Girard <aslsa.rng@gmail.com>
> wrote:
>
> Recently there was a post about cheap TC version 10. I ordered it and got
> it yesterday. This version of the software won't run on anything later th
an
> Windows XP. I've spent about two hours trying to find a compatibility mod
e
> that will let it run on my Windows Vista Lap top to no avail. Anyone know
of
> a patch?
>
>
> Rick Girard
>
> --
>
> Zulu Delta
>
> Mk IIIC
>
> Thanks, Homer GBYM
>
>
> It isn't necessary to have relatives in Kansas City in order to be unhapp
y.
> - Groucho Marx
>
>
> * *
>
> * *
>
> *ist" target="_blank">http://www.matronics.com/Navigator?AeroElectric-L
ist*
>
> *ttp://forums.matronics.com*
>
> *_blank">http://www.matronics.com/contribution*
>
> * *
>
>
> * *
>
> * *
>
> * *
>
> *http://www.matronics.com/Navigator?AeroElectric-List*
>
> * *
>
> *http://forums.matronics.com*
>
> * *
>
> *http://www.matronics.com/contribution*
>
> * *
>
> * *
>
> * *
>
> * *
>
> **
>
> **
>
> **
>
> **
>
> **
>
> *http://www.matronics.com/Navigator?AeroElectric-List*
>
> **
>
> **
>
> *http://forums.matronics.com*
>
> **
>
> **
>
> **
>
> **
>
> *http://www.matronics.com/contribution*
>
> **
>
> * *
>
> *
>
===========
===========
===========
===========
> *
>
>
--
Zulu Delta
Mk IIIC
Thanks, Homer GBYM
It isn't necessary to have relatives in Kansas City in order to be unhappy.
- Groucho Marx
Message 6
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: AEC9009 Audio Iso Amp Wiring, especially Shielded |
Wires
Does anyone know of any guidance about how to use shielded wires in audio
systems?
On Mon, Apr 18, 2011 at 2:09 PM, Jared Yates <email@jaredyates.com> wrote:
> AEC questions
>
> I'm wiring the AEC 9009 Audio Iso Amp and want to be sure that I'm doing it
> correctly. I don't understand entirely about how and when wires need to be
> shielded in this case. I have a single Nav/Com (GNS430), a Flightcom 403
> stereo intercom, a pilot position with a push-to-talk, a co-pilot position
> with a push-to-talk, and two back seat passengers. Inputs to the 9009 are
> the Dynon warning tones from the HS34, the 430 Nav audio, and a stereo ipod
> jack.
>
> Here's my wiring plan so far:
> 1. Connect the dynon HS34 tone output with a single-wire shielded cable at
> the 9009's pin 4(center conductor) and 10(sheild), leaving the Dynon's end
> of the shielded cable not connected to anything.
>
> 2. Use another single-wire shielded cable to connect the 430 Nav Audio Hi
> output to the 9009's pin 2(center conductor) and the Nav Audio Lo to the
> 9009 pin 11(shield). Is this correct, or do I need two conductors and a
> shield, with the shield wired as per 1 (connected at 9009, clipped at the
> other end)?
>
> 3. Connect a 3.5mm stereo jack to the 9009 with a 2-wire shielded cable:
> one conductor from the jack to 9009 pin 1, one conductor from the jack to
> 9009 pin 5, and the shield from the 3.5mm jack's ground to pin 12 on the
> 9009 (and the jack isolated from the airframe ground). Same question as
> number 2- Is this correct? Do I instead need to run a 3-wire shielded
> cable, with the third conductor connected to the jack's ground, and the
> shield wired as in number 1 above?
>
> 4. Run the left and right outputs of the 9009 (pins 7 and 6) to the
> flightcom's aux input channels. What about shields here? Should I run a
> single cable with two wires, or does each conductor need to be in its own
> shield?
>
> 5. Run the power to pin 8 on the 9009 with a 22AWG wire that is crimped in
> the same faston terminal as the intercom's power line so that they share a
> 1A fuse.
>
> 6. Wire the rest of the audio system (pilot, copilot, pax mic/phone jacks)
> per the flightcom directions, using 3-wire shielded cable with the jacks
> isolated from the airframe. What do I need to do with the shields?
