---------------------------------------------------------- AeroElectric-List Digest Archive --- Total Messages Posted Tue 06/04/13: 2 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 05:05 AM - Re: Re: Icom Ic-A210 (Charles Plumery) 2. 08:56 AM - Looking for help (Charles Brame) ________________________________ Message 1 _____________________________________ Time: 05:05:31 AM PST US Subject: Re: AeroElectric-List: Re: Icom Ic-A210 From: Charles Plumery That does it, thanks Bob. Chuck =9CA nation can survive its fools, and even the ambitious. But it cann ot survive treason from within. An enemy at the gates is less formidable, fo r he is known and carries his banner openly. But the traitor moves amongst t hose within the gate freely, his sly whispers rustling through all the alley s, heard in the very halls of government itself. M T Cicero On Jun 4, 2013, at 1:30 AM, "Robert L. Nuckolls, III" wrote: > At 12:48 PM 6/3/2013, you wrote: >> Ok Bob, >> I guess I didn't express myself correctly as I am having trouble with the symbiology involved with these devices. Is it correct to say that the symbo l that looks like a little rectangle is the symbol for the "sleeve"? And is i t correct that the symbol that looks like an inverted pyramid blackened is f or the "ring"? And for clarification purposes in your drawing of the Microco m 760VHF transceiver is the symbol that looks like a Pyramid blackened the " tip" or PTT? > > > I'm not aware of any 'convention' for this symbol. > > > > I've drawn it both ways when both mic (ring) and > PTT (tip) are connected. Your 'clue' is the relative > position of the two contacts. The one nearest the > mount would be sleeve; the one furthest away would be > the tip. > > The problem you're wrestling with is ICOM's use > of the symbol wherein the UNUSED terminal is not > shown . . . so if only one is shown, which one > is it? You have to deduce tip from ring by tracing > where it's wired to the rest of the system. In my > earlier posting, I deduced that the contacts shown > were mic (ring) connections because they were wired > to mic audio terminals for the radio. > > If I were making the drawing, I might use either > of the two versions shown but I would leave the > UNUSED terminal in place such that it's obvious > as to which one IS used. > > > Bob . . . ________________________________ Message 2 _____________________________________ Time: 08:56:08 AM PST US From: Charles Brame Subject: AeroElectric-List: Looking for help The spark plug wires provided with my ElectroAir Electronic Ignition had no cuts in them. They appeared to be standard spark plug wires. I have had no issues with the supplied wires over the six years I've been flying with them. Charlie Brame RV-6A N11CB San Antonio -------------------------------------- > Time: 05:25:00 AM PST US > From: victor delta > Subject: AeroElectric-List: Looking for Help > > > Fellow Forum members: > > If anyone is familiar with and can help with the following matter it would be appreciated. > > Background: > Installing Electroair Electronic Ignition on TCM TSIO 550E powerplant. > During component installation discovered manufacturer supplied spark plug wiring > to have numerous small cuts in the lines. > Electroair supplies and recommends "...an 8mm or larger spiral core wire with a > resistance of 300 ohms or greater per foot." "Electroair uses the Taylor Pro-Wire > Silicon Resistor Spiral Wire." > Based upon this experience with the provided wire I am looking for a more robust/durable/damage > resistant replacement spark plug lead wire OR (confirmation) > that the Electroair supplied wire is the best available for the intended use?!? > > Issue: > Taylor Cable Products has multiple products meeting the Electroair stated specification. > Which one might be the most applicable to my needs and why ( the latter for my > personal better understanding of the underlying issues and solution)? > > PLUS....... ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message aeroelectric-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/AeroElectric-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/aeroelectric-list Browse Digests http://www.matronics.com/digest/aeroelectric-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.