Today's Message Index:
----------------------
1. 10:43 AM - Re: Harbor Freight hydraulic crimper messaroundary (Robert L. Nuckolls, III)
2. 05:46 PM - Re: Harbor Freight hydraulic crimper messaroundary (Robert L. Nuckolls, III)
Message 1
INDEX | Back to Main INDEX |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Harbor Freight hydraulic crimper messaroundary |
>
>Excellent solution here in my limited experience. I soldered up all
>my fat wires on a Z-14 RV-10 (plenty of fat wires there) about 10-12
>years ago. 1200 hours later, all good. The wedges are the key.
>
>One might solder or crimp, but I can see why one might want to avoid
>doing both.
Correct!!!! They are functionally interchangeable differing
only in tools and techniques.
Bob . . .
Message 2
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Harbor Freight hydraulic crimper messaroundary |
>
>Excellent solution here in my limited experience. I soldered up all
>my fat wires on a Z-14 RV-10 (plenty of fat wires there) about 10-12
>years ago. 1200 hours later, all good. The wedges are the key.
>
>One might solder or crimp, but I can see why one might want to avoid
>doing both.
Correct!!!! They are functionally interchangeable differing
only in tools and techniques.
Bob . . .
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|