---------------------------------------------------------- AeroElectric-List Digest Archive --- Total Messages Posted Fri 12/20/13: 4 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 05:46 AM - Replacement Crimpers (Owen Baker) 2. 08:44 AM - Re: Landing Lights (jonlaury) 3. 10:20 AM - Re: Replacement Crimpers (Bill_Higdon) 4. 01:59 PM - Echoes from yesteryear (Robert L. Nuckolls, III) ________________________________ Message 1 _____________________________________ Time: 05:46:12 AM PST US From: "Owen Baker " Subject: AeroElectric-List: Replacement Crimpers 12/20/2013 Hello Bill Higdon, You wrote: =9COne thing I found is interesting is Amp/Tyco has a simple procedure to verify the crimpers are working properly......=9D And we can find a description of this simple procedure where???? OC 'O C' Baker says "The best investment you can make is the effort to gather and understand information." ========= Time: 04:21:33 PM PST US Subject: AeroElectric-List: Re: Replacement Crimpers From: "Bill_Higdon" Bob, Thanks for your reply, I started using crimpers with replaceable dies when I started working with small quantities of many different coax connectors. One thing I found is interesting is Amp/Tyco has a simple procedure to verify the crimpers are working properly something I haven't seen for any of the other manufacturers. Bill Read this topic online here: http://forums.matronics.com/viewtopic.php?p=415881#415881 ________________________________ Message 2 _____________________________________ Time: 08:44:16 AM PST US Subject: AeroElectric-List: Re: Landing Lights From: "jonlaury" nuckolls.bob(at)aeroelect wrote: > At 07:15 PM 12/18/2013, you wrote: > > > I have a quantity of these filter boards. They're > about 1/2 x 1/2 inch and mount a compliment of > filter caps and ferrite noise attenuators. > > If anyone discovers a need for some noise suppression > on commercial off the shelf led appliances, these > are available. > > > > Bob . . . Bob, I have an LED cabin light that has capacitance control (ON/OFF, dim) that picks up stray interference causing it to go into a flashing mode uncontrollable by the ON/OFF function. The only way that I can stop it is by pulling the fuse. Would your 1/2 x 1/2 filter boards be appropriate for solving this annoyance? Thanks John Read this topic online here: http://forums.matronics.com/viewtopic.php?p=415918#415918 ________________________________ Message 3 _____________________________________ Time: 10:20:59 AM PST US Subject: AeroElectric-List: Re: Replacement Crimpers From: "Bill_Higdon" [quote="bakerocb"]12/20/2013 Hello Bill Higdon, You wrote: One thing I found is interesting is Amp/Tyco has a simple procedure to verify the crimpers are working properly...... And we can find a description of this simple procedure where???? OC 'O C' Baker says "The best investment you can make is the effort to gather and understand information." ================================== Time: 04:21:33 PM PST US Subject: AeroElectric-List: Re: Replacement Crimpers From: "Bill_Higdon" Bob, Thanks for your reply, I started using crimpers with replaceable dies when I started working with small quantities of many different coax connectors. One thing I found is interesting is Amp/Tyco has a simple procedure to verify the crimpers are working properly something I haven't seen for any of the other manufacturers. Bill Read this topic online here: http://forums.matronics.com/viewtopic.php?p=415881#415881 It's in ENG_SS_408--9252_1.pdf, which I attached, on page 3 figure 4. Bill > [b] Read this topic online here: http://forums.matronics.com/viewtopic.php?p=415928#415928 Attachments: http://forums.matronics.com//files/eng_ss_408_9252_j_184.pdf ________________________________ Message 4 _____________________________________ Time: 01:59:41 PM PST US From: "Robert L. Nuckolls, III" Subject: AeroElectric-List: Echoes from yesteryear I've been working with a gentleman who is wanting to restore what had to be a real leading edge example of avionics technology in 1949 . . . but then it was a Bill Lear invention so I guess we shouldn't be surprised. The data package for the LTRA6 radio in all it's configurations can be downloaded at: http://tinyurl.com/kszadqy I'm still looking for data on the omni-radio display heads including the cross-pointer and/or the CRT omni-scope displays. If anyone runs across documents on these items I'd be very pleased to add them to the library. High voltage for the vacuum tubes was produced by a little motor-generator not unlike this one: Emacs! These would take in 6, 12 or 24 volts (6v airplanes in 1949??? maybe these radios were installed in airport ground service vehicles too). I was amazed at the clever marker-beacon receiver feature . . . a simple 'crystal radio' like detector that looked at rf from the belly mounted sled-runner and dumped the audio right into the VHF comm receiver's signal stream. Stone simple. Bob . . . ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message aeroelectric-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/AeroElectric-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/aeroelectric-list Browse Digests http://www.matronics.com/digest/aeroelectric-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.