Today's Message Index:
----------------------
1. 04:41 AM - 220 VAC Diode Functionality (Paul Millner)
2. 06:15 AM - Duplicate Messages (Bill Bradburry)
Message 1
INDEX | Back to Main INDEX |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | 220 VAC Diode Functionality |
On 8/7/2015 7:53 PM, Bill Putney wrote:
> If you are really talking about running a generator with the
> commercial mains, DON'T DO IT!
In general, Bill is of course correct, as he generally is. However,
there is a safe way to do this... with a very robust reverse current
relay that prevents a watt from ever exiting your on-premises system
toward the mains.
There are certification requirements, too, from the utility, which one
ignores at one's own risk of course. But it can be done safely, and even
legally... but it's not super inexpensive.
Easier is an isolation relay that allows EITHER mains power or
self-generation. But this is not a bumpless transfer (power fails and
then is restored...)
Paul
Message 2
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Duplicate Messages |
Just to pass this on.
I had done an upgrade to my Microsoft Office and somehow this upgrade made a
duplicate of my rule to move aeroelectric messages to a folder. I
discovered this rule duplication, removed it and now everything is fine.
Bill
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|