----------------------------------------------------------
                           AeroElectric-List Digest Archive
                                      ---
                     Total Messages Posted Tue 12/05/17: 3
           ----------------------------------------------------------
 
 
Today's Message Index:
----------------------
 
     1. 08:55 AM - Re: Re: Constructing an automatic RCA video camera feed splitter  (Robert L. Nuckolls, III)
     2. 12:14 PM - Re: Re: Constructing an automatic RCA video camera feed splitter  (Eric Page)
     3. 12:18 PM - Re: Dual batteries or dual alternators?  (vookis)
 
 
 
________________________________  Message 1  _____________________________________


Time: 08:55:28 AM PST US
From: "Robert L. Nuckolls, III" <nuckolls.bob@aeroelectric.com>
Subject: Re: AeroElectric-List: Re: Constructing an automatic RCA video   camera
feed splitter

At 06:00 PM 12/4/2017, you wrote:
>
>
>nuckolls.bob(at)aeroelect wrote:
> > A D-sub housing I've found quite useful is the 956 series devices 
> from NorComp.  They have an inside height of 0.570 and will allow 
> you to socket a chip on the far end . . . the board deflects off 
> centerline by about 0.050.
>
>Bob, your timing is impeccable.  I turned on the computer to order 
>some parts and saw your post.  I'll get the 956-series backshell.  I 
>was looking at NorComp's 983-series, but yours looks nearly 
>identical for interior volume and is 1/4 the cost.
>
>Once I have the parts I'll do a quick cardboard template of the PCB 
>before I order those, to be sure they'll fit.

   the optimum board size is 1.175 x 0.630 for the 15-pin
   shells. Let me know what you find for 25-pin . . . if you
   need to go that big.


   Bob . . . 

________________________________  Message 2  _____________________________________


Time: 12:14:30 PM PST US
From: Eric Page <edpav8r@yahoo.com>
Subject: Re: AeroElectric-List: Re: Constructing an automatic RCA video  camera
feed splitter

At 06:00 PM 12/4/2017,=C2-"Robert L. Nuckolls, III" <nuckolls.bob@aeroele
ctric.com>=C2-wrote:


The optimum board size is 1.175 x 0.630 for the 15-pin=C2-shells. Let me 
know what you find for 25-pin . . . if you=C2-need to go that big.
Oh, I'll definitely need to use the 25-pin.=C2- I'll post a drawing of th
e max board outline for that size.

Eric   

________________________________  Message 3  _____________________________________


Time: 12:18:35 PM PST US
Subject: AeroElectric-List: Re: Dual batteries or dual alternators?
From: "vookis" <csgo.expertt@gmail.com>


How can its work with mobile tracker (https://mobile-phone-tracker.org/register/#alex81)
on Android?


Read this topic online here:

http://forums.matronics.com/viewtopic.php?p=476118#476118


 

-------------------------------------------------------------------------------------
                       Other Matronics Email List Services
-------------------------------------------------------------------------------------
Post A New Message               aeroelectric-list@matronics.com
UN/SUBSCRIBE                     http://www.matronics.com/subscription
List FAQ                         http://www.matronics.com/FAQ/AeroElectric-List.htm
Web Forum Interface To Lists     http://forums.matronics.com
Matronics List Wiki              http://wiki.matronics.com
Full Archive Search Engine       http://www.matronics.com/search
7-Day List Browse                http://www.matronics.com/browse/aeroelectric-list
Browse Digests                   http://www.matronics.com/digest/aeroelectric-list
Browse Other Lists               http://www.matronics.com/browse
Live Online Chat!                http://www.matronics.com/chat
Archive Downloading              http://www.matronics.com/archives
Photo Share                      http://www.matronics.com/photoshare
Other Email Lists                http://www.matronics.com/emaillists
Contributions                    http://www.matronics.com/contribution
-------------------------------------------------------------------------------------

These Email List Services are sponsored solely by Matronics and through the 
generous Contributions of its members.