>
> The Flightcom manual says that it has fail safe wiring that connects the
> pilot jacks to the radio if the intercom loses power, so I was planning to
> skip the fail-safe jacks described in the AEC9009 literature. Is there any
> other reason why I would want to include them? I can think of two cases
> where they would be useful. First, as described in the flightcom manual, if
> the intercom were to become inop and I removed it to send it away, I could
> still fly the airplane with a single functioning headset by using the
> directly wired jacks. If I omit the direct jacks, then this feature would
> not be available. Second, if the intercom failsafe system were to fail and
> the intercom were to both fail at the same time, I would be unable to use
> the 430's Com and would have to resort to the backup handheld and its
> headset adapter cord. Both of these circumstances seem pretty unlikely, and
> I think I'm willing to live without a solution for them. Are there any
> other good reasons to have the failsafe jacks that I might be forgetting
> about?
>
> My plan is to keep the 430 com functions out of the 9009 completely, since
> the intercom has channels for xmit and receive audio. This will keep the
> AEC out of the equation, and if it becomes inop then VHF communications will
> not be effected. Is there any reason why I shouldn't do it this way?
>
>
> *
>
> *
>
>
Message 7
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Lightening up Z12 |
I am going to ask this question a different way. In Z12 there are 2 alternators,
on plays a standby roll and will only produce power when the main alternator
goes out or is turned off. Given that only one alternator operates at a time
only one ammeter would be needed to monitor the electrical load coming from
the alternator providing the power.
This reduces parts count; takes out a shunt and switch required to look at two
shunts with on meter and or removes extra ammeter.
So does anyone see any flaws in this logic?
Cheers
--------
Mike "Nemo" Elliott
RV-8A QB (Fuselage)
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=337618#337618
Message 8
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Well, please tell us how much and where you found it!
David
Richard Girard wrote:
> Thanks guys, I found a good price on the latest version (17) and
> ordered it. I use CAD a lot so the slight extra is worth it.
>
> Rick Girard
>
> On Wed, Apr 20, 2011 at 8:33 AM, Jim Wickert <jimw_btg@earthlink.net
> <mailto:jimw_btg@earthlink.net>> wrote:
>
> Go to this site they have TurboCad 15 which will run all XP,
> Vista, W7, 2D/3D . $9.95 http://store.purplus.net/tu15de2d.html
>
> Jim Wickert
>
> Tel 920-467-0219 <tel:920-467-0219>
>
> Cell 920-912-1014 <tel:920-912-1014>
>
> *From:* owner-aeroelectric-list-server@matronics.com
> <mailto:owner-aeroelectric-list-server@matronics.com>
> [mailto:owner-aeroelectric-list-server@matronics.com
> <mailto:owner-aeroelectric-list-server@matronics.com>] *On Behalf
> Of *Jerald Folkerts
> *Sent:* Tuesday, April 19, 2011 6:42 PM
> *To:* aeroelectric-list@matronics.com
> <mailto:aeroelectric-list@matronics.com>
> *Subject:* RE: AeroElectric-List: TurboCAD 10
>
> Rick,
>
> I went to the same page, but purchased the Turbo
> Cad 15 version. Was only 12.95 including shipping and its
> Windows 7 compatible. I havent done much with it yet, but it did
> install and I moved a few lines around etc.
>
> Jerry Folkerts
>
> SR2500 #093
>
> *From:* owner-aeroelectric-list-server@matronics.com
> <mailto:owner-aeroelectric-list-server@matronics.com>
> [mailto:owner-aeroelectric-list-server@matronics.com
> <mailto:owner-aeroelectric-list-server@matronics.com>] *On Behalf
> Of *b d
> *Sent:* Tuesday, April 19, 2011 5:01 PM
> *To:* aeroelectric-list@matronics.com
> <mailto:aeroelectric-list@matronics.com>
> *Subject:* Re: AeroElectric-List: TurboCAD 10
>
> Rick . . . are you running into that 32/64 bit delema thing? I
> don't know but I know some 32 bit programs won't run on 64 . .
> .hence win 7 and Vista maybe? I'm only guessing . . . shooting in
> the dark . . .aiming for Bill Gates but still missing . . .how
> much was TC 10?
