---------------------------------------------------------- AeroElectric-List Digest Archive --- Total Messages Posted Sun 07/29/12: 10 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 12:55 AM - Re: Modifying 12V LED Strip Lighting to work in 24/28V Aircraft (dfritzj) 2. 04:43 AM - gps (bob noffs) 3. 07:28 AM - Re: gps (jan) 4. 07:52 AM - Re: gps (bob noffs) 5. 08:36 AM - Re: Modifying 12V LED Strip Lighting to work in 24/28V Aircraft (Bill) 6. 09:26 AM - Re: Z-13/8 in a Long-EZ (jdubner) 7. 11:37 AM - Re: Modifying 12V LED Strip Lighting to work in 24/28V Aircraft (Jeff Luckey) 8. 12:48 PM - Re: Modifying 12V LED Strip Lighting to work in 24/28V Aircraft (Henador Titzoff) 9. 01:18 PM - Re: Modifying 12V LED Strip Lighting to work in 24/28V Aircraft (Jeff Luckey) 10. 02:33 PM - Re: Modifying 12V LED Strip Lighting to work in 24/28V Aircraft (rayj) ________________________________ Message 1 _____________________________________ Time: 12:55:32 AM PST US Subject: AeroElectric-List: Re: Modifying 12V LED Strip Lighting to work in 24/28V Aircraft From: dfritzj This raises a good question: is it okay to light a strip of LEDs by just wiring them in series in a quantity such that each LED sees the appropriate voltage drop? This would seem to eliminate the (admittedly small) energy loss from heating up resistors. On the other hand, failure of one LED would darken the whole string. Thoughts? Dan ________________________________ Message 2 _____________________________________ Time: 04:43:18 AM PST US Subject: AeroElectric-List: gps From: bob noffs hi all, last week i started looking around for a garmin pilot 3 as a backup. plenty of street pilots available. can an aviation database be downloaded to the street pilot? thanks, bob noffs ________________________________ Message 3 _____________________________________ Time: 07:28:09 AM PST US From: jan Subject: RE: AeroElectric-List: gps My understanding is that you can NOT do that .. you need the aircraft version. Did you try on the VAF web site ? You can post a "want to buy" ... Jan _____ From: owner-aeroelectric-list-server@matronics.com [mailto:owner-aeroelectric-list-server@matronics.com] On Behalf Of bob noffs Sent: 29 July 2012 12:41 Subject: AeroElectric-List: gps hi all, last week i started looking around for a garmin pilot 3 as a backup. plenty of street pilots available. can an aviation database be downloaded to the street pilot? thanks, bob noffs

My understanding is that you can NOT do that .. you need the aircraft version.

Did you try on the VAF web site ? You can post a “want to buy” …

Jan

From: owner-aeroelectric-list-server@matronics.com [mailto:owner-aeroelectric-list-server@matronics.com] On Behalf Of bob noffs
Sent: 29 July 2012 12:41
To: aeroelectric list
Subject: AeroElectric-List: gps

hi all, last week i started looking around for a garmin pilot 3 as a backup. plenty of street pilots available. can an aviation database be downloaded to the street pilot?

