Today's Message Index:
----------------------
1. 08:16 PM - Diy AOA, anyone ? (GTH)
Message 1
INDEX | Back to Main INDEX |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Diy AOA, anyone ? |
Hi all,
One of my building buddies just challenged me concerning the following
Pitot angle of attack (AOA) device
https://www.thingiverse.com/thing:1121786
Of course 3D printing the device is the easiest part. But does anyone
here happen to have implemented, programmed, etc. an AOA indicator, and
with what success ?
BTW, some years ago I had the opportunity to make a study for such a
device based on differential pressure between upper and lower wing
surface. At the time the study involved a University wind tunnel,
hotwire profiles, several students, but nowadays my approach needs to be
much much "lower tech" as I no longer have access to such facilities.
Thanks for your inputs,
--
Best regards,
Gilles
http://contrails.free.fr
http://lapierre.skunkworks.free.fr
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|