>
> Bruce
>
> On Tue, Apr 19, 2011 at 2:00 PM, Richard Girard
> <aslsa.rng@gmail.com <mailto:aslsa.rng@gmail.com>> wrote:
>
> Recently there was a post about cheap TC version 10. I ordered it
> and got it yesterday. This version of the software won't run on
> anything later than Windows XP. I've spent about two hours trying
> to find a compatibility mode that will let it run on my Windows
> Vista Lap top to no avail. Anyone know of a patch?
>
> Rick Girard
>
> --
>
> Zulu Delta
>
> Mk IIIC
>
> Thanks, Homer GBYM
>
> It isn't necessary to have relatives in Kansas City in order to be
> unhappy.
> - Groucho Marx
>
> * *
>
> * *
>
> *ist" target="_blank">http://www.matronics.com/Navigator?AeroElectric-List*
>
> *ttp://forums.matronics.com <http://forums.matronics.com>*
>
> *_blank">http://www.matronics.com/contribution*
>
> * *
>
> * *
>
> * *
>
> * *
>
> *http://www.matronics.com/Navigator?AeroElectric-List*
>
> * *
>
> *http://forums.matronics.com*
>
> * *
>
> *http://www.matronics.com/contribution*
>
> * *
>
> * *
>
> * *
>
> * *
>
> **
>
> **
>
> **
>
> **
>
> **
>
> *http://www.matronics.com/Navigator?AeroElectric-List*
>
> **
>
> **
>
> *http://forums.matronics.com*
>
> **
>
> **
>
> **
>
> **
>
> *http://www.matronics.com/contribution*
>
> **
>
> * *
>
> *
>
> ist" target="_blank">http://www.matronics.com/Navigator?AeroElectric-List
> tp://forums.matronics.com
> _blank">http://www.matronics.com/contribution
>
> *
>
>
> --
> Zulu Delta
> Mk IIIC
> Thanks, Homer GBYM
>
> It isn't necessary to have relatives in Kansas City in order to be
> unhappy.
> - Groucho Marx
>
>
> *
>
>
> *
--
If you're an American, just say NO to the Obamanation, to socialism, and get rid
of Soros.
Message 9
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Does it not handle 3d well?
David
Jim Wickert wrote:
>
> Henador
>
> My Company. Business Technology Group is an Engineering Design house
> that I owned for 31 years now, we have 10 Pro-E seatsI can pound out
> some pretty quick designs with TurboCad and not miss much in the basic
> 2D design and will stay head of AutoCad pretty much all the
> time.TurboCad 15 also comes with a PCB design set as well. For the
> cost of $9.95 I dont believe you cant lose.
>
> Take Care happy designing.
>
> Jim Wickert
>
> Tel 920-467-0219
>
> Cell 920-912-1014
>
> *From:* owner-aeroelectric-list-server@matronics.com
> [mailto:owner-aeroelectric-list-server@matronics.com] *On Behalf Of
> *Henador Titzoff
> *Sent:* Wednesday, April 20, 2011 10:07 AM
> *To:* aeroelectric-list@matronics.com
> *Subject:* Re: AeroElectric-List: TurboCAD 10
>
> Jim,
>
> TurboCAD 15 costs 10 bucks, while AutoCAD 3D costs a boatload more.
> What features, if any, does TurboCAD lack that AutoCAD 3D has? The
> price sure does sound good, but $10 is hardly anything for software
> these days.
>
> If it turns out that TurboCAD 15 is not too neutered, then it has to
> be the best bang for the buck we've run across in a long time!
>
> Henador Titzoff
>
> ------------------------------------------------------------------------
> *
>
>
> *
--
If you're an American, just say NO to the Obamanation, to socialism, and get rid
of Soros.
Message 10
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
The recent version of AutoCAD (2010) that I am been using handles 3D very well,
but it costs about $4,000. I have been using AutoCAD since about 1985 for architectural
(building) work, but I virtually never use the 3D functions because
I have other much cheaper software that does what I need to do in 3D much easier.
The current trend in CAD software seems to be towards specific applications.
There are version of CAD software for architectural design, civil engineering,
structural engineering, and of course mechanical and electrical engineering
applications. AutoCAD has a sister program called Revit for architecture with
versions for building structural and mechanical applications which is in a
class called BIM, or Building Information Modeling software. The difference from
CAD is that BIM software has an "awareness" of what it is drawing and creates
a building model by assembling materials and components.
