Today's Message Index:
----------------------
1. 08:56 AM - Molex 638190100A crimper (jonlaury)
2. 04:08 PM - pins for audio panel (Dj Merrill)
3. 04:25 PM - Re: pins for audio panel (Gordon Parker)
4. 05:06 PM - Re: Molex 638190100A crimper (Robert L. Nuckolls, III)
5. 10:03 PM - Re: engine pressure senders installation (Matthew Prather)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Molex 638190100A crimper |
I have a 1x job that calls for this crimper, but it's almost $300. Anybody know
of a less expensive equivalent?
Anybody have one that they would loan or rent for 2-3 days?
Thanks,
John
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=418613#418613
Message 2
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | pins for audio panel |
I bought a used PS Engineering PMA7000MS audio panel. I have some pins
for it, but I would like to buy more. They fit into a card edge
connector, take a mini molex crimper, and look like this:
http://deej.net/glastar/pics/panel/SL15M-pin1.jpg
http://deej.net/glastar/pics/panel/SL15M-pin2.jpg
I found some at Digikey that look similar:
http://www.digikey.com/product-detail/en/350011-1/350011-1-ND/292950
Does anyone know if these would work?
Thanks,
-Dj
--
Dj Merrill - N1JOV - VP EAA Chapter 87
Sportsman 2+2 Builder #7118 N421DJ - http://deej.net/sportsman/
Glastar Flyer N866RH - http://deej.net/glastar/
Message 3
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: pins for audio panel |
Steinair has lots of them
On Wed, Feb 12, 2014 at 4:06 PM, Dj Merrill <deej@deej.net> wrote:
>
> I bought a used PS Engineering PMA7000MS audio panel. I have some pins
> for it, but I would like to buy more. They fit into a card edge connector,
> take a mini molex crimper, and look like this:
>
> http://deej.net/glastar/pics/panel/SL15M-pin1.jpg
>
> http://deej.net/glastar/pics/panel/SL15M-pin2.jpg
>
> I found some at Digikey that look similar:
>
> http://www.digikey.com/product-detail/en/350011-1/350011-1-ND/292950
>
> Does anyone know if these would work?
>
> Thanks,
>
> -Dj
>
>
> --
> Dj Merrill - N1JOV - VP EAA Chapter 87
> Sportsman 2+2 Builder #7118 N421DJ - http://deej.net/sportsman/
> Glastar Flyer N866RH - http://deej.net/glastar/
>
>
Message 4
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Molex 638190100A crimper |
At 10:54 AM 2/12/2014, you wrote:
>
>I have a 1x job that calls for this crimper, but it's almost $300.
>Anybody know of a less expensive equivalent?
>Anybody have one that they would loan or rent for 2-3 days?
Molex b-crimp pins?
Bob . . .
Message 5
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: engine pressure senders installation |
Nice set of photos Bob.. I wonder if you also went back and provided strain relief
for the hose. I believe strain relief for the hose might be more important
than remote mounting the sender.
Regards,
Matt-
> On Feb 6, 2014, at 11:45 AM, Robert Borger <rlborger@mac.com> wrote:
>
>
> Carlos,
>
> You can see how I did it at: http://www.europaowners.org/main.php?g2_itemId=67636
>
> The first 11 pictures show how I did a remote mount of the oil pressure sender.
>
> Blue skies & tailwinds,
> Bob Borger
> Europa XS Tri, Rotax 914, Airmaster C/S Prop (50 hrs).
> Little Toot Sport Biplane, Lycoming Thunderbolt AEIO-320 EXP
> 3705 Lynchburg Dr.
> Corinth, TX 76208-5331
> Cel: 817-992-1117
> rlborger@mac.com
>
> On Feb 6, 2014, at 9:45 AM, Carlos Trigo <trigo@mail.telepac.pt> wrote:
>
>
> Tim
>
> So, what is the way to mount engine pressure senders not cantilevered?
>
> Carlos
>
>
>
>
>
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|