---------------------------------------------------------- AeroElectric-List Digest Archive --- Total Messages Posted Wed 11/07/12: 8 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 12:20 PM - Re: A200/Flightcom 403 radio not transmitting- plane grounded!! (SIDESLIP) 2. 12:42 PM - Re: Re: A200/Flightcom 403 radio not transmitting- plane grounded!! (Ken) 3. 01:43 PM - Re: Re: A200/Flightcom 403 radio not transmitting- plane grounded!! (Henry Hallam) 4. 03:51 PM - Re: AeroElectric-List Digest: 29 Msgs - 11/05/12 (Allan Chong) 5. 05:17 PM - Beautiful Jade Pendants Online! (dshfjhj) 6. 06:22 PM - for Bob (RGent1224@aol.com) 7. 09:40 PM - Re: for Bob (Robert L. Nuckolls, III) 8. 09:52 PM - Re: for Bob (dstevenco@comcast.net) ________________________________ Message 1 _____________________________________ Time: 12:20:21 PM PST US Subject: AeroElectric-List: Re: A200/Flightcom 403 radio not transmitting- plane grounded!! From: "SIDESLIP" Well...... Radio seems fine. Only thing that was out of whack was the sidetone. Apparently it was set really high. Not sure if that has any effect or not. Getting radio back on Friday.... So, we will see. Guess its time to move on to other possibilities..... :-/ Chad -------- C-GYXQ. 912ULS. 601XL-B Read this topic online here: http://forums.matronics.com/viewtopic.php?p=387173#387173 ________________________________ Message 2 _____________________________________ Time: 12:42:31 PM PST US From: Ken Subject: Re: AeroElectric-List: Re: A200/Flightcom 403 radio not transmitting- plane grounded!! Yes it might. Factory settings of sidetone and mic gain were too high for my headset causing distortion. Believe I also had to increase squelch. Has worked well after that for several years now. Ken On 07/11/2012 3:18 PM, SIDESLIP wrote: > --> AeroElectric-List message posted by: > "SIDESLIP" > > Well...... Radio seems fine. Only thing that was out of whack was the > sidetone. Apparently it was set really high. Not sure if that has any > effect or not. > > Getting radio back on Friday.... So, we will see. Guess its time to > move on to other possibilities..... :-/ > > Chad > > -------- C-GYXQ. 912ULS. 601XL-B > > ________________________________ Message 3 _____________________________________ Time: 01:43:57 PM PST US From: Henry Hallam Subject: Re: AeroElectric-List: Re: A200/Flightcom 403 radio not transmitting- plane grounded!! I had some squealing issues with my DIY intercom and Garmin 480 that were resolved by turning the sidetone on the 480 all the way to 0. (The intercom provides sidetone). Not sure whether that's relevant to your situation. Henry On Wed, Nov 7, 2012 at 12:42 PM, Ken wrote: > > Yes it might. Factory settings of sidetone and mic gain were too high > for my headset causing distortion. Believe I also had to increase > squelch. Has worked well after that for several years now. > Ken > > > On 07/11/2012 3:18 PM, SIDESLIP wrote: > >> --> AeroElectric-List message posted by: >> "SIDESLIP" >> >> Well...... Radio seems fine. Only thing that was out of whack was the >> sidetone. Apparently it was set really high. Not sure if that has any >> effect or not. >> >> Getting radio back on Friday.... So, we will see. Guess its time to >> move on to other possibilities..... :-/ >> >> Chad >> >> -------- C-GYXQ. 912ULS. 601XL-B >> >> >> >> > > ________________________________ Message 4 _____________________________________ Time: 03:51:59 PM PST US Subject: AeroElectric-List: Re: AeroElectric-List Digest: 29 Msgs - 11/05/12 From: Allan Chong > Time: 07:02:26 AM PST US > From: Tim Olson > Subject: Re: AeroElectric-List: Re: Soldering Iron Recommendations > > Is there a chance that you or someone could offer up what would be a > good model of station to go with for someone who wants to do > general electronics/avionics work? I noted you said the STTC-147 > tips. Just browsed eBay and saw there are many models. > I have 2 weller stations right now, and use the tiny point pencil > tips quite a bit. I don't really *need* a new station, but hey, > if they're as good as you say, I could be up for buying one. > I' probably get new though if possible. > Tim > I've got a PS2E. Works very very well and was maybe $50 on ebay. I've heard the cords are fragile, but I've never had a problem. If you've used the standard cheap Weller or worse, you'll