My favorite for 3D work is Google Sketchup, which is available FREE from their
website. Just Google it and you can download it. I use a more expensive pro version,
but almost everything that I do in it could be done with the free version.
But I doubt very much if you would find Sketchup helpful for doing something
like a wiring diagram.
Terry
Seattle
-----Original Message-----
From: owner-aeroelectric-list-server@matronics.com [mailto:owner-aeroelectric-list-server@matronics.com] On Behalf Of David
Sent: Wednesday, April 20, 2011 3:27 PM
Subject: Re: AeroElectric-List: TurboCAD 15
Does it not handle 3d well?
David
Jim Wickert wrote:
>
> Henador
>
> My Company. Business Technology Group is an Engineering Design house
> that I owned for 31 years now, we have 10 Pro-E seatsI can pound out
> some pretty quick designs with TurboCad and not miss much in the basic
> 2D design and will stay head of AutoCad pretty much all the
> time.TurboCad 15 also comes with a PCB design set as well. For the
> cost of $9.95 I dont believe you cant lose.
>
> Take Care happy designing.
>
> Jim Wickert
>
> Tel 920-467-0219
>
> Cell 920-912-1014
>
> *From:* owner-aeroelectric-list-server@matronics.com
> [mailto:owner-aeroelectric-list-server@matronics.com] *On Behalf Of
> *Henador Titzoff
> *Sent:* Wednesday, April 20, 2011 10:07 AM
> *To:* aeroelectric-list@matronics.com
> *Subject:* Re: AeroElectric-List: TurboCAD 10
>
> Jim,
>
> TurboCAD 15 costs 10 bucks, while AutoCAD 3D costs a boatload more.
> What features, if any, does TurboCAD lack that AutoCAD 3D has? The
> price sure does sound good, but $10 is hardly anything for software
> these days.
>
> If it turns out that TurboCAD 15 is not too neutered, then it has to
> be the best bang for the buck we've run across in a long time!
>
> Henador Titzoff
>
> ------------------------------------------------------------------------
> *
>
>
> *
--
If you're an American, just say NO to the Obamanation, to socialism, and get rid
of Soros.
Message 11
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Lightening up Z12 |
At 03:59 PM 4/20/2011, you wrote:
>
>I am going to ask this question a different way. In Z12 there are 2
>alternators, on plays a standby roll and will only produce power
>when the main alternator goes out or is turned off. Given that only
>one alternator operates at a time only one ammeter would be needed
>to monitor the electrical load coming from the alternator providing
>the power.
>
>This reduces parts count; takes out a shunt and switch required to
>look at two shunts with on meter and or removes extra ammeter.
>
>So does anyone see any flaws in this logic?
That will work
Bob . . .
Message 12
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
David, Version 17 was $60 with tax and shipping from Micro Center Online.
Rick
On Wed, Apr 20, 2011 at 5:22 PM, David <ainut@knology.net> wrote:
>
> Well, please tell us how much and where you found it!
>
> David
>
>
> Richard Girard wrote:
>
>> Thanks guys, I found a good price on the latest version (17) and ordered
>> it. I use CAD a lot so the slight extra is worth it.
>>
>> Rick Girard
>>
>> On Wed, Apr 20, 2011 at 8:33 AM, Jim Wickert <jimw_btg@earthlink.net<mai
lto:
>> jimw_btg@earthlink.net>> wrote:
>>
>> Go to this site they have TurboCad 15 which will run all XP,
>> Vista, W7, 2D/3D =85=85. $9.95 http://store.purplus.net/tu15de2d.html
>>
>> Jim Wickert
>>
>> Tel 920-467-0219 <tel:920-467-0219>
>>
>> Cell 920-912-1014 <tel:920-912-1014>
>>
>> *From:* owner-aeroelectric-list-server@matronics.com
>> <mailto:owner-aeroelectric-list-server@matronics.com>
>> [mailto:owner-aeroelectric-list-server@matronics.com
>> <mailto:owner-aeroelectric-list-server@matronics.com>] *On Behalf
>> Of *Jerald Folkerts
>> *Sent:* Tuesday, April 19, 2011 6:42 PM
>> *To:* aeroelectric-list@matronics.com
>> <mailto:aeroelectric-list@matronics.com>
>> *Subject:* RE: AeroElectric-List: TurboCAD 10
>>
>> Rick,
>>
>> I went to the same page, but purchased the Turbo
>> Cad 15 version. Was only 12.95 including shipping and it=92s
>> Windows 7 compatible. I haven=92t done much with it yet, but it did
>> install and I moved a few lines around etc.
