Today's Message Index:
----------------------
1. 05:27 AM - Seeking DB15 breakout / tester box (Art Zemon)
2. 05:49 AM - Re: Seeking DB15 breakout / tester box (FLYaDIVE)
3. 07:13 AM - Re: Seeking DB15 breakout / tester box (user9253)
4. 07:51 AM - Re: Seeking DB15 breakout / tester box (Eric Page)
5. 03:19 PM - Re: Seeking DB15 breakout / tester box (Robert L. Nuckolls, III)
6. 03:51 PM - Re: Seeking DB15 breakout / tester box (Henador Titzoff)
7. 06:49 PM - Re: Seeking DB15 breakout / tester box (Robert L. Nuckolls, III)
8. 07:29 PM - Re: Seeking DB15 breakout / tester box (Art Zemon)
Message 1
INDEX | Back to Main INDEX |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Seeking DB15 breakout / tester box |
Folks,
I have an RS232 problem between my EFIS and my nav/comm radios and I am
looking for a DB15 breakout box / tester box. Something like this
https://www.viewpointusa.com/product/breakout-boards/15-pin-breakout-interface/
but for a few dollars, not $95
There are cheap versions for DB25 but I'm having trouble finding a DB15
flavor. Any ideas?
-- Art Z.
--
https://CheerfulCurmudgeon.com/
*"We do not see the world as it is. We see the world as we are."*
Message 2
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Seeking DB15 breakout / tester box |
Art:
Don't go crazy with a One Time Use breakout box (B.O.B.).
Get a breadboard and build your own B.O.B..
You should be able to find all the parts for $35.
And... Once you are done with that project you will have the ability to
build more and different projects.
Good breadboards have a Power Strip so hookups are even easier.
https://www.domirobot.com/matsuhama-birlesik-breadboard-1700-pin-pmu392
Barry
On Mon, Aug 20, 2018 at 8:33 AM Art Zemon <art@zemon.name> wrote:
> Folks,
>
> I have an RS232 problem between my EFIS and my nav/comm radios and I am
> looking for a DB15 breakout box / tester box. Something like this
> https://www.viewpointusa.com/product/breakout-boards/15-pin-breakout-interface/
> but for a few dollars, not $95
>
>
> There are cheap versions for DB25 but I'm having trouble finding a DB15
> flavor. Any ideas?
>
> -- Art Z.
>
> --
> https://CheerfulCurmudgeon.com/
>
> *"We do not see the world as it is. We see the world as we are."*
>
Message 3
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Seeking DB15 breakout / tester box |
Try searching eBay for "DB15 Y".
--------
Joe Gores
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=482576#482576
Message 4
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Seeking DB15 breakout / tester box |
Art,
I couldn=99t find a U.S. seller so you may have to wait a few weeks fo
r delivery, but I think this is what you=99re looking for:
https://www.ebay.com/itm/371146139444
A terminal block isn=99t the best connector for a logic probe, but sho
rt lengths of wire should make a workable interface.
Eric
> On Aug 20, 2018, at 05:20, Art Zemon <art@zemon.name> wrote:
> Folks,
>
> I have an RS232 problem between my EFIS and my nav/comm radios and I am lo
oking for a DB15 breakout box / tester box. Something like this https://www.
viewpointusa.com/product/breakout-boards/15-pin-breakout-interface/ but for a
few dollars, not $95
>
>
> There are cheap versions for DB25 but I'm having trouble finding a DB15 fl
avor. Any ideas?
>
> -- Art Z.
Message 5
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Seeking DB15 breakout / tester box |
I've built several over the years. Here's
one cheap-n-dirty approach
https://goo.gl/GBSRVo
If you're in a big hurry and have access
to solder cup connectors, you can hard-wire
one in about 20 minutes with a bit of 22aWG
wire and a soldering iron.
Let me dig around in the junk box . . . I may
have one already built up . . . which you
can have it it exists.
Bob . . .
Message 6
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Seeking DB15 breakout / tester box |
Just out of curiosity, Art, what kind of problem are you having with the RS
-232 link between the EFIS and radios?=C2- Is it a consistent failure or
a glitch.=C2- If it's a glitch, can you tie it to an action or is it a ra
ndom anomaly?=C2- What is the frequency of occurrence?
Henador Titzoff
On Monday, August 20, 2018, 8:44:06 AM EDT, Art Zemon <art@zemon.name>
wrote:
Folks,
I have an RS232 problem between my EFIS and my nav/comm radios and I am loo
king for a DB15 breakout box / tester box. Something like this=C2-https:/
/www.viewpointusa.com/product/breakout-boards/15-pin-breakout-interface/ bu
t for a few dollars, not $95=C2-
There are cheap versions for DB25 but I'm having trouble finding a DB15 fla
vor. Any ideas?
=C2- =C2- -- Art Z.
--
https://CheerfulCurmudgeon.com/
"We do not see the world as it is. We see the world as we are."
Message 7
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Seeking DB15 breakout / tester box |
At 05:18 PM 8/20/2018, you wrote:
>I've built several over the years. Here's
>one cheap-n-dirty approach
>
>https://goo.gl/GBSRVo
>
>If you're in a big hurry and have access
>to solder cup connectors, you can hard-wire
>one in about 20 minutes with a bit of 22aWG
>wire and a soldering iron.
>
>Let me dig around in the junk box . . . I may
>have one already built up . . . which you
>can have it it exists.
Couldn't put my hands on it. Here's
the parts in state-side stock.
https://goo.gl/i31NnY
https://goo.gl/4k3MMi
I can send you a chunk of .05" pitch ribbon
cable if you don't have any.
Bob . . .
Message 8
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Seeking DB15 breakout / tester box |
Thanks for checking, Bob. DB25 breakouts are like $4-6 and readily
available. I was hoping to find a DB15 and save myself some time. I guess
I'll have to make one :-)
Cheers,
-- Art Z.
On Mon, Aug 20, 2018 at 9:05 PM Robert L. Nuckolls, III <
nuckolls.bob@aeroelectric.com> wrote:
> At 05:18 PM 8/20/2018, you wrote:
>
> I've built several over the years. Here's
> one cheap-n-dirty approach
>
> https://goo.gl/GBSRVo
>
> If you're in a big hurry and have access
> to solder cup connectors, you can hard-wire
> one in about 20 minutes with a bit of 22aWG
> wire and a soldering iron.
>
> Let me dig around in the junk box . . . I may
> have one already built up . . . which you
> can have it it exists.
>
>
> Couldn't put my hands on it. Here's
> the parts in state-side stock.
>
> https://goo.gl/i31NnY
>
> https://goo.gl/4k3MMi
>
> I can send you a chunk of .05" pitch ribbon
> cable if you don't have any.
>
>
> Bob . . .
>
--
https://CheerfulCurmudgeon.com/
*"We do not see the world as it is. We see the world as we are."*
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|