---------------------------------------------------------- AeroElectric-List Digest Archive --- Total Messages Posted Tue 04/29/14: 5 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 01:10 AM - ATS Crimper (Alvin Voigt) 2. 01:20 AM - Fw: ATS Crimper (Alvin Voigt) 3. 10:52 AM - lm7321 substatute (Bill S) 4. 06:42 PM - Battery and master contactor - ok to mount horizontally? (Sacha) 5. 09:45 PM - Re: Battery and master contactor - ok to mount horizontally? (Jeff Luckey) ________________________________ Message 1 _____________________________________ Time: 01:10:36 AM PST US From: "Alvin Voigt" Subject: AeroElectric-List: ATS Crimper ATS has a crimper on sale for $37.50 with additional BNC die sets for $14.95. The assortment of terminals and splices included in the kit are not specifically identified as PDIG, so they my be un-useful for flying machines. I have been using a crimper for many years that I purchased from Bob Knuckles that has been quite satisfactory, but does not have replaceable die sets. http://www.aircraft-tool.com/shop/detail.aspx?PRODUCT_ID=E500-037&utm_s ource=ECLIPSE+APRIL&utm_campaign=ECLIPSE+APRIL&utm_medium=email Alvin Voigt, Ashford, WA ________________________________ Message 2 _____________________________________ Time: 01:20:03 AM PST US From: "Alvin Voigt" Subject: AeroElectric-List: Fw: ATS Crimper Sorry, I meant PIDG terminals and Bob Nuckolls. Past my bed time, I suppose. Alvin From: Alvin Voigt Sent: Tuesday, April 29, 2014 1:09 AM Subject: ATS Crimper ATS has a crimper on sale for $37.50 with additional BNC die sets for $14.95. The assortment of terminals and splices included in the kit are not specifically identified as PDIG, so they my be un-useful for flying machines. I have been using a crimper for many years that I purchased from Bob Knuckles that has been quite satisfactory, but does not have replaceable die sets. http://www.aircraft-tool.com/shop/detail.aspx?PRODUCT_ID=E500-037&utm_s ource=ECLIPSE+APRIL&utm_campaign=ECLIPSE+APRIL&utm_medium=email Alvin Voigt, Ashford, WA ________________________________ Message 3 _____________________________________ Time: 10:52:37 AM PST US From: "Bill S" Subject: AeroElectric-List: lm7321 substatute Bob Can you recomend a substatute for a lm7321 opamp, in a din package? The sot23 package is just tooooooo small for me to work with. Thanks Bill S. ________________________________ Message 4 _____________________________________ Time: 06:42:41 PM PST US Subject: AeroElectric-List: Battery and master contactor - ok to mount horizontally? From: Sacha Quick question about Battery and contactor installation position: I am moving my battery aft and am planning to make an installation similar to the example on Bob's website at http://www.aeroelectric.com/articles/Battery_Grounds/Battery_Grounds.html Except that instead of having the (SVLA) battery upright I want it on its side. Is that ok? And is it ok to mount the master and starter contactors horizontally (I'm planning to use rivnuts and bolt them to a horizontal sheet of stainless steel) instead of using L-shaped tabs to mount them vertically as in the picture? ________________________________ Message 5 _____________________________________ Time: 09:45:29 PM PST US From: Jeff Luckey Subject: Re: AeroElectric-List: Battery and master contactor - ok to mount horizontally? Mounting the battery on its side and the contactors horizontally is just fi ne.- It won't affect the operation of either device.=0A=0A=0A=0A=0A______ __________________________=0A From: Sacha =0ATo: aeroelec tric-list =0ASent: Tuesday, April 29, 201 4 6:41 PM=0ASubject: AeroElectric-List: Battery and master contactor - ok t ha =0A=0AQuick question about Battery and contactor insta llation position:=0A=0AI am moving my battery aft and am planning to make a n installation similar to the example on Bob's website at http://www.aeroel ectric.com/articles/Battery_Grounds/Battery_Grounds.html =0AExcept that ins tead of having the (SVLA) battery upright I want it on its side. Is that ok ? And is it ok to mount the master and starter contactors horizontally (I'm planning to use rivnuts and bolt them to a horizontal sheet of stainless s teel) instead of using L-shaped tabs to mount them vertically as in the pic = ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message aeroelectric-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/AeroElectric-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/aeroelectric-list Browse Digests http://www.matronics.com/digest/aeroelectric-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.