---------------------------------------------------------- AeroElectric-List Digest Archive --- Total Messages Posted Fri 02/03/17: 13 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 04:56 AM - Stall - Stall (JOHN TIPTON) 2. 05:34 AM - Re: Stall - Stall (Alec Myers) 3. 05:39 AM - Re: Stall - Stall (C&K) 4. 05:45 AM - Re: Stall - Stall (Alec Myers) 5. 05:45 AM - Re: Stall - Stall (John Tipton) 6. 05:55 AM - Re: Stall - Stall (John Tipton) 7. 05:56 AM - Re: Stall - Stall (John Tipton) 8. 06:24 AM - Re: Stall - Stall (Charlie England) 9. 06:52 AM - Re: Stall - Stall (user9253) 10. 07:29 AM - Re: Re: Stall - Stall (C&K) 11. 10:31 AM - GNS 480 And Install kit. (don van santen) 12. 01:35 PM - Battery heater (Steve Kelly) 13. 05:21 PM - Re: Battery heater (user9253) ________________________________ Message 1 _____________________________________ Time: 04:56:30 AM PST US Subject: AeroElectric-List: Stall - Stall From: "JOHN TIPTON" Hi Guys My granddaughter has some dolls that talk, how can one modify (or construct ones own) a voice generator that says: (for obvious reasons) Stall Stall Regards: John Read this topic online here: http://forums.matronics.com/viewtopic.php?p=465685#465685 ________________________________ Message 2 _____________________________________ Time: 05:34:42 AM PST US Subject: Re: AeroElectric-List: Stall - Stall From: Alec Myers You could 1. if there's a memory chip you could reprogram it, or replace it with one with your own data 2. you could replace part of the circuit with a microcontroller of your own to bash out your own audio but use the same output stage - amplifier and speaker. Two seconds of 8kHz sampled audio is 16KBytes, or half that if you use 4 bit samples. You could find a microcontroller with enough memory or use an external memory chip. Any $1 microcontroller now has a D to A, or you can bit-bash your own with a resistor ladder or 4 or 8 bit PWM output 3. you could build your own system from scratch and put it in the doll On 3Feb2017, at 1:53 PM, JOHN TIPTON wrote: Hi Guys My granddaughter has some dolls that talk, how can one modify (or construct ones own) a voice generator that says: (for obvious reasons) Stall Stall Regards: John Read this topic online here: http://forums.matronics.com/viewtopic.php?p=465685#465685 ________________________________ Message 3 _____________________________________ Time: 05:39:03 AM PST US Subject: Re: AeroElectric-List: Stall - Stall From: C&K I am using an older ISD1730 evaluation board that was around $10. from digi-key for 3 different voice warnings on my amphib. Today I'd start by looking at something like this https://www.sparkfun.com/products/retired/10653 and I'd google "arduino voice recorder" Ken On 03/02/2017 7:53 AM, JOHN TIPTON wrote: > > Hi Guys > My granddaughter has some dolls that talk, how can one modify (or construct ones own) a voice generator that says: (for obvious reasons) Stall Stall > Regards: John > > ________________________________ Message 4 _____________________________________ Time: 05:45:30 AM PST US Subject: Re: AeroElectric-List: Stall - Stall From: Alec Myers Someone's done all the hard work for you ... https://learn.adafruit.com/adafruit-audio-fx-sound-board On 3Feb2017, at 2:36 PM, C&K wrote: I am using an older ISD1730 evaluation board that was around $10. from digi-key for 3 different voice warnings on my amphib. Today I'd start by looking at something like this https://www.sparkfun.com/products/retired/10653 and I'd google "arduino voice recorder" Ken On 03/02/2017 7:53 AM, JOHN TIPTON wrote: > > Hi Guys > My granddaughter has some dolls that talk, how can one modify (or construct ones own) a voice generator that says: (for obvious reasons) Stall Stall > Regards: John > > ________________________________ Message 5 _____________________________________ Time: 05:45:58 AM PST US Subject: Re: AeroElectric-List: Stall - Stall From: John Tipton Answer 1) How ? Answer 2). How ? Answer 3) How ? (doll = aeroplane) Sent from my iPad ----x--O--x---- > On 3 Feb 2017, at 01:32 pm, Alec Myers wrote: > > > You could > > 1. if there's a memory chip you could reprogram it, or replace it with one with your own data > > 2. you could replace part of the circuit with a microcontroller of your own to bash out your own audio but use the same output stage - amplifier and speaker. Two seconds of 8kHz sampled audio is 16KBytes, or half that if you use 4 bit samples. You could find a microcontroller with enough memory or use an external memory chip. Any $1 microcontroller now has a D to A, or you can bit-bash your own with a resistor ladder or 4 or 8 bit PWM output > > 3. you could build your own system from scratch and put it in the doll > > > On 3Feb2017, at 1:53 PM, JOHN TIPTON wrote: > > > Hi Guys > My granddaughter has some dolls that talk, how can one modify (or construct ones own) a voice generator that says: (for obvious reasons) Stall Stall > Regards: John > > > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=465685#465685 > > > > > > > > > > > > > > ________________________________ Message 6 _____________________________________ Time: 05:55:05 AM PST US Subject: Re: AeroElectric-List: Stall - Stall From: John Tipton Ken Thank you: that's the type of answer that helps Regards: John Sent from my iPad ----x--O--x---- > On 3 Feb 2017, at 01:43 pm, Alec Myers wrote: > > > Someone's done all the hard work for you ... > > > https://learn.adafruit.com/adafruit-audio-fx-sound-board > > > On 3Feb2017, at 2:36 PM, C&K wrote: > > > I