Today's Message Index:
----------------------
1. 08:16 AM - Garmin magnetometer installation. (Rod Smith)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Garmin magnetometer installation. |
=C2-=C2-=C2-=C2-=C2- Thank you Stein for the reference to the wir
ing diagram, I hadn't seen it, had only looked in the magnetometer section.
I figured it would require shielded wiring. The twisted pairs I was referr
ing to are for the other wiring in the same wing, a Whelen LED position/str
obe unit and a Facet fuel transfer pump. Whelen wants 20 ga wire for their
unit and I need 16 gauge wire for the pump. I would buy twisted pair wire f
or these but I only see 22 ga twisted pair wire on your website. Maybe the
best option is to use shielded wire for both.=C2-=C2-=C2-=C2-=C2-
Bob, thanks for your offer on shielded wire. I would need 50' total for th
e two runs to the magnetometer.
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|