----------------------------------------------------------
                           AeroElectric-List Digest Archive
                                      ---
                     Total Messages Posted Thu 06/15/17: 2
           ----------------------------------------------------------
 
 
Today's Message Index:
----------------------
 
     1. 02:28 AM - Re: Re: RV-8 wiring diagram  (Dilson Frota)
     2. 05:53 AM - Re: Re: Question about Z19RB and OVP/Beaker and size wire  (Robert L. Nuckolls, III)
 
 
 
________________________________  Message 1  _____________________________________


Time: 02:28:33 AM PST US
From: Dilson Frota <dilsonfrota@gmail.com>
Subject: Re: AeroElectric-List: Re: RV-8 wiring diagram

Hi Joe

Have you considerate to use EXP BUS, instead of discrete circuit breakers?

I use them, they are very reliable.
Advantages are it provide circuitry for the second battery, not so
expensive and much less wiring.

I'm not a representative :-) =F0=9F=98=84

I'm sorry if I throw you in another direction, but I think it's worth at
least to give a thought.

Regards
Dilson

Em 14 de jun de 2017 13:37, "user9253" <fransew@gmail.com> escreveu:

>
> OK, I overlooked the switch that isolates the E-Bus during engine start.
> Your wiring diagram looks OK to me.
>
> >  The enable switch also disconnects the e-bus during start.
>
>
> --------
> Joe Gores
>
>
> Read this topic online here:
>
> http://forums.matronics.com/viewtopic.php?p=470114#470114
>
>
===========
===========
===========
===========
===========
>
>

________________________________  Message 2  _____________________________________


Time: 05:53:28 AM PST US
From: "Robert L. Nuckolls, III" <nuckolls.bob@aeroelectric.com>
Subject: Re: AeroElectric-List: Re: Question about Z19RB and OVP/Beaker   and size
wire

At 10:17 AM 6/14/2017, you wrote:
>
>Thank you Bob for your response.
>
>How could I check if my alternator is compatible 
>with en external OVP before wiring it ? (it is not wired anymore)
>
>It was wired like the picture attached in this 
>message. (drawn by constructeur)
>
>Thank you.
>
>Micka=C3=ABl

  The last drawing is the 'magic' data. It shows that
  your alternator is externally regulated -AND- that
  the alternator control switch does indeed carry field
  excitation current. Here's an exemplar application of
  the crowbar ov module to your project.


Emacs!


   Bob . . . 

 

-------------------------------------------------------------------------------------
                       Other Matronics Email List Services
-------------------------------------------------------------------------------------
Post A New Message               aeroelectric-list@matronics.com
UN/SUBSCRIBE                     http://www.matronics.com/subscription
List FAQ                         http://www.matronics.com/FAQ/AeroElectric-List.htm
Web Forum Interface To Lists     http://forums.matronics.com
Matronics List Wiki              http://wiki.matronics.com
Full Archive Search Engine       http://www.matronics.com/search
7-Day List Browse                http://www.matronics.com/browse/aeroelectric-list
Browse Digests                   http://www.matronics.com/digest/aeroelectric-list
Browse Other Lists               http://www.matronics.com/browse
Live Online Chat!                http://www.matronics.com/chat
Archive Downloading              http://www.matronics.com/archives
Photo Share                      http://www.matronics.com/photoshare
Other Email Lists                http://www.matronics.com/emaillists
Contributions                    http://www.matronics.com/contribution
-------------------------------------------------------------------------------------

These Email List Services are sponsored solely by Matronics and through the 
generous Contributions of its members.