Today's Message Index:
----------------------
1. 04:32 AM - Re: Icon 210 wiring (Charles Plumery)
Message 1
INDEX | Back to Main INDEX |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Icon 210 wiring |
Thanks Bob,
Chuck
On May 25, 2013, at 11:42 PM, "Robert L. Nuckolls, III" <nuckolls.bob@aeroel
ectric.com> wrote:
ls.bob@aeroelectric.com>
>
> At 09:15 PM 5/25/2013, you wrote:
>> Hello,
>> I am a complete beginner in electronics but having Internet access and yo
ur book I have come to the conclusion that I have wired the moles connector o
n my Icom 210 incorrectly because I did not use shielded wire for the connec
tions with a circle around the conductor to ground. Can you confirm that I n
eed to retire the moles using shielded wiring\
>
> It's probably not serious. However, SOME of
> the wires may show shield connections at BOTH
> ends . . . in which case you need to add a wire
> to take care of the signals that flowed on the
> shields.
>
> It's a rare installation that suffers because
> the wires are not shielded.
>
>
>
>
> Bob . . .
>
==========================
=========
==========================
=========
==========================
=========
==========================
=========
>
>
>
>
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|