wonder what the heck you were doing before. It certainly wasn't soldering. Btw, after getting a ride in a RV6 at the factory years ago, the pilot stopped in one of their front hangar rooms and showed part of a 4 place plane being riveted. "We think we're going to call this the RV10" ________________________________ Message 5 _____________________________________ Time: 05:17:16 PM PST US Subject: AeroElectric-List: Beautiful Jade Pendants Online! From: "dshfjhj" This developed normal Jade Pendant (http://www.jadejewelrymall.com/jadeite-pendant.html) is put by 18k shiny precious metal or jewelry and developed with a small historical cash necklace, a jadeite tablet and a precious metal variety on the top. Both of top and base of normal jade pendant is developed with a small jadeite tablet. The exterior of normal jade pendant is strong and challenging. Green Jade (http://www.jadejewelrymall.com) The gorgeous dark red with dark-colored normal are involved and allocated all over this necklace. It is also developed with ice shiny and lighting normal of jadeite necklace and pellets and make it look more dynamic. Read this topic online here: http://forums.matronics.com/viewtopic.php?p=387195#387195 ________________________________ Message 6 _____________________________________ Time: 06:22:59 PM PST US From: RGent1224@aol.com Subject: AeroElectric-List: for Bob I sent you an E-Mail thru your web site and I believe it to be rejected for improper email address format that I put in correctly. Here is the message that I sent you Thanks Dick I have the following crimper and would like to get the instruction sheet for it if possible Manufacturer: Clark CABLE Part Number: MS25037-1A FSN: 5120-00-596-9313 I've had it for a long time and played with it but am now getting ready to wire my homebuilt airplane and would like to know that I'm using it properly. Thanks Dick E-Mail _rgent1224@aol.com_ (mailto:rgent1224@aol.com) ________________________________ Message 7 _____________________________________ Time: 09:40:53 PM PST US From: "Robert L. Nuckolls, III" Subject: Re: AeroElectric-List: for Bob At 08:21 PM 11/7/2012, you wrote: >I sent you an E-Mail thru your web site and I believe it to be >rejected for improper email address format that I put in correctly. >Here is the message that I sent you >Thanks >Dick > >I have the following crimper and would like to get the instruction >sheet for it if possible >Manufacturer: Clark CABLE >Part Number: MS25037-1A >FSN: 5120-00-596-9313 >I've had it for a long time and played with it but am now getting >ready to wire my homebuilt airplane and would like to know that I'm >using it properly. >Thanks >Dick >E-Mail rgent1224@aol.com Yeah, I've got a bug I need to fix on that script. I don't think there's a manual for that tool. They're pretty generic technology. Bob . . . ________________________________ Message 8 _____________________________________ Time: 09:52:12 PM PST US From: dstevenco@comcast.net Subject: Re: AeroElectric-List: for Bob Bob, The same thing happened to me when I tried to order your book. I am wiring up my Zenith with your z-16. Good luck fixing the problem. Darren ----- Original Message ----- From: "Robert L. Nuckolls, III" Sent: Wednesday, November 7, 2012 9:39:29 PM Subject: Re: AeroElectric-List: for Bob At 08:21 PM 11/7/2012, you wrote: I sent you an E-Mail thru your web site and I believe it to be rejected for improper email address format that I put in correctly. Here is the message that I sent you Thanks Dick I have the following crimper and would like to get the instruction sheet for it if possible Manufacturer: Clark CABLE Part Number: MS25037-1A FSN: 5120-00-596-9313 I've had it for a long time and played with it but am now getting ready to wire my homebuilt airplane and would like to know that I'm using it properly. Thanks Dick E-Mail rgent1224@aol.com Yeah, I've got a bug I need to fix on that script. I don't think there's a manual for that tool. They're pretty generic technology. ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message aeroelectric-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/AeroElectric-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/aeroelectric-list Browse Digests http://www.matronics.com/digest/aeroelectric-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.