---------------------------------------------------------- AeroElectric-List Digest Archive --- Total Messages Posted Tue 07/16/19: 6 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 10:06 AM - Ray Allen trim servo/control: actual wiring schematic needed (Charlie England) 2. 10:44 AM - Re: Ray Allen trim servo/control: actual wiring schematic needed (user9253) 3. 11:09 AM - Re: Re: Ray Allen trim servo/control: actual wiring schematic needed (Charlie England) 4. 12:08 PM - Re: Re: Ray Allen trim servo/control: actual wiring schematic needed (Robert L. Nuckolls, III) 5. 05:07 PM - Molex 4366 terminals for ICOM IC-A210 radio (Peter Campo) 6. 09:22 PM - Re: [OT] IFR-certified GPS Suggestions () ________________________________ Message 1 _____________________________________ Time: 10:06:38 AM PST US From: Charlie England Subject: AeroElectric-List: Ray Allen trim servo/control: actual wiring schematic needed Anyone out there with an actual schematic of the Ray Allen relay decks, switches, stick switches, etc? Their on-line 'diagrams' are typical consumer-facing 'white boxes' for each component, showing nothing of how the contacts in the device are tied to the various colored wires. I can spend a day or two puzzling out how the internals are connected, but I'd love to avoid the waste of time. The guys at RA were less than worthless, telling me that it would be 'dangerous' to show the consumer (the people actually installing their stuff) what was going on inside each box on their diagrams. Gotta say, if there were an alternative, I'd just replace the stuff so I wouldn't have to deal with them. Problem: previous owner(s) have panel mounted rockers & indicators for pitch/roll, and a stick grip with the 4 separate buttons for pitch/roll. The rockers work. The stick buttons will make the relays click, but don't control the trim motors. As I said, I can puzzle it out, but I'd like to *start* with schematics of the devices, instead of having to create them. Thanks, Charlie ________________________________ Message 2 _____________________________________ Time: 10:44:07 AM PST US Subject: AeroElectric-List: Re: Ray Allen trim servo/control: actual wiring schematic needed From: "user9253" Do you have these pdf documents from Ray Allen? http://www.rayallencompany.com/RACmedia/instructionsG2grip.pdf http://www.rayallencompany.com/RACmedia/do-it-urself1servorelays.pdf Here is Bob N's circuit: http://aeroelectric.com/PPS/Flight/Trim/Stick_Grip_Trim.pdf -------- Joe Gores Read this topic online here: http://forums.matronics.com/viewtopic.php?p=490332#490332 Attachments: http://forums.matronics.com//files/trim_motor_control_13_157.jpg ________________________________ Message 3 _____________________________________ Time: 11:09:09 AM PST US Subject: Re: AeroElectric-List: Re: Ray Allen trim servo/control: actual wiring schematic needed From: Charlie England On 7/16/2019 12:43 PM, user9253 wrote: > > Do you have these pdf documents from Ray Allen? > http://www.rayallencompany.com/RACmedia/instructionsG2grip.pdf > > http://www.rayallencompany.com/RACmedia/do-it-urself1servorelays.pdf > > Here is Bob N's circuit: > http://aeroelectric.com/PPS/Flight/Trim/Stick_Grip_Trim.pdf > > -------- > Joe Gores > Hi Joe, I've got the RA cartoon docs. Bob's type of drawing, showing the relay & switch terminals/internal connections, is what I'm hoping to find for the RA parts. Thanks, Charlie --- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus ________________________________ Message 4 _____________________________________ Time: 12:08:31 PM PST US From: "Robert L. Nuckolls, III" Subject: Re: AeroElectric-List: Re: Ray Allen trim servo/control: actual wiring schematic needed >Hi Joe, > >I've got the RA cartoon docs. Bob's type of drawing, showing the >relay & switch terminals/internal connections, is what I'm hoping to >find for the RA parts. > >Thanks, > >Charlie Check through the collection of drawings at https://tinyurl.com/y6yxkbb8 If you're a CAD-driver and can read .dwg files, I can supply originals for all/any of those .pdfs Bob . . . ________________________________ Message 5 _____________________________________ Time: 05:07:02 PM PST US From: Peter Campo Subject: AeroElectric-List: Molex 4366 terminals for ICOM IC-A210 radio Does anyone know a source for the terminals (contacts) for an ICOM IC-A210 card edge connector. I have the housing (30 Pin Molex 4338) and just need the crimp terminals (M olex 4366, Molex Part Number=C2-08-03-0304). The usual distributors (Newark, Mouser, Digi-Key) show these as obsolete. Thanks in advance, Peter ________________________________ Message 6 _____________________________________ Time: 09:22:14 PM PST US From: Subject: RE: AeroElectric-List: [OT] IFR-certified GPS Suggestions Hello Art If I remember correctly you have MGL equipment, there was a query on the MG L forum about this, the answer was that MGL was WAAS certified. Not sure if this was your question or whether you wanted something in addit ion to your system Keep well Mike From: owner-aeroelectric-list-server@matronics.com On Behalf Of Alec Myers Sent: July 13, 2019 3:18 PM Subject: Re: AeroElectric-List: [OT] IFR-certified GPS Suggestions I=99m fond of the Avidyne IFD series On Jul 13, 2019, at 08:05, Art Zemon > wrote: This is somewhat off-topic but I figure y'all know a lot about airplanes so you might have opinions about avionics, too. I reserved space in my panel for a Garmin 430 WAAS or a Garmin 650. Now tha t Oshkosh is upon us, perhaps I can save a few pennies on an IFR-certified GPS that will fit in that hole. It doesn=99t have to be a Garmin; tha t is just the size hole that I cut when I did the rest of the panel. What suggestions do you have, both for equipment and vendor? -- Art Z. -- https://CheerfulCurmudgeon.com/ Love the stranger for you yourselves were strangers in Egypt. Deut. 10:19 --- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message aeroelectric-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/AeroElectric-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/aeroelectric-list Browse Digests http://www.matronics.com/digest/aeroelectric-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.