---------------------------------------------------------- AeroElectric-List Digest Archive --- Total Messages Posted Fri 08/19/16: 2 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 02:17 PM - ADSB annunciator and AC 20-165B (eschlanser) 2. 02:29 PM - Re: ADSB annunciator and AC 20-165B (Ralph E. Capen) ________________________________ Message 1 _____________________________________ Time: 02:17:29 PM PST US Subject: AeroElectric-List: ADSB annunciator and AC 20-165B From: "eschlanser" I'm finishing the installation of a Navworx ADS600B in my already flying ABAM plane. The installation is finished except for an ADSB annunciator. Per AC 20-165B para 3.7.2.1, "For legacy mode C installations that are adding a UAT device, the following two failure annunciations are optional" and are listed as ADS-B Device Failure and Function Failure. Of course, there is more verbiage that is confusing me as it refers to initial airworthiness certification (STC or TC). The good folks at Navworx seem to have left for the weekend so my call to them went unanswered. Does anyone here know if an annunciator for status failures of the Navworx ADS600B are a required part of the installation? Eric Schlanser South Haven, MI Read this topic online here: http://forums.matronics.com/viewtopic.php?p=459663#459663 ________________________________ Message 2 _____________________________________ Time: 02:29:49 PM PST US From: "Ralph E. Capen" Subject: RE: AeroElectric-List: ADSB annunciator and AC 20-165B I didn't put them in my 6A.... I couldn't find anything the stated 'required'...plenty that said 'optional'. My .02 -----Original Message----- From: owner-aeroelectric-list-server@matronics.com [mailto:owner-aeroelectric-list-server@matronics.com] On Behalf Of eschlanser Sent: Friday, August 19, 2016 5:16 PM Subject: AeroElectric-List: ADSB annunciator and AC 20-165B --> I'm finishing the installation of a Navworx ADS600B in my already flying ABAM plane. The installation is finished except for an ADSB annunciator. Per AC 20-165B para 3.7.2.1, "For legacy mode C installations that are adding a UAT device, the following two failure annunciations are optional" and are listed as ADS-B Device Failure and Function Failure. Of course, there is more verbiage that is confusing me as it refers to initial airworthiness certification (STC or TC). The good folks at Navworx seem to have left for the weekend so my call to them went unanswered. Does anyone here know if an annunciator for status failures of the Navworx ADS600B are a required part of the installation? Eric Schlanser South Haven, MI Read this topic online here: http://forums.matronics.com/viewtopic.php?p=459663#459663 ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message aeroelectric-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/AeroElectric-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/aeroelectric-list Browse Digests http://www.matronics.com/digest/aeroelectric-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.