---------------------------------------------------------- AeroElectric-List Digest Archive --- Total Messages Posted Fri 11/09/12: 3 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 09:30 AM - Re: PMR1-14V problem (Robert L. Nuckolls, III) 2. 10:42 AM - Re: PMR1-14V problem (Etienne Phillips) 3. 04:36 PM - Re: AeroElectric-List Digest: 29 Msgs - 11/05/12 (Eric M. Jones) ________________________________ Message 1 _____________________________________ Time: 09:30:23 AM PST US From: "Robert L. Nuckolls, III" Subject: Re: AeroElectric-List: PMR1-14V problem > >Any ideas for fault tracing the wiring (so that the same doesn't >happen to a replacement), or does this look like an internal >manufacturing fault? Something is wrong inside. Get with B&C and see if they'd like to exchange it for a new one. They may be interested and willing to do a failure analysis. In any instance they need to be aware of the event. Bob . . . ________________________________ Message 2 _____________________________________ Time: 10:42:58 AM PST US Subject: Re: AeroElectric-List: PMR1-14V problem From: Etienne Phillips On Friday, 9 November 2012, Robert L. Nuckolls, III wrote: > nuckolls.bob@aeroelectric.com> > > >> Any ideas for fault tracing the wiring (so that the same doesn't happen >> to a replacement), or does this look like an internal manufacturing fault? >> > > Something is wrong inside. Get with B&C and see if > they'd like to exchange it for a new one. They may > be interested and willing to do a failure analysis. > In any instance they need to be aware of the event. > > > Bob . . . > > Will do so! Thanks Etienne ________________________________ Message 3 _____________________________________ Time: 04:36:56 PM PST US Subject: AeroElectric-List: Re: AeroElectric-List Digest: 29 Msgs - 11/05/12 From: "Eric M. Jones" Joe, > I, too, am one of the people who has his Metcal station up an a pedestal with motherhood and apple pie and I'd quit flying before giving it up, BUT, before anyone starts thinking that it is the solution to all the world's problems, there is one thing it still wont do. You can not use it to solder an IC in a BGA (ball grid array) package to a multilayer PCB.http://www.mectronics.in/metcal-bga-rework-system.htm do not archive -------- Eric M. Jones www.PerihelionDesign.com 113 Brentwood Drive Southbridge, MA 01550 (508) 764-2072 emjones(at)charter.net Read this topic online here: http://forums.matronics.com/viewtopic.php?p=387407#387407 ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message aeroelectric-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/AeroElectric-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/aeroelectric-list Browse Digests http://www.matronics.com/digest/aeroelectric-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.