thanks, bob noffs

http://www
.matronics.com/Navigator?AeroElectric-List

http://forums.matronics.com

http://www.matronics.com/
contribution

________________________________ Message 4 _____________________________________ Time: 07:52:38 AM PST US Subject: Re: AeroElectric-List: gps From: bob noffs jan, i went to the site and how to it didn't just jump out and bite me so i gave it up. i guess i will try that again. bob noffs On Sun, Jul 29, 2012 at 9:34 AM, jan wrote: > My understanding is that you can NOT do that .. you need the aircraft > version.**** > > ** ** > > Did you try on the VAF web site ? You can post a =93want to buy=94 =85** ** > > ** ** > > Jan**** > > ** ** > ------------------------------ > > *From:* owner-aeroelectric-list-server@matronics.com [mailto: > owner-aeroelectric-list-server@matronics.com] *On Behalf Of *bob noffs > *Sent:* 29 July 2012 12:41 > *To:* aeroelectric list > *Subject:* AeroElectric-List: gps**** > > ** ** > > hi all, last week i started looking around for a garmin pilot 3 as a > backup. plenty of street pilots available. can an aviation database be > downloaded to the street pilot?**** > > thanks, bob noffs**** > > * * > > * * > > ** > > ** > > ** > > ** > > ** > > ** > > ** > > *http://www.matronics.com/Navigator?AeroElectric-List* > > ** > > ** > > ** > > ** > > ** > > *http://forums.matronics.com* > > ** > > ** > > ** > > ** > > ** > > *http://www.matronics.com/contribution* > > ** > > * * > > * > =========== =========== =========== =========== > * > > ________________________________ Message 5 _____________________________________ Time: 08:36:26 AM PST US Subject: Re: AeroElectric-List: Modifying 12V LED Strip Lighting to work in 24/28V Aircraft From: Bill On Sat, Jul 28, 2012 at 11:35 PM, you wrote ---------------snip-------------- > One thing to remember is that the number of LED's in each of the strips must be the same -----------snip----------- Not to worry, Eric noted this on his pdf below. Bill SF bay area > > Attachments: > > > > > http://forums.matronics.com//files/modify_led_strip_lighting_for_24_28_volts_196.pdf > > ________________________________ Message 6 _____________________________________ Time: 09:26:03 AM PST US Subject: AeroElectric-List: Re: Z-13/8 in a Long-EZ From: "jdubner" Jeff, I also fly an Long-EZ, also with an automotive alternator and ATC fuses. I mounted two fuse blocks back-to-back to a bulkhead and just above the nosewheel cover. Attached is a picture of the battery-bus side of the fuseblocks. (Note: some of the fuses visible are just spares.) The fuses are accessible through the nose access hatch. My alternator is an internally-regulated Hitachi (from a 1979 Datsun pickup) and suffers no ill effects when I disconnect it from the bus with a contactor. $50 at rockauto.com! Email me if I can help you with any electrical or wiring issues. -- Joe Independence, OR www.mail2600.com/cgi-bin/webcam.cgi Read this topic online here: http://forums.matronics.com/viewtopic.php?p=379495#379495 Attachments: http://forums.matronics.com//files/battery_bus_fuse_block_971.jpg ________________________________ Message 7 _____________________________________ Time: 11:37:58 AM PST US From: "Jeff Luckey" Subject: RE: AeroElectric-List: Modifying 12V LED Strip Lighting to work in 24/28V Aircraft Are the LEDs shown in that PDF drawn w/ the correct polarity?? _____ From: owner-aeroelectric-list-server@matronics.com [mailto:owner-aeroelectric-list-server@matronics.com] On Behalf Of Bill Sent: Sunday, July 29, 2012 08:35 Subject: Re: AeroElectric-List: Modifying 12V LED Strip Lighting to work in 24/28V Aircraft On Sat, Jul 28, 2012 at 11:35 PM, you wrote ---------------snip-------------- > One thing to remember is that the number of LED's in each of the strips must be the same -----------snip----------- Not to worry, Eric noted this on his pdf below. Bill SF bay area > Attachments: > > http://forums.matronics.com//files/modify_led_strip_lighting_for_24_28_volts _196.pdf > No virus found in this message. Checked by AVG - www.avg.com ________________________________ Message 8 _____________________________________ Time: 12:48:46 PM PST US From: Henador Titzoff Subject: RE: AeroElectric-List: Modifying 12V LED Strip Lighting to work in 24/28V Aircraft Good catch, Jeff. -I guess you were Luckey, huh? -Good job! Henador Titzoff --- On Sun, 7/29/12, Jeff Luckey wrote: From: Jeff Luckey Subject: RE: AeroElectric-List: Modifying 12V LED Strip Lighting to work in 24/28V Aircraft =0A=0A=0A =0A =0A=0A =0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0AAre the LEDs shown in that PDF drawn w/=0Athe correct polarity?? =0A=0A - =0A=0A=0A=0A=0A =0A=0A=0A=0A=0AFrom:=0Aowner-aeroelectric-list-server@matronics.com=0A[mail to:owner-aeroelectric-list-server@matronics.com] On Behalf Of Bill =0ASent: Sunday, July 29, 2012 08:35 =0ATo: aeroelectric-list@matronics.com =0ASubject: Re: AeroElectric-List:=0AModifying 12V LED Strip Lighting to wo rk in 24/28V Aircraft =0A=0A=0A=0A - =0A=0A - =0A=0A=0A=0AOn Sat, Jul 2 8, 2012 at 11:35 PM, you wrote =0A=0A=0A=0A - =0A=0A=0A=0A=0A=0A--------- ------snip--------------- =0A=0A=0A=0A=0A=0A> One