Today's Message Index:
----------------------
1. 10:06 AM - Ray Allen trim servo/control: actual wiring schematic needed (Charlie England)
2. 10:44 AM - Re: Ray Allen trim servo/control: actual wiring schematic needed (user9253)
3. 11:09 AM - Re: Re: Ray Allen trim servo/control: actual wiring schematic needed (Charlie England)
4. 12:08 PM - Re: Re: Ray Allen trim servo/control: actual wiring schematic needed (Robert L. Nuckolls, III)
5. 05:07 PM - Molex 4366 terminals for ICOM IC-A210 radio (Peter Campo)
6. 09:22 PM - Re: [OT] IFR-certified GPS Suggestions ()
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Ray Allen trim servo/control: actual wiring schematic |
needed
Anyone out there with an actual schematic of the Ray Allen relay decks,
switches, stick switches, etc? Their on-line 'diagrams' are typical
consumer-facing 'white boxes' for each component, showing nothing of how
the contacts in the device are tied to the various colored wires. I can
spend a day or two puzzling out how the internals are connected, but I'd
love to avoid the waste of time.
The guys at RA were less than worthless, telling me that it would be
'dangerous' to show the consumer (the people actually installing their
stuff) what was going on inside each box on their diagrams. Gotta say, if
there were an alternative, I'd just replace the stuff so I wouldn't have to
deal with them.
Problem: previous owner(s) have panel mounted rockers & indicators for
pitch/roll, and a stick grip with the 4 separate buttons for pitch/roll.
The rockers work. The stick buttons will make the relays click, but don't
control the trim motors.
As I said, I can puzzle it out, but I'd like to *start* with schematics of
the devices, instead of having to create them.
Thanks,
Charlie
Message 2
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Ray Allen trim servo/control: actual wiring schematic |
needed
Do you have these pdf documents from Ray Allen?
http://www.rayallencompany.com/RACmedia/instructionsG2grip.pdf
http://www.rayallencompany.com/RACmedia/do-it-urself1servorelays.pdf
Here is Bob N's circuit:
http://aeroelectric.com/PPS/Flight/Trim/Stick_Grip_Trim.pdf
--------
Joe Gores
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=490332#490332
Attachments:
http://forums.matronics.com//files/trim_motor_control_13_157.jpg
Message 3
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Ray Allen trim servo/control: actual wiring |
schematic needed
On 7/16/2019 12:43 PM, user9253 wrote:
>
> Do you have these pdf documents from Ray Allen?
> http://www.rayallencompany.com/RACmedia/instructionsG2grip.pdf
>
> http://www.rayallencompany.com/RACmedia/do-it-urself1servorelays.pdf
>
> Here is Bob N's circuit:
> http://aeroelectric.com/PPS/Flight/Trim/Stick_Grip_Trim.pdf
>
> --------
> Joe Gores
>
Hi Joe,
I've got the RA cartoon docs. Bob's type of drawing, showing the relay &
switch terminals/internal connections, is what I'm hoping to find for
the RA parts.
Thanks,
Charlie
---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus
Message 4
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Ray Allen trim servo/control: actual wiring |
schematic needed
>Hi Joe,
>
>I've got the RA cartoon docs. Bob's type of drawing, showing the
>relay & switch terminals/internal connections, is what I'm hoping to
>find for the RA parts.
>
>Thanks,
>
>Charlie
Check through the collection of drawings at
https://tinyurl.com/y6yxkbb8
If you're a CAD-driver and can read .dwg
files, I can supply originals for all/any
of those .pdfs
Bob . . .
Message 5
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Molex 4366 terminals for ICOM IC-A210 radio |
Does anyone know a source for the terminals (contacts) for an ICOM IC-A210
card edge connector.
I have the housing (30 Pin Molex 4338) and just need the crimp terminals (M
olex 4366, Molex Part Number=C2-08-03-0304).
The usual distributors (Newark, Mouser, Digi-Key) show these as obsolete.
Thanks in advance,
Peter
Message 6
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | [OT] IFR-certified GPS Suggestions |
Hello Art
If I remember correctly you have MGL equipment, there was a query on the MG
L forum about this, the answer was that MGL was WAAS certified.
Not sure if this was your question or whether you wanted something in addit
ion to your system
Keep well
Mike
From: owner-aeroelectric-list-server@matronics.com <owner-aeroelectric-list
-server@matronics.com> On Behalf Of Alec Myers
Sent: July 13, 2019 3:18 PM
Subject: Re: AeroElectric-List: [OT] IFR-certified GPS Suggestions
I=99m fond of the Avidyne IFD series
On Jul 13, 2019, at 08:05, Art Zemon <art@zemon.name <mailto:art@zemon.name
> > wrote:
This is somewhat off-topic but I figure y'all know a lot about airplanes so
you might have opinions about avionics, too.
I reserved space in my panel for a Garmin 430 WAAS or a Garmin 650. Now tha
t Oshkosh is upon us, perhaps I can save a few pennies on an IFR-certified
GPS that will fit in that hole. It doesn=99t have to be a Garmin; tha
t is just the size hole that I cut when I did the rest of the panel.
What suggestions do you have, both for equipment and vendor?
-- Art Z.
--
https://CheerfulCurmudgeon.com/
Love the stranger for you yourselves were strangers in Egypt. Deut. 10:19
---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|