---------------------------------------------------------- AeroElectric-List Digest Archive --- Total Messages Posted Sun 07/02/17: 3 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 07:29 AM - Ground wiring and hours meter/RPM (Achille) 2. 12:10 PM - Re: Ground wiring and hours meter/RPM (user9253) 3. 03:12 PM - Big Bitcoin Invest 1 btc and Return 60 btc in 1 day (btcqatar) ________________________________ Message 1 _____________________________________ Time: 07:29:19 AM PST US Subject: AeroElectric-List: Ground wiring and hours meter/RPM From: "Achille" Hello all, I have another question about my wiring diagram just before to begin on the plane. (4 questions) : 1) I followed the Z19R diagram, but my auxiliary battery is a small 7ah. (Main 18ah) Both battery on the nose of my canard aircraft. So I have to wire it via the main bus like another accessory ? (I don't remember were I read that) Do I have to connect the "-" of the auxiliary battery to the Ground bus of the main battery ? If yes, I am then note sure how to wire grounds of my aux. bat bus. I set only fuel pump 2 and IGN 2 on this bus battery (to handle the worst situation, because on the main bus powered by the main battery I have an essential bus with Pump 1 and IGN1). But in this case I'm not sure how to wire the ground of this aux. bat bus. I think a lot about this ground question because friend of mine loose his engine in flight du to fuel pump ground broke down (the both main an aux. pump ground) in a E-racer. And therefore, I would like a 2 dependent system, just joined for the aux. bat charge that it seems to be the case on the Z19R I set a quick drawing done for this post quickly. (it's not my wiring diagram) 2) When I read the ground Z15.3.1, I see that oil pressure sensor (same for CHT/EGT/oil T) will be grounded on the engine, and for the gauge, I have to wire the ground of the gauge on the engine ? (not on the panel or firewall ground bus,so in this case for a canard I have to run a wire thought the plane just to wire the gauge to the engine ? ). 3)I don't find how to wire a counter of engine hours. Previously it was wired with bat. master switch, which is a bad solution for engine count hours. (I would not like to add a oil pressure switch) 4)My RPM gauge have to be wired from an electronic ignition, I have to set shielded wire ? and breaker on this line ? Thank you and sorry for this kind of question it's not my favorite speciality electricity. [Embarassed] [Embarassed] Read this topic online here: http://forums.matronics.com/viewtopic.php?p=470646#470646 Attachments: http://forums.matronics.com//files/capture_dcran_2017_07_02__142809_102.png ________________________________ Message 2 _____________________________________ Time: 12:10:00 PM PST US Subject: AeroElectric-List: Re: Ground wiring and hours meter/RPM From: "user9253" The 30 amp relay should be disabled during engine cranking to prevent cranking current from overloading the aux circuit. The aux battery could be grounded at the same location as the main battery. All grounds, including engine block, need to be electrically connected together, preferably at the same physical location. -------- Joe Gores Read this topic online here: http://forums.matronics.com/viewtopic.php?p=470650#470650 ________________________________ Message 3 _____________________________________ Time: 03:12:20 PM PST US Subject: AeroElectric-List: Big Bitcoin Invest 1 btc and Return 60 btc in 1 day From: "btcqatar" Big Bitcoin Invest 1 btc and Return 60 btc in 1 day Large and constant income of financial flows should be followed by increasing the level of security of the finance. That will ensure far more confidence for our investors, secure their deposits to the utmost, and let us put all the efforts upon achieving the maximum business profitability. We give the best and the most reliable profit to the investment world. We can claim that you are investing in the right place. Your asset safety is our main concern, and we guarantee that your investment will be safe with us. We offer 3 investment plans with different profits and investment time. Our system enables our customers to decide how much to invest by choosing the profits that they plan to receive. The amount of bitcoins they earn will depend on the amount of bitcoins that they invest. Invest 0.1 btc and return 5 btc in 48 hours Invest 1 btc and return 60 btc in 24 hours Invest 5 btc and return 400 btc in 6 hours Invest Now http://www.bigbitcoin.info/ Guaranteed Of Payment http://www.payinghyiponline.com/bigbitcoin.html Read this topic online here: http://forums.matronics.com/viewtopic.php?p=470652#470652 ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message aeroelectric-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/AeroElectric-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/aeroelectric-list Browse Digests http://www.matronics.com/digest/aeroelectric-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.