Today's Message Index:
----------------------
1. 07:45 AM - Re: Report on New Power Supply (David L.)
Message 1
INDEX | Back to Main INDEX |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Report on New Power Supply |
Bob,
...I am on an extended trip with limited email, etc.
No, I have not run further tests nor tried anything to find the reason
for poor regulation on the power supply.
....more later, David
______________________________________________________
On Sat, Sep 24, 2011 at 6:51 PM, Robert L. Nuckolls, III wrote:
At 06:49 PM 9/14/2011, you wrote:
Hi Bob,
Several months ago I too purchased one of these units (or similar) as it
seemed like a great method to power up the panel when working on the
electrical problems, changes, etc. Rated at 13.5 v., 350W, the first
unit I received (they come from China) would not hold voltage when
loaded with about 5-6 amps of panel load. It started at about 13.4 v.
and dropped to 12.4 when the panel was powered up. <snip>
Dave, did you run the reasons for your observations
to ground?
Bob . . .
<http://www.matronics.com/contribution>
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|