---------------------------------------------------------- AeroElectric-List Digest Archive --- Total Messages Posted Sat 05/12/18: 6 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 01:37 AM - Re: Re: Authority to solder splice a wire (Carlos Trigo) 2. 06:34 AM - Re: Re: Authority to solder splice a wire (Kelly McMullen) 3. 06:46 AM - Re: Authority to solder splice a wire (rampil) 4. 06:56 AM - Re: Re: Authority to solder splice a wire (Art Zemon) 5. 09:22 AM - Re: Re: Authority to solder splice a wire (Ernest Christley) 6. 10:07 AM - Re: Authority to solder splice a wire (Eric Page) ________________________________ Message 1 _____________________________________ Time: 01:37:08 AM PST US From: Carlos Trigo Subject: Re: AeroElectric-List: Re: Authority to solder splice a wire Ira I agree with you, I think shrink wrap was invented only after AC43.13 was published ... Carlos Enviado do meu iPhone No dia 11/05/2018, s 21:22, rampil escreveu: > > I don't think shrink wrap was invented when AC43.13 was written :) > > -------- > Ira N224XS > > > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=480080#480080 > > > > > > > > > ________________________________ Message 2 _____________________________________ Time: 06:34:51 AM PST US Subject: Re: AeroElectric-List: Re: Authority to solder splice a wire From: Kelly McMullen You might be correct about the original version of AC 43-13-1. However, the current version AC 43-13-1B was published Sept 1998, with change 1 issued Sept 2001. Most of the editing was done a few years earlier. I can recall using heat shrink tubing in the early 80's and probably before that. AC 43-13-2B (alterations) was issued even more recently. Those dates straight from the cover of my desk reference copy. Kelly On 5/12/2018 1:34 AM, Carlos Trigo wrote: > > Ira > > I agree with you, I think shrink wrap was invented only after AC43.13 was published ... > > Carlos > > Enviado do meu iPhone > > No dia 11/05/2018, s 21:22, rampil escreveu: > >> >> I don't think shrink wrap was invented when AC43.13 was written :) >> >> -------- >> Ira N224XS ________________________________ Message 3 _____________________________________ Time: 06:46:07 AM PST US Subject: AeroElectric-List: Re: Authority to solder splice a wire From: "rampil" ------> Kelly -------- Ira N224XS Read this topic online here: http://forums.matronics.com/viewtopic.php?p=480088#480088 ________________________________ Message 4 _____________________________________ Time: 06:56:33 AM PST US From: Art Zemon Subject: Re: AeroElectric-List: Re: Authority to solder splice a wire OK... I had to go look it up. Heat-shrink tubing was invented by Raychem Corporation in 1962. See https://en.wikipedia.org/wiki/Heat-shrink_tubing Cheers, -- Art Z. -- https://CheerfulCurmudgeon.com/ *"If I am not for myself, who is for me? And if I am only for myself, what am I? And if not now, when?" Hillel* ________________________________ Message 5 _____________________________________ Time: 09:22:37 AM PST US From: Ernest Christley Subject: Re: AeroElectric-List: Re: Authority to solder splice a wire Just out of curiosity, is there a way to get a diff of what changed in the current version of AC43-13? We always here that its a document written in the blood of others mistakes. =C2- It would be telling to know what new "mistakes" were incorporated, a s well as knowing what new materials and techniques the FAA considers accep table. On Saturday, May 12, 2018 9:57 AM, Art Zemon wrote: OK... I had to go look it up.=C2-Heat-shrink tubing was invented by Rayc hem Corporation in 1962. See=C2-https://en.wikipedia.org/wiki/Heat-shrink _tubing Cheers,=C2- =C2- -- Art Z. -- https://CheerfulCurmudgeon.com/ "If I am not for myself, who is for me? And if I am only for myself, what a m I? And if not now, when?" Hillel ________________________________ Message 6 _____________________________________ Time: 10:07:12 AM PST US Subject: AeroElectric-List: Re: Authority to solder splice a wire From: "Eric Page" echristley(at)att.net wrote: > Just out of curiosity, is there a way to get a diff of what changed in the current version of AC43-13? Look for a black vertical bar in the left margin. It indicates that the text beside it has been changed from the last revision. This obviously doesnt provide a comparison with the superseded text, but if you have the old version as well, it shows where to compare. Eric Read this topic online here: http://forums.matronics.com/viewtopic.php?p=480093#480093 ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message aeroelectric-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/AeroElectric-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/aeroelectric-list Browse Digests http://www.matronics.com/digest/aeroelectric-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.