>>
>> Jerry Folkerts
>>
>> SR2500 #093
>>
>> *From:* owner-aeroelectric-list-server@matronics.com
>> <mailto:owner-aeroelectric-list-server@matronics.com>
>> [mailto:owner-aeroelectric-list-server@matronics.com
>> <mailto:owner-aeroelectric-list-server@matronics.com>] *On Behalf
>> Of *b d
>> *Sent:* Tuesday, April 19, 2011 5:01 PM
>> *To:* aeroelectric-list@matronics.com
>> <mailto:aeroelectric-list@matronics.com>
>> *Subject:* Re: AeroElectric-List: TurboCAD 10
>>
>> Rick . . . are you running into that 32/64 bit delema thing? I
>> don't know but I know some 32 bit programs won't run on 64 . .
>> .hence win 7 and Vista maybe? I'm only guessing . . . shooting in
>> the dark . . .aiming for Bill Gates but still missing . . .how
>> much was TC 10?
>>
>> Bruce
>>
>> On Tue, Apr 19, 2011 at 2:00 PM, Richard Girard
>> <aslsa.rng@gmail.com <mailto:aslsa.rng@gmail.com>> wrote:
>>
>> Recently there was a post about cheap TC version 10. I ordered it
>> and got it yesterday. This version of the software won't run on
>> anything later than Windows XP. I've spent about two hours trying
>> to find a compatibility mode that will let it run on my Windows
>> Vista Lap top to no avail. Anyone know of a patch?
>>
>> Rick Girard
>>
>> --
>> Zulu Delta
>>
>> Mk IIIC
>>
>> Thanks, Homer GBYM
>>
>> It isn't necessary to have relatives in Kansas City in order to be
>> unhappy.
>> - Groucho Marx
>>
>> * *
>>
>> * *
>>
>> *ist" target="_blank">
>> http://www.matronics.com/Navigator?AeroElectric-List*
>>
>> *ttp://forums.matronics.com <http://forums.matronics.com>*
>>
>> *_blank">http://www.matronics.com/contribution*
>>
>> * *
>>
>> * *
>>
>> * *
>>
>> * *
>>
>> *http://www.matronics.com/Navigator?AeroElectric-List*
>>
>> * *
>>
>> *http://forums.matronics.com*
>>
>> * *
>>
>> *http://www.matronics.com/contribution*
>>
>> * *
>>
>> * *
>>
>> * *
>>
>> * *
>>
>> **
>>
>> **
>>
>> **
>>
>> **
>>
>> **
>>
>> *http://www.matronics.com/Navigator?AeroElectric-List*
>>
>> **
>>
>> **
>>
>> *http://forums.matronics.com*
>>
>> **
>>
>> **
>>
>> **
>>
>> **
>>
>> *http://www.matronics.com/contribution*
>>
>> **
>>
>> * *
>>
>> *
>>
>> ist" target="_blank">
>> http://www.matronics.com/Navigator?AeroElectric-List
>> tp://forums.matronics.com
>> _blank">http://www.matronics.com/contribution
>>
>> *
>>
>>
>>
>>
>> --
>> Zulu Delta
>> Mk IIIC
>> Thanks, Homer GBYM
>>
>> It isn't necessary to have relatives in Kansas City in order to be
>> unhappy.
>> - Groucho Marx
>>
>>
>> *
>>
>>
>> *
>>
>
> --
> If you're an American, just say NO to the Obamanation, to socialism, and
> get rid of Soros.
>
>
===========
===========
===========
===========
>
>
--
Zulu Delta
Mk IIIC
Thanks, Homer GBYM
It isn't necessary to have relatives in Kansas City in order to be unhappy.
- Groucho Marx
Message 13
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
I'm a little off topic here but since you were talking CAD I thought I
ask if anyone knows of a cheap solid modeling cad program. I would
prefer to run it on Linux but will run it on Windows if I have to.
I've been playing with BRL CAD but I'm hoping to find something easier
to learn quickly.
