Today's Message Index:
----------------------
1. 06:59 AM - Re: Re: Non-aero app: 120/240 AC through 24vdc switch? (Robert L. Nuckolls, III)
2. 08:23 PM - Tips for Building a Wiring Harness (Art Zemon)
Message 1
INDEX | Back to Main INDEX |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Non-aero app: 120/240 AC through 24vdc switch? |
At 01:36 PM 8/24/2017, you wrote:
>
>After further investigation, suspicion has grown about the inrush
>current to the power supply that I'm using.
>
>The ballast mfgr says any inrush to the ballast is not a problem for
>the garden-variety installation. The thing that is different about
>my install is the inclusion of a step-down power supply that specs
>40A inrush current...8x the switch spec of 5A.
>
>Stay tuned
>John
Okay, I've lost my mental image of the
configuration. Can you sketch and scan
a schematic of the major components along
with location of the switch?
Bob . . .
Message 2
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Tips for Building a Wiring Harness |
Folks,
I have all but two of the components for my instrument panel in-hand so
it's time to start building the wiring harness. Other than obvious stuff,
like draw it out on paper before starting to solder and crimp, do you have
any tips or suggestions for how to construct this complex piece of wire and
connectors?
Thanks,
-- Art Z.
--
https://CheerfulCurmudgeon.com/
*"If I am not for myself, who is for me? And if I am only for myself, what
am I? And if not now, when?" Hillel*
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|