Today's Message Index:
----------------------
1. 06:38 PM - Re: Re: IVO Prop current limiter (Robert L. Nuckolls, III)
2. 09:26 PM - Re: Re: IVO Prop current limiter (Daniel Hooper)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: IVO Prop current limiter |
At 05:36 PM 5/25/2017, you wrote:
>
>I removed the LEDs from the circuit, and added new LEDs directly to the board.
>
>The behavior is the same as before -- with the engine off, the prop
>and circuit behaved normally. With the engine running, the prop
>current is shut down almost immediately, though a small bit of pitch
>change does occur prior to cut-off.
>
>--------
>Doug
Need to pray over your observations . . .
it would sure be nice to get some
measurements . . . but I think I'll
have an experiment that will help
burrow down to root cause.
Bob . . .
Message 2
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: IVO Prop current limiter |
>>
>> with the engine off, the prop and circuit behaved normally. With the
engine running, the prop current is shut down almost immediately, though
a small bit of pitch change does occur prior to cut-off.
>>
>> --------
>> Doug
Could this have something to do with the higher system voltage when the
engine is running?
=94Daniel
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|