Thanks for any help.
do not archive
Raymond Julian
Kettle River, MN
"And you know that I could have me a million more friends,
and all I'd have to lose is my point of view." - John Prine
On 04/20/2011 08:22 PM, Richard Girard wrote:
> David, Version 17 was $60 with tax and shipping from Micro Center Online.
>
> Rick
>
> On Wed, Apr 20, 2011 at 5:22 PM, David <ainut@knology.net
> <mailto:ainut@knology.net>> wrote:
>
> <mailto:ainut@knology.net>>
>
> Well, please tell us how much and where you found it!
>
> David
>
>
> Richard Girard wrote:
>
> Thanks guys, I found a good price on the latest version (17) and
> ordered it. I use CAD a lot so the slight extra is worth it.
>
> Rick Girard
>
> On Wed, Apr 20, 2011 at 8:33 AM, Jim Wickert
> <jimw_btg@earthlink.net <mailto:jimw_btg@earthlink.net>
> <mailto:jimw_btg@earthlink.net <mailto:jimw_btg@earthlink.net>>>
> wrote:
>
> Go to this site they have TurboCad 15 which will run all XP,
> Vista, W7, 2D/3D . $9.95
> http://store.purplus.net/tu15de2d.html
>
> Jim Wickert
>
> Tel 920-467-0219 <tel:920-467-0219> <tel:920-467-0219
> <tel:920-467-0219>>
>
> Cell 920-912-1014 <tel:920-912-1014> <tel:920-912-1014
> <tel:920-912-1014>>
>
> *From:* owner-aeroelectric-list-server@matronics.com
> <mailto:owner-aeroelectric-list-server@matronics.com>
> <mailto:owner-aeroelectric-list-server@matronics.com
> <mailto:owner-aeroelectric-list-server@matronics.com>>
> [mailto:owner-aeroelectric-list-server@matronics.com
> <mailto:owner-aeroelectric-list-server@matronics.com>
> <mailto:owner-aeroelectric-list-server@matronics.com
> <mailto:owner-aeroelectric-list-server@matronics.com>>] *On Behalf
> Of *Jerald Folkerts
> *Sent:* Tuesday, April 19, 2011 6:42 PM
> *To:* aeroelectric-list@matronics.com
> <mailto:aeroelectric-list@matronics.com>
> <mailto:aeroelectric-list@matronics.com
> <mailto:aeroelectric-list@matronics.com>>
> *Subject:* RE: AeroElectric-List: TurboCAD 10
>
> Rick,
>
> I went to the same page, but purchased the Turbo
> Cad 15 version. Was only 12.95 including shipping and its
> Windows 7 compatible. I havent done much with it yet, but
> it did
> install and I moved a few lines around etc.
>
> Jerry Folkerts
>
> SR2500 #093
>
> *From:* owner-aeroelectric-list-server@matronics.com
> <mailto:owner-aeroelectric-list-server@matronics.com>
> <mailto:owner-aeroelectric-list-server@matronics.com
> <mailto:owner-aeroelectric-list-server@matronics.com>>
> [mailto:owner-aeroelectric-list-server@matronics.com
> <mailto:owner-aeroelectric-list-server@matronics.com>
> <mailto:owner-aeroelectric-list-server@matronics.com
> <mailto:owner-aeroelectric-list-server@matronics.com>>] *On Behalf
> Of *b d
> *Sent:* Tuesday, April 19, 2011 5:01 PM
> *To:* aeroelectric-list@matronics.com
> <mailto:aeroelectric-list@matronics.com>
> <mailto:aeroelectric-list@matronics.com
> <mailto:aeroelectric-list@matronics.com>>
> *Subject:* Re: AeroElectric-List: TurboCAD 10
>
> Rick . . . are you running into that 32/64 bit delema thing? I
> don't know but I know some 32 bit programs won't run on 64 . .
> .hence win 7 and Vista maybe? I'm only guessing . . .
> shooting in
> the dark . . .aiming for Bill Gates but still missing . . .how
> much was TC 10?
