Today's Message Index:
----------------------
1. 11:24 AM - Fw: Dimmer (DANIEL PELLETIER)
2. 06:29 PM - Re: Young Aviators & B-25 intercom (Robert L. Nuckolls, III)
3. 06:34 PM - Re: Fw: Dimmer (Robert L. Nuckolls, III)
Message 1
INDEX | Back to Main INDEX |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
>
>
>>> Hi Bob,
>>> I'm wiring my Dimmer, i'm not sure that IhVe the lTest version of your Dimmer
And I can't find the old wiring schma. Is that possible to get your prcdent
version of the following
>>>
>>> http://www.aeroelectric.com/articles/Dimmers/9013_Ins.pdf
>>>
>>> Thanks.
>>>
>>> Daniel
>>>
>>>
>>>>
Message 2
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Young Aviators & B-25 intercom |
At 20:48 2015-04-20, you wrote:
>Hi Bob,
>
>For a number of reasons, I had to pass the B-25 intercom project,
>and the parts that you so generously donated, off to a couple of
>other guys involved in it. I'm CC'ing this to one of them, Cliff,
>who is my friend and contact with the fella' actually doing the
>work. His name is Arron. I heard from Cliff today, that Arron built
>the mic circuit and couldn't get it to work. I've been told he's a
>pretty sharp guy, but I don't know what he did for sure. I was
>hoping that you might be willing to correspond with Cliff (& then
>possibly Arron) to help figure out what's going on. I know that
>you're very busy, and that you donate an awful lot of time to
>helping educate dummies like me, so I'm really hesitant to ask it of
>you. Thanks for everything you've done... I know that everyone
>appreciates it very much.
>
>John
No problem. In fact, you might suggest that one
or both join the List to work out the problems.
There may well be others with an interest and
ideas to contribute.
But in any case, I'm pleased to help. Have them
start by identifying the microphones they're
working with. Vintage mics come in two common
varieties, low-z dynamic and carbon. They
behave very differently.
Bob . . .
Message 3
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
At 13:22 2015-04-21, you wrote:
>PELLETIER <pelletie1959@me.com>
>
> >
> >
> >>> Hi Bob,
> >>> I'm wiring my Dimmer, i'm not sure that
> IhVe the lTest version of your Dimmer And I
> can't find the old wiring schma. Is that
> possible to get your prcdent version of the following
> >>>
> >>> http://www.aeroelectric.com/articles/Dimmers/9013_Ins.pdf
Revision E of that document at:
http://www.aeroelectric.com/Catalog/AEC/9013/9013-704E.pdf
Show BOTH versions. Use an ohmmeter to see if
pin 4 measures very low ohms to pin 5. If so,
you have the REV A model, if not it's the earlier
version.
Bob . . .
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|