AeroElectric-List Digest Archive

Mon 02/29/16


Total Messages Posted: 7



Today's Message Index:
----------------------
 
     1. 05:03 AM - Re: wiring my amerri-king A-350 to my Narco AT-50A (Robert L. Nuckolls, III)
     2. 05:18 PM - 12V USB Panel Mount Outlet (kearney)
     3. 05:37 PM - Re: 12V USB Panel Mount Outlet (Robert Borger)
     4. 06:05 PM - Re: 12V USB Panel Mount Outlet (Jared Yates)
     5. 07:05 PM - Re: wiring my amerri-king A-350 to my Narco AT-50A (DANIEL PELLETIER)
     6. 08:06 PM - Re: 12V USB Panel Mount Outlet (kearney)
     7. 08:23 PM - Re: 12V USB Panel Mount Outlet (Earl Gmail)
 
 
 


Message 1


  • INDEX
  • Back to Main INDEX
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 05:03:58 AM PST US
    From: "Robert L. Nuckolls, III" <nuckolls.bob@aeroelectric.com>
    Subject: Re: wiring my amerri-king A-350 to my Narco AT-50A
    At 12:24 PM 2/28/2016, you wrote: >I have a question about the blue and pink and blue wires on my >A-350. If my understanding of the schema is right, I must plug these >wires together on hole no 8 of my Narco. ? The image you attached didn't come thru to me but the data I have on the AK350 Encoder seems to confirm your observation . . . Emacs! Bob . . .


    Message 2


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 05:18:31 PM PST US
    Subject: 12V USB Panel Mount Outlet
    From: "kearney" <kearney@shaw.ca>
    Hi I have found that my IPAD doesn't seem to charge all that well with the USB outlets I installed in my panel / console. They are rated at 2.1 amps but I guess there must be more to it than that. Does anyone have a part # / recommendation for a mountable USB port. Inquiring minds need to know.... Cheers Les Read this topic online here: http://forums.matronics.com/viewtopic.php?p=453305#453305


    Message 3


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 05:37:49 PM PST US
    Subject: Re: 12V USB Panel Mount Outlet
    From: Robert Borger <rlborger@mac.com>
    Les, Check out http://commitlift.com for a USB that works and isn=99t noisy. Blue skies & tailwinds, Bob Borger Europa XS Tri, Rotax 914, Airmaster C/S Prop (75 hrs). Little Toot Sport Biplane, Lycoming Thunderbolt AEIO-320 EXP 3705 Lynchburg Dr. Corinth, TX 76208-5331 Cel: 817-992-1117 rlborger@mac.com > On Feb 29, 2016, at 7:16 PM, kearney <kearney@shaw.ca> wrote: > > > Hi > > I have found that my IPAD doesn't seem to charge all that well with the USB outlets I installed in my panel / console. They are rated at 2.1 amps but I guess there must be more to it than that. > > Does anyone have a part # / recommendation for a mountable USB port. > > Inquiring minds need to know.... > > Cheers > > Les


    Message 4


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 06:05:48 PM PST US
    Subject: Re: 12V USB Panel Mount Outlet
    From: Jared Yates <email@jaredyates.com>
    I've been using one from brian@eamanufacturing.com that has worked out well. His website is still under construction, but you can probably get one by asking directly. I got mine from the B&B tent at Oshkosh. On Mon, Feb 29, 2016 at 8:34 PM, Robert Borger <rlborger@mac.com> wrote: > Les, > > Check out http://commitlift.com for a USB that works and isn=99t no isy. > > Blue skies & tailwinds, > Bob Borger > Europa XS Tri, Rotax 914, Airmaster C/S Prop (75 hrs). > Little Toot Sport Biplane, Lycoming Thunderbolt AEIO-320 EXP > 3705 Lynchburg Dr. > Corinth, TX 76208-5331 > Cel: 817-992-1117 > rlborger@mac.com > > On Feb 29, 2016, at 7:16 PM, kearney <kearney@shaw.ca> wrote: > > > Hi > > I have found that my IPAD doesn't seem to charge all that well with the > USB outlets I installed in my panel / console. They are rated at 2.1 amp s > but I guess there must be more to it than that. > > Does anyone have a part # / recommendation for a mountable USB port. > > Inquiring minds need to know.... > > Cheers > > Les > >


    Message 5


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 07:05:41 PM PST US
    Subject: Re: wiring my amerri-king A-350 to my Narco AT-50A
    From: DANIEL PELLETIER <pelletie1959@me.com>
    Thanks. The bare wire of the encoder seems no to fit anywhere, but it's usually grou nd wire. What's the difference with the Black one wich is also a ground wire ? Regards. Envoy=C3=A9 de mon iPad > Le 29 f=C3=A9vr. 2016 =C3- 08:01, Robert L. Nuckolls, III <nuckolls.bob@ aeroelectric.com> a =C3=A9crit : > > At 12:24 PM 2/28/2016, you wrote: >> I have a question about the blue and pink and blue wires on my A-350. If m y understanding of the schema is right, I must plug these wires together on h ole no 8 of my Narco. ? > > > The image you attached didn't come thru to me but the > data I have on the AK350 Encoder seems to confirm your > observation . . . > <2f64e5d.jpg> > Bob . . .


    Message 6


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 08:06:26 PM PST US
    Subject: Re: 12V USB Panel Mount Outlet
    From: "kearney" <kearney@shaw.ca>
    HI Thanks for the advice, greatly appreciated. Cheers Les Read this topic online here: http://forums.matronics.com/viewtopic.php?p=453321#453321


    Message 7


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 08:23:16 PM PST US
    From: Earl Gmail <n233ee@gmail.com>
    Subject: Re: 12V USB Panel Mount Outlet
    Be sure to use a 'cord' made for an iPad not a generic. The charging circuit is in the cord connector. Good luck. > On Feb 29, 2016, at 19:16, kearney <kearney@shaw.ca> wrote: > > > Hi > > I have found that my IPAD doesn't seem to charge all that well with the USB outlets I installed in my panel / console. They are rated at 2.1 amps but I guess there must be more to it than that. > > Does anyone have a part # / recommendation for a mountable USB port. > > Inquiring minds need to know.... > > Cheers > > Les > > > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=453305#453305 > > > > > > > > > >




    Other Matronics Email List Services

  • Post A New Message
  •   aeroelectric-list@matronics.com
  • UN/SUBSCRIBE
  •   http://www.matronics.com/subscription
  • List FAQ
  •   http://www.matronics.com/FAQ/AeroElectric-List.htm
  • Web Forum Interface To Lists
  •   http://forums.matronics.com
  • Matronics List Wiki
  •   http://wiki.matronics.com
  • 7-Day List Browse
  •   http://www.matronics.com/browse/aeroelectric-list
  • Browse AeroElectric-List Digests
  •   http://www.matronics.com/digest/aeroelectric-list
  • Browse Other Lists
  •   http://www.matronics.com/browse
  • Live Online Chat!
  •   http://www.matronics.com/chat
  • Archive Downloading
  •   http://www.matronics.com/archives
  • Photo Share
  •   http://www.matronics.com/photoshare
  • Other Email Lists
  •   http://www.matronics.com/emaillists
  • Contributions
  •   http://www.matronics.com/contribution

    These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.

    -- Please support this service by making your Contribution today! --