Today's Message Index:
----------------------
1. 12:25 PM - Baud rate manipulator (Paul Michel)
2. 02:09 PM - Re: Baud rate manipulator (grnord)
3. 04:59 PM - Re: Baud rate manipulator ()
4. 05:14 PM - Re: Baud rate manipulator (Kelly McMullen)
5. 06:49 PM - Re: Baud rate manipulator (Sebastien)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Baud rate manipulator |
Im looking at replacing my old Garmin 510 with my Mini Ipad & Foreflight fed by
a UAvionics ECHO and UAT. Itll clean all the junk off my glare shield too!
The Garmin was feeding position data to my ACK-04 ELT, 9600 baud MNEA 0183 and
it was happy.
The ECHO has a baud rate of 115200!
Anyone have any ides how to dummy this light-speed rate down to usable 9600 or
4800?
Paul in SUNNY No. Florida
Sent from my iPad
Message 2
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Baud rate manipulator |
Download the "uAvionics Echo Installer" app from the IOS App Store; there's also
an Android version from the Google Play Store. (Don't download the uAvionics
Ping Installer" app by mistake!) It will link your device to the Echo's Wi-Fi
system and lead you through the setup process, including setting data rates
for transmissions to all your avionics and portables. You should also download
the .pdf file for the Echo manual from the uAvionics site.
Rick Nordgarden
Dragonfly Mk IIH
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=489309#489309
Message 3
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Baud rate manipulator |
I'm no expert, and certainly not an IA, but...
If you do find a way to slow the baud rate down to where it is
technically compatible, is the ECHO device "approved" to provide the
position data to the ACK-04 ELT? Is your IA willing to sign off on this
configuration -- meaning he believes this would be acceptable to the
FAA? I've been told by at least one IA that he would NOT sign off on
using the Appareo ESG ADS-B GPS source to feed GPS position to the
ACK-04.
Jim Parker
-------- Original Message --------
Subject: AeroElectric-List: Baud rate manipulator
From: Paul Michel <murphysubaru@yahoo.com>
Date: Mon, May 20, 2019 2:23 pm
To: aeroelectric-list@matronics.com
<murphysubaru@yahoo.com>
Im looking at replacing my old Garmin 510 with my Mini Ipad &
Foreflight fed by a UAvionics ECHO and UAT. Itll clean all the junk
off my glare shield too!
The Garmin was feeding position data to my ACK-04 ELT, 9600 baud MNEA
0183 and it was happy.
The ECHO has a baud rate of 115200!
Anyone have any ides how to dummy this light-speed rate down to usable
9600 or 4800?
Paul in SUNNY No. Florida
Sent from my iPad
Message 4
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Baud rate manipulator |
The ELT GPS source has no technical specs associated with it. You can
use any GPS that outputs the appropriate format. IIRC the ACK manual
suggests a Garmin 35 puck. Any GPS that meets the install manual is
okay. The manual is FAA SARSAT approved. Who cares whether it gets SAR
within 10 meters or 30 meters?
On 5/20/2019 4:58 PM, jim@PoogieBearRanch.com wrote:
>
> I'm no expert, and certainly not an IA, but...
>
> If you do find a way to slow the baud rate down to where it is
> technically compatible, is the ECHO device "approved" to provide the
> position data to the ACK-04 ELT? Is your IA willing to sign off on this
> configuration -- meaning he believes this would be acceptable to the
> FAA? I've been told by at least one IA that he would NOT sign off on
> using the Appareo ESG ADS-B GPS source to feed GPS position to the
> ACK-04.
>
> Jim Parker
>
> -------- Original Message --------
> Subject: AeroElectric-List: Baud rate manipulator
> From: Paul Michel <murphysubaru@yahoo.com>
> Date: Mon, May 20, 2019 2:23 pm
> To: aeroelectric-list@matronics.com
>
> <murphysubaru@yahoo.com>
>
> Im looking at replacing my old Garmin 510 with my Mini Ipad &
> Foreflight fed by a UAvionics ECHO and UAT. Itll clean all the junk
> off my glare shield too!
> The Garmin was feeding position data to my ACK-04 ELT, 9600 baud MNEA
> 0183 and it was happy.
> The ECHO has a baud rate of 115200!
> Anyone have any ides how to dummy this light-speed rate down to usable
> 9600 or 4800?
> Paul in SUNNY No. Florida
>
> Sent from my iPad
>
>
>
>
>
Message 5
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Baud rate manipulator |
The ECHO UAT is easily programmable through the ECHO UAT app for your
phone. Unfortunately the ECHO UAT does not have an internal GPS so you're
asking the wrong question. I take it you have an ECHO UAT with the GRT
Safe-Fly 2020 GPS? If you have a GRT display in your panel wired properly
to the Safe-Fly, the GRT can reprogram the Safe-Fly and you will be able to
wire your ELT to one of the serial outs and set the format and baud rate to
match. If you do not have a GRT display wired and configured properly, you
will be unable to reprogram the Safe-Fly as it comes set from the factory.
On Mon, May 20, 2019 at 5:04 PM <jim@poogiebearranch.com> wrote:
>
> I'm no expert, and certainly not an IA, but...
>
> If you do find a way to slow the baud rate down to where it is
> technically compatible, is the ECHO device "approved" to provide the
> position data to the ACK-04 ELT? Is your IA willing to sign off on this
> configuration -- meaning he believes this would be acceptable to the
> FAA? I've been told by at least one IA that he would NOT sign off on
> using the Appareo ESG ADS-B GPS source to feed GPS position to the
> ACK-04.
>
> Jim Parker
>
> -------- Original Message --------
> Subject: AeroElectric-List: Baud rate manipulator
> From: Paul Michel <murphysubaru@yahoo.com>
> Date: Mon, May 20, 2019 2:23 pm
> To: aeroelectric-list@matronics.com
>
> <murphysubaru@yahoo.com>
>
> I=99m looking at replacing my old Garmin 510 with my Mini Ipad &
> Foreflight fed by a UAvionics ECHO and UAT. It=99ll clean all the j
unk
> off my glare shield too!
> The Garmin was feeding position data to my ACK-04 ELT, 9600 baud MNEA
> 0183 and it was happy.
> The ECHO has a baud rate of 115200!
> Anyone have any ides how to dummy this light-speed rate down to usable
> 9600 or 4800?
> Paul in SUNNY No. Florida
>
> Sent from my iPad
>
>
===========
===========
===========
===========
===========
>
>
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|