---------------------------------------------------------- AeroElectric-List Digest Archive --- Total Messages Posted Mon 05/09/16: 2 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 12:29 PM - Re: Re: finding the correct crimper (Ken Ryan) 2. 12:34 PM - Re: Re: finding the correct crimper (Robert L. Nuckolls, III) ________________________________ Message 1 _____________________________________ Time: 12:29:05 PM PST US From: Ken Ryan Subject: Re: AeroElectric-List: Re: finding the correct crimper The new crimper worked perfectly, first time. Data on crimper: Purchased from crimpsupply.com, SKU 37A11001, Metri-Pack/56 Series/Pack-Con Crimping Tool #6285847. This crimper does not have a slot for the insulation crimp, but one of my other crimpers does. I probably got a little aggressive with the insulation crimp, will correct that on futures. The main thing is that the wire crimp worked perfectly, just as it should, giving a strong, tight good looking crimp. Pictures attached. On Sun, May 8, 2016 at 7:13 PM, Robert L. Nuckolls, III < nuckolls.bob@aeroelectric.com> wrote: > At 08:53 PM 5/8/2016, you wrote: > > Thanks Bob. I have your instruction sheet, so I used it when trying to > crimp. As I said, I didn't have any trouble with the lighter gauge molex > terminals. I will have a better quality crimper this week and according to > the specs it is supposed to work on these exact terminals. As I am running > low on terminals I will wait for those crimpers. They are very similar to > the Delphi crimpers in the picture, but this one is definitely supposed to > be for these exact terminals. > > > I got lots of them. If you run low, drop > me your mailing address. > > Bob . . . > ________________________________ Message 2 _____________________________________ Time: 12:34:06 PM PST US From: "Robert L. Nuckolls, III" Subject: Re: AeroElectric-List: Re: finding the correct crimper At 02:26 PM 5/9/2016, you wrote: >The new crimper worked perfectly, first time. >Data on crimper: Purchased from >crimpsupply.com, SKU >37A11001, Metri-Pack/56 Series/Pack-Con Crimping >Tool #6285847. This crimper does not have a slot >for the insulation crimp, but one of my other >crimpers does. I probably got a little >aggressive with the insulation crimp, will >correct that on futures. The main thing is that >the wire crimp worked perfectly, just as it >should, giving a strong, tight good looking crimp. Pictures attached.=C2 Good show! Bob . . . ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message aeroelectric-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/AeroElectric-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/aeroelectric-list Browse Digests http://www.matronics.com/digest/aeroelectric-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.