am using an older ISD1730 evaluation board that was around $10. from digi-key for 3 different voice warnings on my amphib. > Today I'd start by looking at something like this > https://www.sparkfun.com/products/retired/10653 > and I'd google "arduino voice recorder" > Ken > >> On 03/02/2017 7:53 AM, JOHN TIPTON wrote: >> >> Hi Guys >> My granddaughter has some dolls that talk, how can one modify (or construct ones own) a voice generator that says: (for obvious reasons) Stall Stall >> Regards: John > > > > > > > > > ________________________________ Message 7 _____________________________________ Time: 05:56:25 AM PST US Subject: Re: AeroElectric-List: Stall - Stall From: John Tipton Alec Thank you John Sent from my iPad ----x--O--x---- > On 3 Feb 2017, at 01:43 pm, Alec Myers wrote: > > > Someone's done all the hard work for you ... > > > https://learn.adafruit.com/adafruit-audio-fx-sound-board > > > On 3Feb2017, at 2:36 PM, C&K wrote: > > > I am using an older ISD1730 evaluation board that was around $10. from digi-key for 3 different voice warnings on my amphib. > Today I'd start by looking at something like this > https://www.sparkfun.com/products/retired/10653 > and I'd google "arduino voice recorder" > Ken > >> On 03/02/2017 7:53 AM, JOHN TIPTON wrote: >> >> Hi Guys >> My granddaughter has some dolls that talk, how can one modify (or construct ones own) a voice generator that says: (for obvious reasons) Stall Stall >> Regards: John > > > > > > > > > ________________________________ Message 8 _____________________________________ Time: 06:24:09 AM PST US From: Charlie England Subject: Re: AeroElectric-List: Stall - Stall I've seen birthday cards that let you record your own audio message. Gutting one of those might be the easiest way to do what you want, if you have some soldering skills. Charlie On Fri, Feb 3, 2017 at 7:53 AM, John Tipton wrote: > jmtipton@btopenworld.com> > > Alec > Thank you > John > > Sent from my iPad > > ----x--O--x---- > > > On 3 Feb 2017, at 01:43 pm, Alec Myers wrote: > > > > > > Someone's done all the hard work for you ... > > > > > > https://learn.adafruit.com/adafruit-audio-fx-sound-board > > > > > ________________________________ Message 9 _____________________________________ Time: 06:52:20 AM PST US Subject: AeroElectric-List: Re: Stall - Stall From: "user9253" I have used an "ISD1820 Voice Record Module" with success: eBay item number: 201708883118 $1.63 with free shipping. It takes one month to ship from China. -------- Joe Gores Read this topic online here: http://forums.matronics.com/viewtopic.php?p=465699#465699 ________________________________ Message 10 ____________________________________ Time: 07:29:45 AM PST US Subject: Re: AeroElectric-List: Re: Stall - Stall From: C&K I have used many of the Chinese knockoffs for cheap experiments or where saving pennies is important but expect zero support for the product other than free replacement if you get a dud. For a one off or first time project I recommend using adafruit.com or sparkfun.com or similar vendors to increase the chances of success with greatly reduced aggravation. Minor changes in some of these products can chew up a lot of time sorting things out. Ken On 03/02/2017 9:49 AM, user9253 wrote: > > I have used an "ISD1820 Voice Record Module" with success: > eBay item number: 201708883118 $1.63 with free shipping. > It takes one month to ship from China. > > -------- > Joe Gores > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=465699#465699 > > ________________________________ Message 11 ____________________________________ Time: 10:31:46 AM PST US From: don van santen Subject: AeroElectric-List: GNS 480 And Install kit. Just in case my previous post did not get through, I have a Garmin 480 WASS with the install kit that I will be removing from my AC in a few weeks.also a Navworx ADS-B, and a Garmin transponder and audio panel. If any one is interested I will discuss any offers for any or all the items. All work. Don ________________________________ Message 12 ____________________________________ Time: 01:35:16 PM PST US Subject: AeroElectric-List: Battery heater From: "Steve Kelly" While waiting for the preheat on my engine I got to thinking about warming up the battery a little. Was thinking of slipping a small silicone pad type heater in between the battery and the box. Don't really want to install it permanently. They make a 25 or 50 watt model. Anyone see any problem doing this. I know they can get rather hot, but I haven't used one this small. The battery is a PC680. This one has a metal case on it. Any thoughts on which size to use? Steve -------- Steve Read this topic online here: http://forums.matronics.com/viewtopic.php?p=465725#465725 ________________________________ Message 13 ____________________________________ Time: 05:21:18 PM PST US Subject: AeroElectric-List: Re: Battery heater From: "user9253" Can a heater be attached to the underside of the battery box so that it does not actually touch the battery? I would be worried about damaging the battery from a localized hot spot. -------- Joe Gores Read this topic online here: http://forums.matronics.com/viewtopic.php?p=465729#465729 ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message aeroelectric-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/AeroElectric-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/aeroelectric-list Browse Digests http://www.matronics.com/digest/aeroelectric-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.