---------------------------------------------------------- AeroElectric-List Digest Archive --- Total Messages Posted Sat 03/25/17: 2 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 05:34 PM - Klixon Circuit Breaker (William Hunter) 2. 07:28 PM - Re: ADS-B Antenna Located Next To EMS (William Hunter) ________________________________ Message 1 _____________________________________ Time: 05:34:44 PM PST US From: William Hunter Subject: AeroElectric-List: Klixon Circuit Breaker Hi all, I have a slight spacial conflict problem with the instrument panel design and I need a smaller circuit breaker. I designed my instrument panel with a row of circuit breakers and I have already had the instrument panel holes drilled and the silk screening done for the circuit breaker labels. My landing gear hydraulic motor requires a 30 amp circuit breaker and I placed it's 30 amp Potter and Brumfield W23-x1a1g-30 circuit breaker on the end of the row however I discovered that I have a slight space conflict to the point where the Potter and Brumfield circuit breaker will not fit in its hole. The Klickon 7277 circuit breaker will fit however it seems that they only go up to 25 amps and my landing gear hydraulic power pack motor calls out 30 amps. I am running a 14 VDC system. Does anybody know of a smaller circuit breaker that I could use in lieu of this large Potter and Brumfield unit? I considered running a remote circuit breaker however then I will have this hole in my instrument panel labeled gear hydraulic and that would be just sad to have to roll with that. I am trying to salvage this little issue so I don't have to mark up a brand new instrument panel and move the circuit breaker to another row so any help would be greatly appreciated! Bill Hunter ________________________________ Message 2 _____________________________________ Time: 07:28:59 PM PST US From: William Hunter Subject: Re: AeroElectric-List: ADS-B Antenna Located Next To EMS Thanks Kelly Bill Hunter On Mar 24, 2017 20:07, "Kelly McMullen" wrote: > kellym@aviating.com> > > I wouldn't expect a problem, but would try to get an inch or two of > separation to ensure no interference. > > On 3/24/2017 7:18 PM, William Hunter wrote: > >> Hi all, >> >> I have a velocity aircraft and therefore space is a little tight so I am >> considering mounting my Dynon Skyview EMS module directly onto the >> ground plane of my ADS-B antenna. >> >> If I did this, could there be some sort of interference or noise from >> the ADS-B antenna transmission and the unshielded sensor wires of the >> EMS unit? >> >> THANKS!!! >> >> Bill Hunter >> > > ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message aeroelectric-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/AeroElectric-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/aeroelectric-list Browse Digests http://www.matronics.com/digest/aeroelectric-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.