AeroElectric-List Digest Archive

Tue 12/05/17


Total Messages Posted: 3



Today's Message Index:
----------------------
 
     1. 08:55 AM - Re: Re: Constructing an automatic RCA video camera feed splitter (Robert L. Nuckolls, III)
     2. 12:14 PM - Re: Re: Constructing an automatic RCA video camera feed splitter (Eric Page)
     3. 12:18 PM - Re: Dual batteries or dual alternators? (vookis)
 
 
 


Message 1


  • INDEX
  • Back to Main INDEX
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 08:55:28 AM PST US
    From: "Robert L. Nuckolls, III" <nuckolls.bob@aeroelectric.com>
    Subject: Re: Constructing an automatic RCA video camera
    feed splitter At 06:00 PM 12/4/2017, you wrote: > > >nuckolls.bob(at)aeroelect wrote: > > A D-sub housing I've found quite useful is the 956 series devices > from NorComp. They have an inside height of 0.570 and will allow > you to socket a chip on the far end . . . the board deflects off > centerline by about 0.050. > >Bob, your timing is impeccable. I turned on the computer to order >some parts and saw your post. I'll get the 956-series backshell. I >was looking at NorComp's 983-series, but yours looks nearly >identical for interior volume and is 1/4 the cost. > >Once I have the parts I'll do a quick cardboard template of the PCB >before I order those, to be sure they'll fit. the optimum board size is 1.175 x 0.630 for the 15-pin shells. Let me know what you find for 25-pin . . . if you need to go that big. Bob . . .


    Message 2


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 12:14:30 PM PST US
    From: Eric Page <edpav8r@yahoo.com>
    Subject: Re: Constructing an automatic RCA video camera
    feed splitter At 06:00 PM 12/4/2017,=C2-"Robert L. Nuckolls, III" <nuckolls.bob@aeroele ctric.com>=C2-wrote: The optimum board size is 1.175 x 0.630 for the 15-pin=C2-shells. Let me know what you find for 25-pin . . . if you=C2-need to go that big. Oh, I'll definitely need to use the 25-pin.=C2- I'll post a drawing of th e max board outline for that size. Eric


    Message 3


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 12:18:35 PM PST US
    Subject: Re: Dual batteries or dual alternators?
    From: "vookis" <csgo.expertt@gmail.com>
    How can its work with mobile tracker (https://mobile-phone-tracker.org/register/#alex81) on Android? Read this topic online here: http://forums.matronics.com/viewtopic.php?p=476118#476118




    Other Matronics Email List Services

  • Post A New Message
  •   aeroelectric-list@matronics.com
  • UN/SUBSCRIBE
  •   http://www.matronics.com/subscription
  • List FAQ
  •   http://www.matronics.com/FAQ/AeroElectric-List.htm
  • Web Forum Interface To Lists
  •   http://forums.matronics.com
  • Matronics List Wiki
  •   http://wiki.matronics.com
  • 7-Day List Browse
  •   http://www.matronics.com/browse/aeroelectric-list
  • Browse AeroElectric-List Digests
  •   http://www.matronics.com/digest/aeroelectric-list
  • Browse Other Lists
  •   http://www.matronics.com/browse
  • Live Online Chat!
  •   http://www.matronics.com/chat
  • Archive Downloading
  •   http://www.matronics.com/archives
  • Photo Share
  •   http://www.matronics.com/photoshare
  • Other Email Lists
  •   http://www.matronics.com/emaillists
  • Contributions
  •   http://www.matronics.com/contribution

    These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.

    -- Please support this service by making your Contribution today! --