>
> Bruce
>
> On Tue, Apr 19, 2011 at 2:00 PM, Richard Girard
> <aslsa.rng@gmail.com <mailto:aslsa.rng@gmail.com>
> <mailto:aslsa.rng@gmail.com <mailto:aslsa.rng@gmail.com>>> wrote:
>
> Recently there was a post about cheap TC version 10. I
> ordered it
> and got it yesterday. This version of the software won't run on
> anything later than Windows XP. I've spent about two hours
> trying
> to find a compatibility mode that will let it run on my Windows
> Vista Lap top to no avail. Anyone know of a patch?
>
> Rick Girard
>
> --
> Zulu Delta
>
> Mk IIIC
>
> Thanks, Homer GBYM
>
> It isn't necessary to have relatives in Kansas City in order
> to be
> unhappy.
> - Groucho Marx
>
> * *
>
> * *
>
> *ist"
> target="_blank">http://www.matronics.com/Navigator?AeroElectric-List*
>
> *ttp://forums.matronics.com <http://forums.matronics.com>
> <http://forums.matronics.com>*
>
> *_blank">http://www.matronics.com/contribution*
>
> * *
>
> * *
>
> * *
>
> * *
>
> *http://www.matronics.com/Navigator?AeroElectric-List*
>
> * *
>
> *http://forums.matronics.com*
>
> * *
>
> *http://www.matronics.com/contribution*
>
> * *
>
> * *
>
> * *
>
> * *
>
> **
>
> **
>
> **
>
> **
>
> **
>
> *http://www.matronics.com/Navigator?AeroElectric-List*
>
> **
>
> **
>
> *http://forums.matronics.com*
>
> **
>
> **
>
> **
>
> **
>
> *http://www.matronics.com/contribution*
>
> **
>
> * *
>
> *
>
> ist"
> target="_blank">http://www.matronics.com/Navigator?AeroElectric-List
> tp://forums.matronics.com <http://forums.matronics.com>
> _blank">http://www.matronics.com/contribution
>
> *
>
>
> --
> Zulu Delta
> Mk IIIC
> Thanks, Homer GBYM
>
> It isn't necessary to have relatives in Kansas City in order to
> be unhappy.
> - Groucho Marx
>
>
> *
>
>
> *
>
>
> --
> If you're an American, just say NO to the Obamanation, to socialism,
> and get rid of Soros.
>
>
> ==========
> -List"
> target="_blank">http://www.matronics.com/Navigator?AeroElectric-List
> ==========
> http://forums.matronics.com
> ==========
> le, List Admin.
> ="_blank">http://www.matronics.com/contribution
> ==========
>
>
> --
> Zulu Delta
> Mk IIIC
> Thanks, Homer GBYM
>
> It isn't necessary to have relatives in Kansas City in order to be unhappy.
> - Groucho Marx
>
>
> *
>
>
> *
Message 14
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Been going to get me a cheap cad package, this
topic pushed the button. Been reading about a
few referenced in a couple different issues in Kit Planes.
Went to the site of the link of the message below
- snagged me a copy of the TurboCad 15 - its 2D3D
for 9.95. They do have TurboCad 17, available in
3 different levels starting at 39.95 up to
989.99. I'm not a big cad user so I figured the
TurboCad 15 would do all I need. The description
for the release 17 packages mention it has
professional-level drafting tools, not sure if
these are included in release 15. Also picked up
a couple FloorPlan /Architect packages. By the
way PurPlus takes PayPal and it appears any order
over $20 has free shipping, just how long it takes to get to ya.
jerb
At 10:06 AM 4/20/2011, you wrote:
>Thanks guys, I found a good price on the latest
>version (17) and ordered it. I use CAD a lot so the slight extra is worth
it.
>
>Rick Girard
>
>On Wed, Apr 20, 2011 at 8:33 AM, Jim Wickert
><<mailto:jimw_btg@earthlink.net>jimw_btg@earthlink.net> wrote:
>
>Go to this site they have TurboCad 15 which will
>run all XP, Vista, W7, 2D/3D =85=85.
>$9.95
><http://store.purplus.net/tu15de2d.html>http://store.purplus.net/tu15de2d.h
tml
>
>
>Jim Wickert
>snip....
Message 15
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | E-Bus Diode Question |
I have a .8 volt drop across my e-bus diode. Voltage in from the main bus is 12.4.
Voltage out to the e-bus is 11.6. Can anyone advise if this is normal or
if I have problem. Wiring appears correct. Checked it against the diagram
on B&C.
John
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=337671#337671
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|