thing to remember is th at the number of LED's in each of the=0Astrips must be the same =0A=0A=0A =0A=0A=0A-----------snip------------ =0A=0A=0A=0A=0A=0A - =0A=0A=0A=0A =0A=0ANot to worry, Eric noted this on his pdf below. =0A=0A=0A=0A=0A=0A - =0A=0A=0A=0A=0A=0ABill =0A=0A=0A=0A=0A=0ASF bay area =0A=0A=0A=0A=0A=0A - =0A=0A=0A=0A=0A=0A> Attachments: =0A> =0A> http://forums.matronics.com//files/modify_led_strip_lighting_for_24_28 _volts_196.pdf =0A> =0A=0A=0A=0A=0A=0A - -http://www.matronics.com/Navigator?AeroElect ric-Listhttp://forums.matronics.comhttp://www.matronics.com/contribution - =0A=0A=0A=0ANo virus found in this message. =0AChecked by AVG - www.avg.com =====0A=0A ________________________________ Message 9 _____________________________________ Time: 01:18:49 PM PST US From: "Jeff Luckey" Subject: RE: AeroElectric-List: Modifying 12V LED Strip Lighting to work in 24/28V Aircraft What's that old saying? It's better to be good than lucky. However, in my case, I'm always Luckey ;) _____ From: owner-aeroelectric-list-server@matronics.com [mailto:owner-aeroelectric-list-server@matronics.com] On Behalf Of Henador Titzoff Sent: Sunday, July 29, 2012 12:47 Subject: RE: AeroElectric-List: Modifying 12V LED Strip Lighting to work in 24/28V Aircraft Good catch, Jeff. I guess you were Luckey, huh? Good job! Henador Titzoff --- On Sun, 7/29/12, Jeff Luckey wrote: From: Jeff Luckey Subject: RE: AeroElectric-List: Modifying 12V LED Strip Lighting to work in 24/28V Aircraft Are the LEDs shown in that PDF drawn w/ the correct polarity?? _____ From: owner-aeroelectric-list-server@matronics.com [mailto:owner-aeroelectric-list-server@matronics.com] On Behalf Of Bill Sent: Sunday, July 29, 2012 08:35 Subject: Re: AeroElectric-List: Modifying 12V LED Strip Lighting to work in 24/28V Aircraft On Sat, Jul 28, 2012 at 11:35 PM, you wrote ---------------snip-------------- > One thing to remember is that the number of LED's in each of the strips must be the same -----------snip----------- Not to worry, Eric noted this on his pdf below. Bill SF bay area > Attachments: > > http://forums.matronics.com//files/modify_led_strip_lighting_for_24_28_volts _196.pdf > http://www.matronics.com/Navigator?AeroElectric-List http://forums.matronics.com http://www.matronics.com/contribution No virus found in this message. Checked by AVG - www.avg.com 07/28/12 ________________________________ Message 10 ____________________________________ Time: 02:33:51 PM PST US From: rayj Subject: Re: AeroElectric-List: Modifying 12V LED Strip Lighting to work in 24/28V Aircraft I always heard: It's good to be good, but it's better to be lucky" (or Luckey in your case). do not archive Raymond Julian Kettle River, MN. "And you know that I could have me a million more friends, and all I'd have to lose is my point of view." - John Prine On 07/29/2012 03:17 PM, Jeff Luckey wrote: > Whats that old saying? Its better to be good than lucky. However, in > my case, Im always Luckey ;) > > ------------------------------------------------------------------------ > > *From:*owner-aeroelectric-list-server@matronics.com > [mailto:owner-aeroelectric-list-server@matronics.com] *On Behalf Of > *Henador Titzoff > *Sent:* Sunday, July 29, 2012 12:47 > *To:* aeroelectric-list@matronics.com > *Subject:* RE: AeroElectric-List: Modifying 12V LED Strip Lighting to > work in 24/28V Aircraft > > Good catch, Jeff. I guess you were Luckey, huh? Good job! > > Henador Titzoff > > > --- On *Sun, 7/29/12, Jeff Luckey //* wrote: > > > From: Jeff Luckey > Subject: RE: AeroElectric-List: Modifying 12V LED Strip Lighting to work > in 24/28V Aircraft > To: aeroelectric-list@matronics.com > Date: Sunday, July 29, 2012, 11:36 AM > > Are the LEDs shown in that PDF drawn w/ the correct polarity?? > > ------------------------------------------------------------------------ > > *From:*owner-aeroelectric-list-server@matronics.com > [mailto:owner-aeroelectric-list-server@matronics.com] *On Behalf Of *Bill > *Sent:* Sunday, July 29, 2012 08:35 > *To:* aeroelectric-list@matronics.com > *Subject:* Re: AeroElectric-List: Modifying 12V LED Strip Lighting to > work in 24/28V Aircraft > > On Sat, Jul 28, 2012 at 11:35 PM, you wrote > > ---------------snip-------------- > >> One thing to remember is that the number of LED's in each of the strips must be the same > > -----------snip----------- > > Not to worry, Eric noted this on his pdf below. > > Bill > > SF bay area > > > Attachments: > > > > > http://forums.matronics.com//files/modify_led_strip_lighting_for_24_28_volts_196.pdf > > > > > * * > > * * > > *http://www.matronics.com/Navigator?AeroElectric-List* > > *http://forums.matronics.com* > > *http://www.matronics.com/contribution* > > * * > > No virus found in this message. > Checked by AVG - www.avg.com > 07/28/12 > > * > > > * > ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message aeroelectric-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/AeroElectric-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/aeroelectric-list Browse Digests http://www.matronics.com/digest/aeroelectric-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.