---------------------------------------------------------- AeroElectric-List Digest Archive --- Total Messages Posted Wed 02/12/14: 5 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 08:56 AM - Molex 638190100A crimper (jonlaury) 2. 04:08 PM - pins for audio panel (Dj Merrill) 3. 04:25 PM - Re: pins for audio panel (Gordon Parker) 4. 05:06 PM - Re: Molex 638190100A crimper (Robert L. Nuckolls, III) 5. 10:03 PM - Re: engine pressure senders installation (Matthew Prather) ________________________________ Message 1 _____________________________________ Time: 08:56:23 AM PST US Subject: AeroElectric-List: Molex 638190100A crimper From: "jonlaury" I have a 1x job that calls for this crimper, but it's almost $300. Anybody know of a less expensive equivalent? Anybody have one that they would loan or rent for 2-3 days? Thanks, John Read this topic online here: http://forums.matronics.com/viewtopic.php?p=418613#418613 ________________________________ Message 2 _____________________________________ Time: 04:08:40 PM PST US Subject: AeroElectric-List: pins for audio panel From: Dj Merrill I bought a used PS Engineering PMA7000MS audio panel. I have some pins for it, but I would like to buy more. They fit into a card edge connector, take a mini molex crimper, and look like this: http://deej.net/glastar/pics/panel/SL15M-pin1.jpg http://deej.net/glastar/pics/panel/SL15M-pin2.jpg I found some at Digikey that look similar: http://www.digikey.com/product-detail/en/350011-1/350011-1-ND/292950 Does anyone know if these would work? Thanks, -Dj -- Dj Merrill - N1JOV - VP EAA Chapter 87 Sportsman 2+2 Builder #7118 N421DJ - http://deej.net/sportsman/ Glastar Flyer N866RH - http://deej.net/glastar/ ________________________________ Message 3 _____________________________________ Time: 04:25:57 PM PST US Subject: Re: AeroElectric-List: pins for audio panel From: Gordon Parker Steinair has lots of them On Wed, Feb 12, 2014 at 4:06 PM, Dj Merrill wrote: > > I bought a used PS Engineering PMA7000MS audio panel. I have some pins > for it, but I would like to buy more. They fit into a card edge connector, > take a mini molex crimper, and look like this: > > http://deej.net/glastar/pics/panel/SL15M-pin1.jpg > > http://deej.net/glastar/pics/panel/SL15M-pin2.jpg > > I found some at Digikey that look similar: > > http://www.digikey.com/product-detail/en/350011-1/350011-1-ND/292950 > > Does anyone know if these would work? > > Thanks, > > -Dj > > > -- > Dj Merrill - N1JOV - VP EAA Chapter 87 > Sportsman 2+2 Builder #7118 N421DJ - http://deej.net/sportsman/ > Glastar Flyer N866RH - http://deej.net/glastar/ > > ________________________________ Message 4 _____________________________________ Time: 05:06:57 PM PST US From: "Robert L. Nuckolls, III" Subject: Re: AeroElectric-List: Molex 638190100A crimper At 10:54 AM 2/12/2014, you wrote: > >I have a 1x job that calls for this crimper, but it's almost $300. >Anybody know of a less expensive equivalent? >Anybody have one that they would loan or rent for 2-3 days? Molex b-crimp pins? Bob . . . ________________________________ Message 5 _____________________________________ Time: 10:03:30 PM PST US Subject: Re: AeroElectric-List: engine pressure senders installation From: Matthew Prather Nice set of photos Bob.. I wonder if you also went back and provided strain relief for the hose. I believe strain relief for the hose might be more important than remote mounting the sender. Regards, Matt- > On Feb 6, 2014, at 11:45 AM, Robert Borger wrote: > > > Carlos, > > You can see how I did it at: http://www.europaowners.org/main.php?g2_itemId=67636 > > The first 11 pictures show how I did a remote mount of the oil pressure sender. > > Blue skies & tailwinds, > Bob Borger > Europa XS Tri, Rotax 914, Airmaster C/S Prop (50 hrs). > Little Toot Sport Biplane, Lycoming Thunderbolt AEIO-320 EXP > 3705 Lynchburg Dr. > Corinth, TX 76208-5331 > Cel: 817-992-1117 > rlborger@mac.com > > On Feb 6, 2014, at 9:45 AM, Carlos Trigo wrote: > > > Tim > > So, what is the way to mount engine pressure senders not cantilevered? > > Carlos > > > > > ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message aeroelectric-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/AeroElectric-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/aeroelectric-list Browse Digests http://www.matronics.com/digest/aeroelectric-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.