Today's Message Index:
----------------------
1. 01:22 AM - Audio panel problem (speedy11@aol.com)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Audio panel problem |
Fellow builders.I need a bit of advice/help.I have a PS Engineering PDA360E
X-R, which is the remote audio panel that is controlled through an EFIS.Thi
s is a retrofit after removing an intercom.=C2- The intercom was mono and
I am attempting to use the original shielded wires because of the difficul
ty of running new wires.I called PS Engineering and asked if I could wire i
t mono.=C2- They said yes by using only the left headphone connection.(No
te: I have called them several times for information on their product, but
they are very reluctant to provide support for their product.=C2- So, if
you purchase any of their products, you can expect minimal support)I have p
inned only the pilot headphone and mic jacks so far, so I cannot doa full t
est of the intercom portion, but, so far, I do not have sidetone.=C2- I d
id an audio test on the AOA, AF3400s, and GTN 650.=C2- In all cases, the
audio has a hollow sound as if the speaker is in a barrel.=C2- Occasional
ly, the audio is normal, but 95% of the time it has the hollow tone.Any ide
as on how to solve the problem?Thanks,Stan SutterfieldRV-8A
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|